Activation of trisacryl gels with chloroformates and their use for affinity chromatography and protein immobilization

In this study we describe the activation with chloroformates of Trisacryl-GF-2000, a new synthetic gel support that is stable, hydrophilic, and contains large amounts of hydroxyl groups available for activation. Of all the reagents tested, the activation withN-hydroxysuccinimide-chloroformate andp-nitrophenylchloroformate in organic solvents provides the best activation yield and subsequent coupling. When Trisacryl was activated in acetone with the chloroformates in the presence of 4-dimethylaminopyridine as base and catalyst, up to 30% of the hydroxyl groups, (i.e., 1/repeating unit) could be activated. Amino-containing ligands and proteins could be coupled to these carriers at pH 8 or higher. For better results in affinitychromatographic applications, spacers of ε-amino caproic acid or diaminohexane were introduced. The efficacy of these columns was demonstrated by purification of enzymes, antibodies, and antigens. The performance of these new columns were compared with that of Sepharose columns activated in various ways. In every case, the properties of the Trisacryl support proved superior with particular reference to the purity of the product obtained.     

Preparation of Europium Induced Conformation—specific anti—calmodulin Monoclonal Antibody

Monoclonal antibody technique was employed to detect the conformational difference of CaM induced by metal ions. A trivalent europium ion induced conformation-specific anti-calmodulin monoclonal antibody was successfully prepared with europium-saturated calmodulin as antigen.     

Functionalized Self-Assembled Monolayers on Gold as Binding Matrices for the Screening of Antibody-Antigen Interactions

Two different types of -substituted alkanethiol/disulfide compounds have been used to prepare monolayer architectures on gold serving as platforms for the immobilization of receptor probe molecules – antibodies. These are: (i) carboxylic acid alkanethiols post-reacted with amino biotin to generate streptavidin surfaces, and (ii) N-hydroxysuccinimide-terminated disulfide surfaces. The properties of the monolayers, with and without attached receptor probe molecules, were analysed using infrared spectroscopy, ellipsometry, fluorescence scanning and atomic force microscopy. Several experimental parameters, such as condensation reagents, additives, probe and target concentrations and immobilization time, were systematically varied to determine the dynamic range and to optimize the sensitivity and signal-to-noise ratio of the biochip platforms. Fluorescence screening using Cy5-labelled antigens finally demonstrated that both surfaces could be successfully employed to immobilize the antibodies. The pros and cons of the two approaches are also discussed.Received November 15, 2002; accepted March 25, 2003 Published online July 28, 2003     

Detection of antisperm antibody in human serum using a piezoelectric immunosensor based on mixed self-assembled monolayers

A novel piezoelectric immunosensor based on mixed self-assembled monolayers (mixed SAMs) formed by short-chain amine- and carboxyl-terminated thiols has been developed to immobilize antigens onto gold electrodes for detecting antisperm antibody (AsAb) in human serum samples. The properties and the enhanced performance of the affinity biosensor interface based on mixed SAMs are investigated. Most importantly, analytical results of several human serum samples using the developed technique are in satisfactory agreement with those given by the enzyme-linked immunosorbent assay (ELISA) method in the concentration ranging from 32.3 to 300.0 mU/ml. It means the procedure proposed in this paper is likely to have a great potential in research and may play an important clinical role in a few years later.     

Synthesis of fluorinated materials catalyzed by proline or antibody 38C2 in ionic liquid

The utility of reusable ionic liquid-proline (or aldolase antibody 38C2) reaction system, proceeding the aldol reactions, is described. Further, obtained α-chloro-β-hydroxy compounds were transformed to the optically active α,β-epoxy carbonyl compounds. The aldolase antibody 38C2-ionic liquid system was able to reuse in Michael additions and the reaction of fluoromethylated imines.     

亚甲基蓝为介体的甲胎蛋白免疫传感器的研制及应用

构建了快速测定血清中甲胎蛋白(AFP)含量的电流型免疫传感器,该免疫传感器是用壳聚糖固定电子媒介体亚甲基蓝和辣根过氧化物酶(HRP)标记的甲胎蛋白抗体于一次性丝网印刷碳电极(SPCE)表面制备而成。当该免疫传感器在含AFP样品的溶液中于30℃培育40 min后,抗原抗体的免疫结合会导致HRP标记对过氧化氢电催化氧化的效率降低。在优化的测定条件下,催化效率的降低与AFP浓度在5.0~110.0μg.L-1范围内呈线性关系,免疫分析的检出限为1.4μg.L-1(3σ)。对免疫传感器的精密度作了试验,同一支传感器测试结果的相对标准偏差为6.6%;当取3支用同一方法制备的传感器进行测试时,相对标准偏差为9.3%。放置7d后,传感器对AFP的响应值相当于初试值的88%,在pH 7.0的缓冲溶液中的还原电流为原值的96%。     

Immobilization of Antibodies on Magnetic Carbonaceous Microspheres for Selective Enrichment of Lysine‐acetylated Proteins and Peptides

Lysine acetylation is a dynamic and reversible modification, which has been proved to be a key posttranslational modification in cellular regulation. However, the low amounts of the acetylated proteins could hardly be detected before enrichment. In this study, for the first time, antibody‐immobilized magnetic carbonaceous microspheres were developed for selective enrichment of acetylated proteins and peptides. At first, standard proteins composed of acetylated bovine serum albumin, myoglobin, α‐casein and ovalbumin were used as model proteins to verify the enrichment efficiency. Then, the synthesized peptide was employed to confirm the selectivity of the method. Besides, the antibody‐immobilized magnetic particles were successfully applied to analyze mouse mitochondrial proteins. After database search, 29 acetylated sites in 26 proteins were identi?ed.     

Design of Sensitive Biocompatible Quantum‐Dots Embedded in Mesoporous Silica Microspheres for the Quantitative Immunoassay of Human Immunodeficiency Virus‐1 Antibodies

A novel sandwich‐type electrochemiluminescence (ECL) immunosensor was developed to enable the sensitive detection of HIV‐1 antibodies. This system incorporated mesoporous silica (mSiO₂) complexed with quantum dots (QDs) and nano‐gold particles, which were assembled to enhance signal detection. Magnetic beads were used by immobilizing the secondary anti‐IgG antibody. This was first employed to capture HIV‐1 antibody (Ab) to form a Fe₃O₄/anti‐IgG/Ab complex. A high loading and signal‐enhanced nanocomposite (hereafter referred to as Au‐mSiO₂‐CdTe) was used as a HIV‐1 antigen label. The Au‐mSiO₂‐CdTe nanocomposite was conjugated with the Fe₃O₄/anti‐IgG/Ab complex to form an immunocomplex (hereafter referred to as Fe₃O₄/anti‐IgG/Ab/HIV‐1/CdTe‐mSiO₂‐Au). This complex could be further separated by an external magnetic field to produce ECL signals. Due to the large specific surface area and pore volume of mSiO₂, the loading of the CdTe QDs was markedly increased. Thus, the loaded QDs released a powerful chemiluminescent signal with a concordantly increased sensitivity of the immunosensor. The immunosensor was highly sensitive, and displayed a linear range of responses for HIV‐1 antibody across a dilution range of 1 : 1500 through 1 : 50 with the detection limit of 1 : 4500. The immunoassay can be a promising candidate in early diagnosis of HIV infection.     

Comparison of an antibody and its recombinant derivative for the detection of the small molecule explosive 2,4,6-trinitrotoluene

Antibodies are commonly used as recognition elements in immunoassays because of their high specificity and affinity, and have seen extensive use in competitive assays for the detection of small molecules. However, these complex molecules require production either in animals or by mammalian cell cultures, and are not easily tailored through genetic manipulation. Single chain antibodies (scFv), recombinantly expressed molecules consisting of only the antibody's binding region joined via a linking peptide, can provide an alternative to intact antibodies. We describe the characterization of a new monoclonal antibody (mAb), 2G5B5, able to detect the small molecule explosive 2,4,6-trinitrotoluene (TNT) and the scFv derived from its variable regions. The mAb and scFv were tested by surface plasmon resonance to determine their affinity for an immobilized TNT surrogate; dissociation constants were determined to be 1.5 × 10⁻¹³ M and 4.8 × 10⁻¹⁰ M respectively. Circular dichroism was used to determine their melting temperatures. The mAb is more stable melting at ∼75 °C while the scFv melts at ∼65 °C. The recognition elements were incorporated into a competitive assay format using a bead-based multiplexing platform to examine their sensitivity and specificity. The scFv was able to detect TNT ∼10-fold more sensitively than the mAb in this assay format, allowing detection of TNT concentrations down to at least 1 μg L⁻¹. The 2G5B gave similar detection limits to a commercial anti-TNT mAb, but was less specific, recognizing 1,3,5-trinitrobenzene (TNB) equally well as TNT.