Factors affecting the combustion toxicity of polymeric materials

Fire gas toxicity is an essential component of any fire hazard analysis. However, fire toxicity, like flammability, is both scenario and material dependent. A number of different methods exist to assess the fire toxicity, but many of them fail to relate this to a particular fire scenario. Sample thickness alone, in a closed box test such as the NBS Smoke Chamber, is shown to change the fire scenario from well-ventilated to under-ventilated. Data from two flow-through tests, the static tube furnace (NF X 70-100) and the steady state tube furnace (the Purser furnace, BS 7990 and ISO TS 19700) show that there are different patterns of behaviour for different polymers (LDPE, polystyrene, rigid PVC and Nylon 6.6). The predicted toxicities show variation of up to two orders of magnitude with change in fire scenario. They also show change of at least one order of magnitude for different materials in the same fire scenario. Finally, they show that in many cases CO, which is often assumed to be the most, or even the only toxicologically significant fire gas, is of less importance than either HCl, or HCN, when present, and in some cases less important than organo-irritants. Nylon 6.6 shows the highest predicted toxicity, the greatest scenario dependence, and the least sensitivity to different apparatuses, while polystyrene shows the highest sensitivity to the different apparatuses, but the lowest to different fire scenarios. PVC shows high toxicity, mostly due to HCl in the fire effluent, under all fire conditions, and LDPE shows a more progressive increase in toxicity from well-ventilated flaming to both smouldering and under-ventilated flaming.     

Accreditation of reference material producers: the example of IRMM's Reference Materials Unit

The potential approaches for third-party assessment of reference material producers are revisited and the activities of the Reference Materials (RM) Unit of the Institute for Reference Materials and Measurements (IRMM) to obtain accreditation to ISO Guide 34 and ISO 17025 are described. Accreditation was related to the Unit as all matrix RM activities of the institute are concentrated there. A management system was established that allows sufficient flexibility to be applicable to a wide range of RMs while being precise enough to ensure compliance with ISO Guides 30, 31 and especially 34 and 35. Accreditation was achieved in 2004 with independent scopes for testing and RM production and was confirmed and extended in 2005. The key aspects of the RM Unit's management system for RM production are presented. Presented at BERM-10, April 2006, Charleston, SC, USA     

Comparison of test methods for oxygen permeability: Optical method versus carrier gas method

The oxygen permeability of films is relevant for packaging related and technical applications. An increasingly used test method for the measurement of oxygen permeability is the optical test method, because it allows a simple and cost-efficient measurement setup. This method is based on optical chemical sensors. However, not much is known about its validity. Therefore, method validation is necessary which is subject of this study. The optical method is compared with the carrier gas method for a variety of film samples. In the tested permeability range of 0.5–2500 cm³ (STP)·(m² d bar)⁻¹ both methods deviated less than 20% for zero and 50% relative humidity.     

环境监测实验室管理系统的开发与应用

基于2005版《计量认证/审查认可(验收)评审准则》要求,为满足环境监测实验室业务流程而设计开发了信息管理系统。该系统主要用于环境监测实验室的资源管理和日常自动化办公。系统采用B/S架构,实现全球化办公运作,能对监测样品的受理、分发、分析、原始记录、监测报告、数据三级审核、报告签发实现全程自动流转,并运用工作流和智能表单设计实现实验室程序文件中各类程序和日常办公事务流程的执行;原始记录和监测报告全部实现自动归档及智能查询;同时根据2005版准则中的要求,对人员、设备、材料、环境要素、记录、质量控制等所有要素全面实施网络化管理。     

Certification of reference materials and accreditation of reference material producers: Questionable terminology leads to confusion

In the view of the Deutscher Kalibrierdienst (DKD) , a certifying body for reference materials can be considered to be a calibration laboratory. Therefore, accreditation of calibration laboratories in accordance with ISO/IEC 17025 is the most appropriate way to establish confidence in certificates for reference materials. If necessary, the criteria of ISO/IEC 17025 can be tailored to specific cases. There is no need to provide any new kind of reference-material specific accreditation. However, in view of the variety of reference materials and the practice existing in other countries, accreditation of testing laboratories and product certification bodies may optionally be acceptable as long as the same stringent principles with respect to traceability and measurement uncertainty are applied. Such accreditations but not accreditations of reference material producers (ISO Guide 34) are also covered by existing international mutual recognition arrangements (MRA).     

False Detection of Cyanide Ion in Photographic Processing Waste Solutions Using Standardized Reference Methods

Abstract

Although cyanide compounds are not incorporated in photographic processing solutions, false detection of cyanide ion is often encountered during the determination of total cyanide by various standardized methods such as ISO, ANSI and JIS. Various organic compounds and nitrogen compounds in the processing solutions were examined because of this false detection. The results suggest that hydrogen cyanide is formed by a reaction between these compounds during the distillation process for the separation of total cyanide, even though ISO, ANSI and JIS were used. The results support the following three mechanisms of cyanide formation involved in the process: (1) Hydroxylammonium salts reacts with another ingredient, formaldehyde, to form formaldoxime, which then decomposes to HCN. (2) Hydroxylammonium is oxidized by air to form nitrite ion, which subsequently reacts with organic compounds such as aminocarboxylic acids and aromatic amines (the colour-developing agent) to form HCN. (3) Potassium permanganate oxidizes aromatic amines to form HCN.     

Using a process-centered approach to minimize the effort of compliance

 The complexity of different quality standards can, in principle, be covered by different approaches and strategies. In-depth process mapping of quality control (QC) work streams was used by the analytical laboratories of Lonza AG to show up the principle differences in being compliant to different quality systems. The results identified two main drivers for all necessary actions: process-related activities and infrastructure-related activities. In addition, a clear indication of the economic impact of these driving forces was gained, which led the laboratories to decide on a process-oriented approach. This approach has the advantage of being able to reflect the different demands of different quality assurance (QA) regulations within the same QC organizational structure. Following the process helps avoid unnecessary efforts in analytical work and represents a very economical approach, at the same time, providing high flexibility to react to different QA or customer demands. Received: 5 July 2002 Accepted: 12 November 2002 Acknowledgements The process-oriented approach resulted from many, very challenging discussions for which I would like to thank the staff of my organization (Analytics & QC), especially, the QA staff and the LIMS team. Presented at Analytica Conference, 23–26 April 2002, Munich, Germany Correspondence to B. Ciommer     

Dimensional considerations on the mechanical properties of 3D printed polymer parts

Additive manufacturing offers a useful and accessible tool for prototyping and manufacturing small volume functional parts. Polylactic acid (PLA) and thermoplastic polyurethane (TPU) are amongst the most commonly used materials. Characterising 3D printed PLA and TPU is potentially important for both designing and finite element modelling of functional parts. This work explores the mechanical properties of additively manufactured PLA/TPU specimens with consideration to design parameters including size, and infill percentage. PLA/TPU specimens are 3D-printed in selected ISO standard geometries with 20%, 60%, 100% infill percentage. Tensile and compression test results suggest that traditional ISO testing standards might be insufficient in characterising 3D printed materials for finite element modelling or application purposes. Infill percentage in combination to design size, may significantly affect the mechanical performance of 3D printed parts. Dimensional variation may cause inhomogeneity in mechanical properties between large and small cross section areas of the same part. The effect was reduced in small cross section parts where reducing the nominal infill had less effect on the resulting specimens. The results suggest that for 3D printed functional parts with significant dimensional differences between sections, the material properties are not necessarily homogeneous. This consideration may be significant for designers using 3D printing for applications, which include mechanical loading.     

Quality assurance in research laboratories

During the last decade, it has become increasingly important that researchers demonstrate that research is conducted to the highest standards. The implementation of quality assurance for research laboratories will enable all fields of research and development to be judged impartially. There are no specific standards for research laboratories but where possible, existing standards can be adapted. This review is structured around two approaches. The first considers research to be a logical extension of testing, and it is assumed that testing standards can be applied methodically to each step in a research project. The second advocates a flexible approach, with research-specific criteria for assessing quality. The important papers published on this topic have been reviewed. The conclusions are that the general quality management approach, encompassed by the ISO 9000 series of standards with the emphasis on customer satisfaction and ‘fitness for purpose’, is suitable for implementing quality assurance in research laboratories.     

Robust regression techniques A useful alternative for the detection of outlier data in chemical analysis

The validation of an analytical procedure means the evaluation of some performance criteria such as accuracy, sensitivity, linear range, capability of detection, selectivity, calibration curve, etc. This implies the use of different statistical methodologies, some of them related with statistical regression techniques, which may be robust or not. The presence of outlier data has a significant effect on the determination of sensitivity, linear range or capability of detection amongst others, when these figures of merit are evaluated with non-robust methodologies.In this paper some of the robust methods used for calibration in analytical chemistry are reviewed: the Huber M-estimator; the Andrews, Tukey and Welsh GM-estimators; the fuzzy estimators; the constrained M-estimators, CM; the least trimmed squares, LTS. The paper also shows that the mathematical properties of the least median squares (LMS) regression can be of great interest in the detection of outlier data in chemical analysis. A comparative analysis is made of the results obtained by applying these regression methods to synthetic and real data. There is also a review of some applications where this robust regression works in a suitable and simple way that proves very useful to secure an objective detection of outliers. The use of a robust regression is recommended in ISO 5725-5.