Sample preparation methods for subsequent determination of metals and non-metals in crude oil—A review

In this review sample preparation strategies used for crude oil digestion in last ten years are discussed focusing on further metals and non-metals determination. One of the main challenges of proposed methods has been to overcome the difficulty to bring crude oil samples into solution, which should be compatible with analytical techniques used for element determination. On this aspect, this review summarizes the sample preparation methods for metals and non metals determination in crude oil including those based on wet digestion, combustion, emulsification, extraction, sample dilution with organic solvents, among others. Conventional methods related to wet digestion with concentrated acids or combustion are also covered, with special emphasis to closed systems. Trends in sample digestion, such as microwave-assisted digestion using diluted acids combined with high-efficiency decomposition systems are discussed. On the other hand, strategies based on sample dilution in organic solvents and procedures recommended for speciation analysis are reported as well as the use of direct analysis in view of the recent importance for crude oil field. A compilation concerning sample preparation for crude oil provided by official methods as well as certified reference materials available for accuracy evaluation is also presented and discussed.     

Communication: the essential factor when implementing management systems

Internal communication within a company is essential for the implementation and proper functioning of any ISO-based quality system. Moreover, staff empowerment and distribution of responsibilities are key points in the ISO 9000:2000 quality guides. Although not specifically mentioned in the quality guides, external communication plays a fundamental role in assuring customer satisfaction and obtaining good ideas to improve company performance. This paper has two main parts. First, the importance of internal and external communication is reviewed and it is shown that managers should allocate more resources to both areas. It is also demonstrated that environmental management systems are directly derived from the quality guides. Second, the results of an enquiry to assess the efforts being made by a group of Italian senior managers to improve internal and external communication are evaluated. Received: 8 March 2002 Accepted: 12 September 2002     

Trace analysis of microcontaminations in compliance with ISO 9001: monitoring and diagnostics in large-scale silicon manufacturing

 Severing principles are reported concerning the certification of and quality assurance in a trace-analysis laboratory that handles a large number of real samples, about 60 000 analyses/year with 50 validated methods. ISO 9001 emphasizes monitoring rather than diagnostics. For monitoring purposes the trace-analysis methods must be highly selective and of high precision, with high throughput and uptime within a justifiable economic framework in the analytical range of interest. All trace-analysis methods must be cross-checked using independent analytical tools. The analytical laboratory must be fully integrated in the total quality management of the plant. The analyst must know not only the performance of the trace-analysis tools but also the materials and processes involved in manufacturing. Received: 19 October 1995 Accepted: 15 November 1995     

Estimation of uncertainty in p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> values determined by potentiometric titration

A procedure is presented for estimation of uncertainty in measurement of the pK(a) of a weak acid by potentiometric titration. The procedure is based on the ISO GUM. The core of the procedure is a mathematical model that involves 40 input parameters. A novel approach is used for taking into account the purity of the acid, the impurities are not treated as inert compounds only, their possible acidic dissociation is also taken into account. Application to an example of practical pK(a) determination is presented. Altogether 67 different sources of uncertainty are identified and quantified within the example. The relative importance of different uncertainty sources is discussed. The most important source of uncertainty (with the experimental set-up of the example) is the uncertainty of pH measurement followed by the accuracy of the burette and the uncertainty of weighing. The procedure gives uncertainty separately for each point of the titration curve. The uncertainty depends on the amount of titrant added, being lowest in the central part of the titration curve. The possibilities of reducing the uncertainty and interpreting the drift of the pK(a) values obtained from the same curve are discussed.     

Implementation of ISO 9001 in a medical testing laboratory

 The Department of Clinical Chemistry and Molecular Genetics, within the Institute of Clinical Pathology and Medical Research at Westmead Hospital, is a medical testing laboratory operating within the public sector health system of New South Wales, Australia. It provides acute-care pathology services to Westmead Hospital (a 900-bed tertiary referral university teaching hospital) as well as to three district hospitals and three rural hospitals. In addition to these core clinical chemistry services, it offers approximately 150 specialised biochemistry, pharmacology, toxicology, trace metal and molecular genetics assays as a reference laboratory service. In 1993, the Department became Australia's first medical testing laboratory to be registered to ISO 9001-1987/AS3901-1987. In 1995, this certification was extended to AS/NZS ISO 9001-1994. We are currently preparing for further accreditation to ISO/IEC Guide 25-1990, with additional supplementary requirements for medical testing. This paper describes the Quality System that the Department developed and which has been successfully maintained and extended since original certification. Important features of the Quality System are: 1. Primary design of the Quality System to meet medical and customer needs, with subsequent addition of required ISO elements. 2. Use of national Quality Award criteria to identify key business processes. 3. Development of integrated technical non-conformance, customer complaint, staff suggestion, and quality system corrective action procedures. 4. Implementation without external resources. Our conclusions are that ISO 9000 Quality Systems can be applied to medical testing laboratories, and can be implemented with minimum resource costs. Improvements in technical and service quality and business performance have resulted from this process. However, implementation of ISO 9000 at the level of individual Departments is not ideal. Greater improvements are possible when this process is undertaken at the level of the entire organisation. Received: 9 September 1996 Accepted: 5 October 1996     

Current best practice for traceability in testing laboratories,when certified reference materials are unavailable

Since the implementation of ISO/IEC 17025 in 2002, all accredited laboratories (at the least) need to establish traceability in all their tests and calibration methods. Traceabilty, though well understood in the calibration field (through an unbroken chain of comparisons to the International System of Units —SI), is less straight forward and not so well understood in the testing laboratories. Traceability in analytical and biological testing is found through the use of reference materials, and the validated steps of a test method. This article describes the possibilities to comply with the traceability requirement of ISO/IEC 17025 in testing laboratories , when certified reference materials are unavailable.Presented at the Second International Conference on Metrology—Trends and Applications in Calibration and Testing Laboratories, 4–6 November, 2003, Eilat, Israel     

The view of IRMM on accreditation of CRM producers

This article describes the views of IRMM on accreditation of CRM producers and the philosophy which is behind these views. More specifically, it explains the reasons for choosing ISO Guide 34 rather than ISO/IEC 17025 as the basis document for the proposed accreditation of its CRM activites. Received: 27 May 2002 Accepted: 11 July 2002 Acknowledgements Information on accreditation programmes in Australia and USA provided by Maree Stuart (NATA) and Randall V. Querry (AL2A) is greatly acknowledged. Correspondence to J. Pauwels     

Revision of ISO guide 25

 ISO/IEC guide 25 is the internationally recognised base document for the accreditation of laboratories. Laboratory accreditation is a system of peer assessment and a formal recognition that a laboratory is competent to perform specific tests or types of tests ISO/IEC guide 25 plays a fundamental role in the life of the analytical chemist and is pivotal to the acceptance of the philosophy "once tested everywhere accepted" and to ensuring the mutual acceptance of test data. Within the EU, the attainment of accreditation to ISO/IEC guide 25 has become a way of life and it is now mandatory for laboratories engaged in certain regulatory work areas. Guide 25 is currently under revision and over the past 2 years or so it has been the subject of much debate among the calibration and testing community and it has engendered a considerable amount of written and oral comments. The latest revision entitled "Draft International Standard ISO/IEC DIS 17025: General Requirements for the Competence of Testing and Calibration Laboratories" was circulated to national standard organisations for their "comment and approval" in mid 1998. Voting on this document commenced on 9 July and terminates on 9 December 1998. It is anticipated that a final draft could be circulated in 1999. In accordance with the Vienna agreement this is a parallel ISO/CEN enquiry. This paper will discuss the implications of the technical requirements of the current document for analytical chemistry with particular emphasis on, the strengths, weaknesses and deficits inherent in the draft circulated in July 1998.     

Experiences from the assessment of proficiency testing providers

Following a pilot project in 2001–2002, UKAS accredited nine PT providers. During the course of the pilot and at subsequent surveillance visits, UKAS has gained experience in assessing organisations against the criteria detailed within ISO/IEC Guide 43-1:1997 and ILAC G13:2000. This article explores some of the key aspects that arose during the pilot and how UKAS has accommodated the addition of the accreditation of PT providers in to its range of services.Presented at the Eurachem PT Workshop September 2005, Portorož, Slovenia     

药代动力学实验室液相色谱串联质谱仪期间核查方法的建立

建立符合ISO17025认可要求的药代动力学实验室中液相色谱串联质谱仪的期间核查方法。采用仪器状态及性能核查、仪器比对及全国室间质评等手段,对液相色谱质谱联用仪检测结果的有效性及准确性进行评价。结果为仪器状态及性能核查指标全部合格;仪器比对采用API 3200QTrap与API 4000的测试数据进行比较,结果两组间精密度(ρ=0.072,P>0.05)及均值(ρ=0.380,P>0.05)均无差异;全国室间质评5组盲样的测试浓度均在允许范围内,全部合格通过。2019年度液相色谱质谱联用仪期间核查结果为满意。期间核查可系统评价液相色谱质谱联用仪的性能,提高检测质量,以满足CNAS CL-01:2018对药代动力学实验室仪器的要求。