新型胺基修饰的超高交联聚合吸附剂吸附水中酚类化合物的研究

合成了新的胺基修饰的超高交联AH系列吸附树脂．以弱碱树脂D301和超高交联吸附树脂ND100为参照，测定了AH系列吸附树脂吸附水中苯酚、对氯苯酚、对甲苯酚、对硝基苯酚的吸附性能。结果表明：修饰的超高交联吸附树脂对苯酚．对甲苯酚、对氟苯酚的吸附量比ND100和D301更大，而D301树脂对对硝基苯酚有最大的吸附量．提出了AH系列树脂对4种酚类化合物吸附行为的作用机理．     

铝基氧化铜干法烟气脱硫及再生研究

采用浸渍法制备了XP型和DS型两种铝基氧化铜脱硫剂，并利用制得的脱硫剂进行了烟气循环脱硫-再生实验，同时利用BET、XRD和EPMA等方法研究了载体性质对脱硫剂性能的影响以及脱硫剂的表面微观结构在脱硫和再生过程的变化。实验和分析表明，用于制备脱硫剂的载体应同时具备较大的比表面积和合适的孔结构，实验条件下制得的铝基氧化铜脱硫剂的脱硫效率可达90％，该脱硫剂在多次循环脱硫-再生过程中性能保持稳定。     

Mineral–Carbon Sorbents Based on Aluminium Hydroxide and Atactic Poly(propylene)

The present work is an attempt to use the waste water stream, containing considerable amounts of aluminium chloride, for the manufacture of mineral–carbon sorbents. The use of the wastewater has given a possibility of obtaining a suitable mineral matrix of aluminium hydroxide for the sorbents. Atactic poly(propylene) (APP) have been used as the necessary carbon raw material. The modification of aluminium hydroxide was attained by preliminary mixing with the organic component, followed by carbonisation. Optimum conditions for obtaining Al(OH)₃ have been determined and the effect of the amount of carbon matter on the properties of the materials obtained has been evaluated. The studies have enabled to trace the changes in the structure and properties of the sorbents obtained. This revised version was published online in July 2006 with corrections to the Cover Date.     

Preparation of amino-zirconia bonded phases and their evaluation in hydrophilic interaction chromatography of carbohydrates with pulsed amperometric detection

A series of non-porous, microspherical zirconia-based stationary phases with surface bound amine functionality have been introduced and evaluated in hydrophilic interaction chromatography (HILIC) of underivatized, neutral carbohydrates and anion exchange chromatography of nucleotides using pulsed amperometric detection and ultraviolet detection, respectively. Three aminopropyl alkoxysilane compounds were used in the surface modification of the non-porous zirconia support, namely 3-aminopropyltrimethoxysilane (monoamine), N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (diamine), and trimethoxysilylpropyldiethylenetriamine (triamine). Due to the relatively low specific surface area of the non-porous zirconia support used in this study (ca. 7.3 m²/g), zirconia with surface coating of the triamine type yielded the best results as far as the separations of chitooligosaccharides and maltooligosaccharides are concerned. Since a non-porous zirconia could be readily modified with amine functionality via Zr? O? Si bonds, it is expected that all the three aminopropyl alkoxysilane compounds would yield satisfactory results with porous zirconia microparticles because of their much higher specific surface areas. Although the non-porous zirconia exhibited some limitations, the present study has demonstrated that microspherical zirconia particles are suitable supports for the production of polar sorbents for HILIC of carbohydrates. Another surface modification, which involved the activation of the zirconia surface with aldehyde groups followed by reductive amination with tetraethylenepentamine, was also evaluated. Although this chemistry would in principle yield sorbents with higher concentration in amine groups, the conversion of the majority of the primary amine groups of the tetraethyle-nepetamine molecules to secondary amine functions in the course of the reductive amination reaction have provided a stationary phase that did not afford satisfactory resolution for carbohydrates. However, this same stationary phase behaved as a weak anion exchanger and allowed the high resolution separation of nucleoside-5′-mono-, -di-, and triphosphates. Overall, the results obtained with zirconia-based hydrophilic sorbents paralleled those obtained on amino-silica bonded phases.     

PROPERTIES AND THERMODYNAMICS OF ADSORPTION OF BENZOIC ACID ONTO XAD-4 AND A WATER-COMPATIBLE HYPERCROSSLINKED ADSORBENT

The adsorption behavior of benzoic acid onto a water-compatible hypercrosslinked polymeric adsorbent NJ-8 wascompared with that onto macroporous Amberlite XAN-4. This paper focuses on the static equilibrium adsorption behaviors,the adsorption thermodynamics and the column dynamic adsorption profiles. Five isotherm models are used to fit the results.This shows that the Freundlich equation can give a perfect fit. The specific surface area of NJ-8 is about as high as that ofAmberlite XAD-4, but the adsorbing capacity for benzoic acid on NJ-8 is about 14.9%-64.8% higher than that on AmberliteXAD-4, which is attributed to its microporous mechanism and partial polarity. The negative values of the adsorptionenthalpy are indicative of an exothermic process. Both enthalpy and free energy changes of adsorption manifest a physicalsorption process. The negative values of the adsorption entropy indicate that adsorption is well consistent with the restrictedmobilities and the configurations of the adsorbed molecules on the surface of the studied adsorbents with superficialheterogeneity. Both adsorbents were used in mini-column experiments to demonstrate the higher breakthrough adsorbing capacity of the hypercrosslinked polymeric adsorbent NJ-8 to benzoic acid, as compared with that of Amberlite XAD-4.     

Organosilicon derivatives of 2-mercapto-substituted benzoxazoles,benzothiazoles and benzimidazoles

The interactions of sodium salts of 2-mercaptobenzoxazole, 2-mercaptobenzothiazole and 2-mercaptobenzimidazole with (chloromethyl)trimethyl-, chloromethyl(dimethoxy)methylor (chloromethyl)trimethoxysilanes have been shown to result in the corresponding previously unknown (2-heterylthiomethyl)triorganylsilanes. Transetherification of (2-heteryl-thiomethyl)trimethoxysilanes with triethanolamine gives 1-(2-benzoxazolylthiomethyl)-, 1-(2-benzothiazolylthiomethyl)- and 1-(2-benzimidazolylthiomethyl)silatranes. The reaction of the corresponding alkoxysilanes with boron trifluoride etherate leads to (2-benzoxazolylthiomethyl)- and (2-benzothiazolylthiomethyl)-substituted trifluorosilanes and methyldifluorosilanes having a dragonoid chelate structure. By the hydrolysis of (2-heterylthiomethyl)trimethoxysilanes, new organosilicon sorbents, poly(2-heteryl-thiomethyl)silsesquioxanes have been synthesized.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 1965–1969, November, 1993.     

ADSORPTION OF CHLOROFORM AND TRICHLOROETHYLENE IN WATER WITH A NEW KIND OF HYPERCROSSLINKED RESINS

In this paper two newly developed hypercrosslinked resins were used to treat micropolluted drinking water and their static and kinetic adsorption were investigated at 293 K. The results show that these two adsorbents are superior to Amberlite XAD-4 for removing chloroform and trichloroethylene in aqueous solutions. The breakthrough capacity and the total capacities from mini-column adsorption studies for chloroform and trichloroethylene on XAD-4, ZH-01 and ZH-00 are calculated respectively under experimental conditions     

Synthesis of graphene/hollow carbon fiber composite aerogels for oil spill cleanup

To solve environmental problems caused by the spill of oil and other organic liquids, we have developed graphene/hollow carbon fiber composite aerogels (G-CF) with a low density, high hydrophobicity, buoyancy, and adsorption capacity up to 42.7 g g^–1.     

Structure and absorption volume for hydrogen of ultramicroporous coordination polymers of copper(II) with 4,4′-bipyridine

It was shown that the crystal structure, formed from a polymeric chain, consisting of copper(II) ions or binuclear complexes of copper(II) bonded with 4,4′-bipyridine, can contain pores, suitable for hydrogen molecules. An analysis of the sorption properties of such compounds with respect to hydrogen showed that these depend on the parameters of the pores. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 44, No. 4, pp. 233–239, July–August, 2008.     

STUDY ON SIDE REACTION IN THE SYNTHESIS OF HYPERCROSSLINKED POLYMERS

The systematical study about side reactions have revealed the formation mechanism of oxygen-containing groups of hypercrosslinked polymers. Surface chemistry and functionality of the polymers are characterized by Fourier-transform infrared spectroscopy （FT-IR）, solid state nuclear magnetic resonance （NMR） and contact angle. The results showed that the ether groups were from chloromethylated reaction, and the alcohol groups arose from partial hydrolysis of chloromethyl groups during the post-crosslinking reaction, and the carbonyl functionality was formed by further oxidation of the alcohol groups. Catalyst and solvent used in the postcrosslinking reaction would greatly influence the surface chemistry of the polymer.