Complexes in polymers IV. FTIR microscopic characterization of thin organic polymer films containing embedded transition-metal carbonyl complexes

Thin films of polystyrene (PS), poly(methyl methacrylate) (PMMA) and polystyrene-polyacrylonitrile copolymer (PS-AN), containing various embedded transition-metal complexes, have been studied by FTIR microscopy. The spatial distributions of the transition-metal carbonyl complexes throughout the thin organic polymer films have been determined by a two-dimensional IR mapping procedure. The spectral variations observed in the distribution of the metal carbonyls throughout the different polymer films are discussed. The IR data show that the technique used to prepare the organometallic-embedded thin films (viz. freeze-drying of solutions followed by hot mechanical pressing of the residues) does in general lead to homogeneous films which may eventually find industrial application, e.g. as membrane sensors for small molecules.     

On the rigidity of sphericalt-designs that are orbits of finite reflection groups

The concept of rigid sphericalt-designs was introduced by Bannai. He conjectured that there is a functionf(t, d) such that ifX is a sphericalt design in thed-dimensional Euclidean space so that |X|>f(t, d), theX is non-rigid. Furthermore, he asked to find examples of rigid but not tight sperical designs. In the present article we shall investigate the case whenX is an orbit of a finite reflection group and prove thatX is rigid iff tight for the groupsA _n ,B _n ,C _n ,D _n ,E ₆,E ₇,F ₄,I ₃.Research was partially supported by Hungarian National Research fund Grant No. 4267.     

Electron-stimulated desorption of D (H) from condensed D2O (H2O) films

The electron-stimulated desorption (ESD) of D⁻ and H⁻ ions from condensed D₂O and H₂O films is investigated. Three low-energy peaks are observed in the ESD anion yield, which are identified as arising from excitation of ²B₁, ²A₁ and ²B₂ dissociative electron attachment (DEA) resonances. Additional structure is observed between 18 and 32 eV, which may be due to ion pair formation or to DEA resonances involving the 2a₁ orbital. The ion yield resulting from excitation of the ²B₁ resonance increases as the film is heated. We attribute the increase in the ion yield to thermally induced hydrogen bond breaking near the surface, which enhances the lifetimes of the excited states that lead to desorption.     

Gelation of poly(n-butylisocyanate) in benzene

Poly (n-butylisocyanate)-benzene solutions prepared by solubilization at 45°C, followed by aging at room temperature were found to be metastable for months, although, eventually, they separated into a birefringent polymer-rich phase and an isotropic solution. These metastable solutions, as well as isothermally phase-separated biphasic samples, flowed and exhibited dynamic moduli indicative of low polymer connectivity. By contrast samples prepared by a freeze-thaw cycle were uniformly and highly birefringent and showed network (gel) behavior at room temperature. The mechanism of gel formation is most likely the exclusion of the polymer from the benzene crystal during crystallization, forcing the polymer to align and exist at grain boundaries. Films formed from solutions have different moduli than those formed from gels, and are consistent with the proposed mechanism.     

Boundary G/G Theory and Topological Poisson–Lie Sigma Model

We study a boundary version of the gauged WZW model with a Poisson–Lie group G as the target. The Poisson–Lie structure of G is used to define the Wess–Zumino term of the action on surfaces with boundary. We clarify the relation of the model to the topological Poisson sigma model with the dual Poisson–Lie group G ^* as the target and show that the phase space of the theory on a strip is essentially the Heisenberg double of G introduced by Semenov–Tian–Shansky.     

Light scattering by groups of spherical particles

Light scattering by groups of spherical particles is considered. It is shown that the structure of the groups and their orientational distribution can be judged from the spectrum and polarization of the scattered light. Syktyvkar State University, 55, Oktyabr'skii Ave., Syktyvkar, 167001, Russia. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 2, pp. 228–231, March–April, 1997.     

有机薄膜器件负电阻特性的影响因素

研究了影响有机染料掺杂聚合物薄膜器件负电阻特性的因素，为探索有机负电阻的机理提供实验依据。实验中制备了多种有机染料掺杂聚合物薄膜器件，研究了有机小分子染料、聚合物基体、薄膜组成及厚度、ITO和聚苯胺阳极等对有机染料掺杂聚合物薄膜器件负电阻特性的影响。在室温、大气环境下，所制备的多种有机染料掺杂聚合物器件在所加电压为3～4V时，观察到明显的负电阻特性，电流峰谷比最大约为8。负电阻现象及峰谷比的大小受膜厚和器件的结构、制备工艺等影响。提出用负电阻和二极管并联组成的等效电路模型解释影响负电阻特性的因素，认为负电阻特性与载流子的不平衡注入有关。在此基础上设计、合成了主链含唔二唑电子传输基团的可溶性聚对苯撑乙烯衍生物，该聚合物兼具空穴和电子传输功能，在空气中具有较稳定的N型负电阻特性。进一步控制相关材料和工艺条件，有可能得到易于控制的负阻效应，开发出新型的有机负电阻器件。     

反向驱动的异质结有机薄膜电致发光

成功制备了结构为ITO／PDDOPV／PPQ／Al的异质结聚合物发光二极管。该器件在正反向偏压下均可发光。在正向偏压下的光发射主要来自PDDOPV，但在反向偏压下的光发射则包括来自PPQ的蓝光发射和PDDOPV的黄光发射。蓝光强度与黄光强度的比值随着反向偏压的增加而增加，当反向直流电压分别为22V、24V、26V、28V时，其电致发光光谱中PPQ与PDDOPV的峰高比IPPQ／IPDDOPV分别为1．092、1．329、1．605、2．046。换句话说，该器件的发光颜色是压控可调的，这对实现彩色显示是极为有利的。分析了在反向偏压下的发光机理以及IPPQ／IPDDOPV受电压控制的原因。     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007     

Thermal Effects of Microwave Energy in Agricultural Soil Radiation

The thermal treatment by millimeter waves for the soil disinfection can be one possible alternative to chemical treatments. This physical method is based on incrementing the soil temperature and its pathogens irradiating with high frequency electromagnetic waves. So the previous knowledge of the temperature distribution in the irradiated soil is essential for achieving an effective bad microorganism and weed seeds elimination. This report analyse the heating kinetic and spatial distribution of the maximum temperatures reached by the soil. It is presented a mathematic model about how are distributed the reached temperatures in the depth of the irradiated soil. This model concludes that when an orchard soil is irradiated superficially by microwaves, the microwaves have a big attenuation due to the soil dielectric properties and the water located in the pores of the most superficial layer. This fact causes a shield effect blocking the waves penetration in few centimetres. The heating by radiation is reduced to the superficial layer. The heating propagation in the depth is occurred by conduction following the Fourier equations.