Numerical methods for light propagation in large LC cells: a new approach

Accurate numerical methods for the propagation of light in large 3D samples with strong lateral variation of the director field require prohibitive amounts of time. We consider and compare a standard spectral method and the Finite Difference in Frequency Domain method, showing that the CPU time can be reduced by one or two orders of magnitude using a perturbation approach or a recently developed Reduced Order Method. The equations obtained are applied to liquid crystal cells with in-plane switching, illuminated by a large incoherent source. The developed formalism, based on numerically exact equations, is particularly suitable for treating magnetic or optically active media and for extending to such media the well known approximations based on the 4 × 4 (Berreman) or 2 × 2 (Jones) matrices.     

An Investigation into the Migration of Segments in Crosslinked Fluorinated Polyimide Adhesive

Crosslinked fluorinated polyimides (CFPI) were successfully synthesized to study and explore the effect of cross-linkage on the migration of fluorinated segments and on the adhesion strength. Characterization by dynamic thermomechanical analysis (DMA) and thermo gravimetric analysis (TGA) confirmed good thermal properties of CFPI. X-ray photoelectron spectroscopy (XPS) results showed that the ratio of fluorinated component (6FDA-ODA) concentration of the surface to the bulk decreased with the crosslink density. The water contact angle of CFPI was lower than that of non-crosslinked fluorinated polyimide, indicating that the migration of fluorinated groups to the surface was reduced by the presence of cross-linkage. Therefore, CFPI, with no fluorine segregation on the surface, exhibited excellent wetting of adherent surfaces and adhesion strength, which was proved by lap shear strength (LSS) measurements and scanning electron microscopy.     

Synthesis and characterization of 9,9‐bis(4‐hydroxyphenyl and 4‐aminophenyl)dibenzofluorenes: Novel fluorene‐based monomers

Two novel 9,9‐difunctionalized fluorene‐type monomers, 9,9‐bis(4‐hydroxyphenyl‐ and 4‐aminophenyl)‐2,3:6,7‐dibenzofluorenes, are synthesized by the reaction of dibenzenzofluorenone with phenol and aniline. These monomers are used for the preparation of polyester and polyimide as the typical polymers to evaluate the property change such as thermal stability caused by the benzene rings fused to the fluorene skeleton with keeping good solubility, in comparison with the polymers derived from simple fluorenone. In fact, these two new polymers have the fairly enhanced thermal stability and refractive index value along with satisfactory solubility in organic solvents, enough to emphasize the fusion effect. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2602–2605     

Nonvolatile write‐once read‐many‐times memory behaviors of polyimides containing tetraphenyl fluorene core and the pendant triphenylamine or carbazole moieties

To better understand the structure–property relationships, two novel aromatic diamines containing tetraphenyl fluorene (TPF) moiety through triphenylamine (TPA) unit and carbazole (Cz) unit modification are designed and synthesized, respectively. Four thermally stable and excellent solubility polyimides are prepared and characterized. The excellent film‐formation ability and thin film stability are investigated by X‐ray diffraction (XRD) and atom force microscopy (AFM) measurements, respectively. The memory devices are fabricated, PIs films with low water uptakes sandwiched between indium‐tin oxide (ITO) ground electrode and Al top electrode, and exhibit nonvolatile write‐once read‐many‐times (WORM) memory behaviors with low threshold voltages, due to increasing the retention time through regulating the energy level. The current conduction mechanisms of all devices are linearly fitted by theoretical conduction model. Molecular simulations are used to demonstrate switching mechanism and the memory effects. The experimental results provide a sight for the design‐adjustable switching voltage of memory devices. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1630–1644     

A versatile A2 + B3 approach to hyperbranched polyacenaphthenequinones

A series of hyperbranched polyacenaphthenequinones has been prepared by superelectrophilic aromatic substitution of (substituted) acenaphthenequinone and 1,3,5‐tris‐(4‐phenoxybenzoyl)benzene via a facile A₂ + B₃ approach. Because of the strongly increased reactivity of the second A functionality, gelation was efficiently avoided during the polymerization. The structure of the resulting polymer was characterized by NMR spectroscopy and gel permeation chromatography. Further modification of the hyperbranched polyacenaphthenequinone was explored both on the acenaphthenequinone and aromatic moieties. Moreover, the polymer modified through sulfonation was investigated as a water‐soluble acid catalyst for the degradation of biomass resources. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2596‐2603     

Hyperbranched polyimide application in liquid crystal alignment layers

Several hyperbranched polyimides (HBPIs) were applied in liquid crystal (LC) alignment layers and exhibited outstanding performance for LC alignment. The maximum pretilt angle was above 8°, and the minimum pretilt angle was 4.2°. The results of atomic force microscope measurement disclosed that a lot of grooves were aligned parallel to the rubbing direction and found that the grooves were not main factor for LC alignment. The LC alignment and pretilt angles are unambiguously associated with the intrinsic HBPI chemical structures. The results of thermal gravimetric analysis and ultraviolet–visible spectra showed that the HBPIs had good thermal stability and excellent transmittance. T₅ and T₁₀ were higher than 360°C and 400°C, respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

METHACRYLOYL DERIVITIZED HYPERBRANCHED POLYESTER. 1. SYNTHESIS,CHARACTERIZATION, AND COPOLYMERIZATION

Three hyperbranched multi-methacrylates (H20-MMA, H30-MMA and H40-MMA) have been synthesized by reacting Boltorn dendritic polyols with methacrylic anhydride and methacryloyl chloride. Their structures were characterized by FT-IR and NMR (¹H and ¹³C) and molecular weights were measured by GPC. These multi-methacrylates (H-MMAs) mixed well with a variety of monomers such as acrylic acid (AA), methacrylic acid (MA), methyl methacrylate (MMA), 2-hydroxy-ethyl methacrylate (HEMA), tri(ethylene glycol) dimethdimethacrylate (TEGDMA), and bisphenol A glycidyl dimethacrylate (BisGMA). The initial studies on thermal polymerization activities of 10% of H-MMAs with AA, MA, and MMA showed that they gave higher polymerization enthalpy than the corresponding homopolymerization. The resulting materials showed one glass transition temperature, indicating a typical single-phase resin. The H-MMAs can effectively copolymerize with AA, MA, and MMA, with essentially no homopolymers produced, as indicated by acetone extraction studies. This indicated that the hyperbranched multi-methacrylates have the potential to be used as crosslinking agents or modifiers with a number of monomers to produce new thermosets.     

Toward a light-harvesting Hyperbranched Polyesteramine Host–guest Complex

A novel hyperbranched polyesteramine (PEA) architecture 1 was found to display light-harvesting properties by hosting anthracene-9-carboxylic acid guest 3. The light-harvesting ability has been studied by means of fluorescence spectroscopy. The binding behaviour has also been described by FT-IR and ¹H NMR spectroscopic methods. Hyperbranched host 1 also acts as the photon-harvesting chemosensor of the anthracenyl guest over the benzoic acid guest. Furthermore, the host loaded with the anthracenyl guest also exhibited ‘ON–OFF’ switching on protonation of amine sub-units with HCl, thereby making it of potential use as a pH-assisted photon-harvesting material.     

Development of hyperbranched polymers with non-covalent interactions for extraction and determination of aflatoxins in cereal samples

A novel approach for assembling homogeneous hyperbranched polymers based on non-covalent interactions with aflatoxins was developed; the polymers were used to evaluate the extraction of aflatoxins B1, B2, G1 and G2 (AFB1, AFB2, AFG1 and AFG2) in simulant solutions. The results showed that the extraction efficiencies of three kinds of synthesized polymers for the investigated analytes were not statistically different; as a consequence, one of the representative polymers (polymer I) was used as the solid-phase extraction (SPE) sorbent to evaluate the influences of various parameters, such as desorption conditions, pH, ionic strength, concentration of methanol in sample solutions, and the mass of the sorbent on the extraction efficiency. In addition, the extraction efficiencies for these aflatoxins were compared between the investigated polymer and the traditional sorbent C18. The results showed that the investigated polymer had superior extraction efficiencies. Subsequently, the proposed polymer for the SPE packing material was employed to enrich and analyze four aflatoxins in the cereal powder samples. The limits of detection (LODs) at a signal-to-noise (S/N) ratio of 3 were in the range of 0.012–0.120 ng g⁻¹ for four aflatoxins, and the limits of quantification (LOQs) calculated at S/N = 10 were from 0.04 to 0.40 ng g⁻¹ for four aflatoxins. The recoveries of four aflatoxins from cereal powder samples were in the range of 82.7–103% with relative standard deviations (RSDs) lower than 10%. The results demonstrate the suitability of the SPE approach for the analysis of trace aflatoxins in cereal powder samples.