Evaluation of single-ion conductances in nonaqueous solvents at 25°C by the use of tetrabutylammonium tetrabutylboride as a reference electrolyte

Precise conductances for tetrabutylammonium tetrabutylboride (Bu₄NBBu₄) at 25°C have been measured in a number of nonaqueous solvents, and the data have been analyzed by the 1957 Fuoss-Onsager conductance equation. Limiting ion conductances for the Bu₄N⁺ ion at infinite dilution ₀(Bu ₄ N ⁺) in various solvents have been evaluated by dividing ₀ values of the salt into two equal parts. The ₀(Bu ₄ N ⁺) values so obtained are in fairly good agreement (within±0.1–3.5%) with the corresponding values determined from direct transference number measurements in these solvents.     

A study for quality evaluation of Taxilli Herba from different hosts based on fingerprint-activity relationship modeling and multivariate statistical analysis

In this study, a fingerprint-activity relationship modeling between chemical fingerprints and antirheumatic activity was established, and multivariate statistical analysis was used to evaluate the quality of Taxilli Herba (TH) from different hosts. Characteristic fingerprints of 20 batches of TH samples were generated by high-performance liquid chromatography coupled with triple quadrupole-time of flight tandem mass spectrometry (HPLC-Triple TOF-MS/MS), and the similarity analysis was calculated based on thirteen common characteristic peaks by hierarchical clustering analysis (HCA). Subsequently, nine efficacy markers were discovered by combining fingerprints and antirheumatic activity through grey correlation analysis (GCA) and bivariate correlation analysis (BCA). Meanwhile, the content of 5 constituents in 9 markers was determined by high-performance liquid chromatography coupled with triple quadrupole-linear ion trap tandem mass spectrometry (HPLC-QTRAP-MS/MS). The comprehensive quality of TH was assessed using multivariate statistical analysis, including principal components analysis (PCA) and technique for order preference by similarity to ideal solution (TOPSIS). The results showed that a high dose of TH extract could markedly ameliorate arthritis damage compared to other doses, with flavonoids playing an important role in the antirheumatic activity. The comprehensive quality of samples from Morus alba L. (SS) was superior to those from Liquidambar formosana Hance (FXS). The present study will demonstrate the markers associated with efficacy, and provide an applicable strategy for more comprehensive quality control and evaluation of TH.     

Encapsulation of Mithramycin in Liposomes in Response to a Transmembrane Gradient of Calcium Ions

The recent discovery that mithramycin(MTR) in aqueous solution forms a high affinity[Ca(MTR)4]2- complex led us to the idea thatCa2+-loaded liposomes might be able to accumulateMTR in their aqueous internal compartment. Wetherefore investigated the uptake of MTR into largeunilamellar vesicles (LUV) containing NaCl orCaCl2. Our data show that MTR was efficientlyaccumulated within LUV made fromdipalmitoylphosphatidylcholine and cholesterol, onlywhen the liposomes contained Ca2+ and wereresuspended in a Ca2+-free medium. A drugencapsulation efficiency as high as 60% was achieved,at a drug to lipid molar ratio of 1/18. The circulardichroism and fluorescence excitation spectra ofliposome-encapsulated MTR (LMTR) displayed strongsimilarities with those of the [Ca(MTR)4]2-complex. LMTR was found to be stable, when submittedto conditions that destabilized the[Ca(MTR)4]2- complex. Upon dilution andincubation for 24 h at 37 °C, MTR-containingliposomes did not release a significant amount of MTR.These properties were attributed to the formation ofa high affinity complex between MTR and Ca2+inthe aqueous compartment of liposomes.     

Analytical study of highly condensed non ionic surfactants. Separation on cation exchangers

Summary This study was aimed at optimizing the separation of non-ionic surfactants, resulting from the condensation of ethylene oxide with natural fatty alcohols in the C₁₆ and C₁₈ range (saturated and unsaturated), and presenting a high degree of condensation, i.e. 20 and 25 ethylene oxide units (Brij 99 and KM 25). The cation exchange stationary phase is a partially ionized silica, conditioned in different ways. We have studied the influence of the nature of cations on the separation selectivity. Cations studied included alkali metals (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺), alkaline earth metals (Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺), transition metals (Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Cu²⁺), and quaternary ammonium (NH ₄ ⁺ , NMe ₄ ⁺ ) ions as well as a proton (acetic acid). The influences of ionic strength, pH and addition of cosolvent were examined. A study of the influence of temperature on the system selectivity evidenced a strong interdependance of these two parameters. The optimized conditions [mobile phase: CH₃CN/H₂O (92/8), pH 7.4, sodium acetate 5.10^–3 M; temperature gradient between 25 and 50°C] allowed for the first time the distributions of Brij 99 and KM 25 to be obtained.     

Kinetic Study of the Bromine-Catalyzed Isomerization of Methyl- and Chloro-Maleic Acids in Aqueous Ce(IV)-Br -H2SO4 Medium

Methylmaleic (citraconic, CTA) acid and methylfumaric (measaconic, MSA) acid in aqueous sulfuric acid solution undergo bromine-catalyzed reversible cis-trans isomerization in the presence of ceric and bromide ions. The positional isomerization of CTA or MSA to itaconic acid (ITA) is not observed. The method of high performance liquid chromatography (HPLC) was applied to study the kinetics of this catalyzed isomerization. The major catalytic species is best expressed as the Br^?₂ · radical anion. Under suitable catalytic conditions, there is a tendency for the [MSA]/[CTA] ratio to reach an equilibrium value of 4.10 at 25° for the CTA+Br^?₂ · ? MSA+Br^?₂ · reaction. Chloromaleic (CMA) and chlorofumaric (CFA) acids undergo similar isomerization with an equilibrium [CFA]/[CMA] ratio of 10.3 at 25°. The isomerization of maleic acid (MA) to fumaric acid (FA) is essentially irreversible with 50 as the lower limit of the equilibrium [FA]/[MA] ratio. The substituent has an important effect on the reversibility of this catalyzed isomerization of butenedicarboxylic acids. The thermodynamic parameters ΔH° and ΔS° at 25° for the CTA+Br^?₂ · ? MSA+Br^?₂ · reaction were found to be ?5.1±0.7 kj/mol and ?6.0±3.3 J/mol K, respectively. The present method gives a plausible way to measure the differences in enthalpy and entropy between the trans- and cis-isomers of butenedicarboxylic acids (CRCO₂H=CR'CO₂H) in aqueous solution.     

Synthesis, Structure and Conductivity of the New Charge-transfer Salt (ET)_2(CH_2=CH-CH_2-SO_3)·H_2O

ET is one of the most famous electron-donor molecules, which forms charge-transfer complexes (abbr. CT-complexes) with various types of counterions. These complexes have received intense attention because a wide range of physical properties such as conductivity and superconductivity1, ferromagnetism2-4 and nonlinear optical properties5 was found in these materials. Although the majority of the ET-based CT-complexes were prepared by combining with inorganic counterions, CT-complexes with o…     

Microstructural and physicochemical study of the buried Fe/AlGaAs(100) interface by transmission electron microscopy and x‐ray emission spectroscopy

Among the magnetic metal/semiconductor contacts, the Fe/GaAs system has been widely studied owing to its potential applications in electronic devices. In contrast, there are not many studies concerning the Fe/Al_xGa_1?xAs contact, and in particular there are no reports concerning the changes induced in the interfacial zone by the presence of Al. In this work, thin polycrystalline iron films were deposited by ion beam sputtering at room temperature on a 300 nm thick Al_0.25Ga_0.75As layer grown by molecular beam epitaxy onto GaAs(001). X‐ray diffraction analysis showed that the iron films are polycrystalline, and indications of a (002) texture of the film were observed. The fine scale analysis of the interface was achieved by high‐resolution transmission electron microscopy (HRTEM) observations, the results of which are compared with the physicochemical information obtained from electron‐induced x‐ray emission spectroscopy, by analysing the Al 3p valence states at the Fe/Al_xGa_1?xAs interface. The HRTEM experiments on cross‐section samples indicate that the interfacial zone between iron and AlGaAs is limited to <1.5 nm in thickness. X‐ray emission spectroscopy showed the presence of Al atoms in an FeAl‐like environment at the interface, and the existence of wrong bonds and point defects. The estimated width of the perturbed interface (2.0 ± 0.5 nm) is in agreement with the HRTEM results. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of thiol chelating resins and their adsorption properties toward heavy metal ions

A series of chelating resins, derived from a macroreticular styrene-divinylbenzene (2%) copolymer beads grafted with various poly(ethylene glycols) HO? (? CH₂? CH₂? O? )_n? H(n = 0, 4, 9, 13) and containing thiol groups as chelating functions, have been synthesized in a three-step reaction sequence. The structure of the functionalized resins was confirmed by IR spectrophotometry, elemental analysis, and differential scanning calorimetry. The complexation behavior of these thiol resins was investigated towards Hg(II), Cu(II), and Pb(II) ions in aqueous solution by a batch equilibration technique. The influence of pH on adsorption capacity was also examined. The adsorption values for metal ions' intake followed the order Hg(II) > Cu(II) > Pb(II). The affinity of these polymers towards Hg(II) ions was so high that the total mercury level in the liquid decreased from 20 ppm to below 10 ppb after 2 h of treatment. Polymers can be regenerated by washing with a solution of hydrochloric acid (6N) and 10% by weight of an aqueous solution of thiourea. © 1994 John Wiley & Sons, Inc.     

Polypyrrole Bilayers: Charge Trapping and Application for Amperometric Ions Sensing

Bilayers composed of polypyrrole: doped by perchlorate ions (PPy(ClO₄) – anion exchanging inner layer) and by dodecyl sulfate ions (PPy(DS) – cation exchanging outer layer) are very effective charge trapping systems that are usually not observed for other bilayers comprised of polypyrrole. Chronopotentiometric experiments carried out for oxidation and reduction showed that the trapping effect in the inner layer resulted from different ion exchange properties of the component polymers, leading to a low permeability of the reduced outer layer towards anions. Estimated diffusion coefficients of Cl^? anions in the oxidized and reduced PPy(DS) are in the range of 10^?9 and lower than 10^?10 cm² s^?1, respectively. The presence of the outer layer limiting the ion transfer was found to be beneficial to improve the signal resolution in amperometric mode of ion sensing within wide KCl concentration range, from 10^?5 M up to 3 M. The influence of experimental conditions (film thickness, response time) on optimization of this novel kind of polymeric bilayer ion sensors was studied.     

高温高压下β相硼的电导率测量

 硼在高压下具有复杂的结构和多样的物理性质,对其结构和性质的深入研究具有很重要的意义,一直引起理论和实验研究领域的关注。高压下进行电学性质测量是获得物质物理性质的有效手段,利用集成在金刚石对顶砧上的微电路,在高压下和两个不同温度范围内对β相硼进行了电导率测量,分析了导电机制随压力的变化规律。在0～28.1 GPa范围内,β相硼的电导率随着压力的增大是逐渐增大的,卸压后样品的电导率不能回到最初的状态,是一个不可逆的变化过程;由室温到423 K的范围内,β硼的电导率随着温度的不断增加有明显的上升趋势,并且随着压力的升高,电导率变化逐渐加快。此外,对样品在14.5 GPa和18.6 GPa压力下,用溅射到金刚石对顶砧上的氧化铝薄膜做绝热层,对样品进行了激光加热实验,最高温度达到2 224 K,电导率随着温度的上升而增大,结果显示,β相硼的电学特征仍然属于半导体的特征范围内。