一种新型极性脲丙基-C30固定相的制备和性能评价

以3-脲丙基三甲氧基硅烷为偶联剂，制备了一种新型极性脲丙基-C30（TPU-C30）反相色谱固定相。采用扫描电子显微镜、元素分析、红外光谱和热分析等对该固定相进行表征。结果表明，TPU-C30固定相已成功制备，连续制备3次固定相，其元素含量的相对偏差均小于5%，说明该合成工艺重复性良好。以不同极性、位置异构、碱性化合物为溶质探针，以传统的C18色谱柱与C30色谱柱为参比，对制备的固定相的色谱性能进行了研究。研究结果表明，TPU-C30固定相具有不同于传统C18柱、C30柱的选择性和更优的择形性，明显改善了碱性物质的峰形，其具有广阔的应用空间。     

Analysis of carbohydrates using different quaternized polystyrene-divinylbenzene particles and pulsed amperometric detection

Summary This paper reports on the use of a polymer-based, strong anion-exchange stationary phase for rapid, selective and sensitive analysis of physiological important mono-, di- and oligosaccharides by high-performance anion-exchange chromatography (HPAEC) with pulsed amperometric detection (PAD) under alkaline conditions. The adsorbent was obtained by direct nitration of 3 and 5 μm, spherical non-porous highly cross-linked, styrene-divinylbenzene copolymer (PS-DVB) beads, followed by reduction of superficially introduced nitro groups with nascent hydrogen and quaternization of the resultant amino groups with iodomethane. Extended exposure to high pressure and strong alkaline conditions did not have any untoward effect on mechanical stability and chromatographic performance. A comparison of the 3 and 5 μm beads showed, that the synthesized 3 μm highly cross-linked PS-DVB particles are the preferred phases for the separation of monosaccharides and the 5 μm particles are preferable for the separation of oligosaccharides. To demonstrate the suitability for the analysis of complex samples, the optimized and validated system was used for the determination of glucose, fructose and sucrose in apple juice and other soft drinks such as Coca Cola. Finally, analysis within a few minutes without sample pretreatment down to a lower limit of detection of 0.174–0.504 μg mL⁻¹ at a linearity with R²>0.994 and a repooducibility higher than 98% further confirmed the efficiency of these polymeric sorbents.     

固定有四硫富瓦烯.四氰基奎诺二甲烷的杂聚吡咯膜微葡萄糖电极

铂比互铂化处理后，形成疏松，粗糙的表面，将四硫富瓦烯－四氰基奎诺二甲烷导电有机盐入到铂化的铂黑微粒中。将３－羰基丁酸吡咯与吡咯按适当的比例在其表面用电化学聚合方法，将葡萄糖氧化酶固定于聚合形成的杂聚膜中制成微酶电极。该微酶电极测定时几乎不受氧分压影响，灵敏度高，响应快。     

Synthesis of di-Iron-Containing Inorganic Synzyme, γ-SiW10{Fe(OH2)}2O386?, and the Liquid-Phase Oxidation Catalysis

The Keggin-type di-iron-substituted silicotungstate, -SiW₁₀{Fe(OH₂)}₂O₃₈ ^6– (I), was synthesized by the reaction of the lacunary [-SiW₁₀O₃₆]^8– with Fe(NO₃)₃ in an acidic aqueous solution and isolated as the tetra-n-butylammonium salt (TBA-I). It was characterized by various analyses and the structure with the oxo-bridged di-iron site was clarified. TBA-I was stable and catalyzed selective oxidation of various alkanes and alkenes with hydrogen peroxide: cyclohexane, adamantane, n-hexane, and n-pentane were catalytically oxidized. Even lower alkanes such as methane, ethane, propane, and n-butane were catalytically oxidized. It was remarkable that the efficiency of hydrogen peroxide utilization to oxygenated products reached up to ca. 100% for the oxidation of cyclohexane and adamantane. Alkenes were mainly epoxidized with hydrogen peroxide. It was demonstrated that the TBA-I showed high turnover number of 135–147 for the oxidation of cyclohexane with 1 atm oxygen.     

两种气相色谱固定相的研究

使用硫杂冠醚、穴醚[2.2.2]作气相色谱固定相制备毛细管柱,考察两种固定相的使用比例、极性、热稳定性,并对甲苯-苯、乙苯-甲苯、甲基苯酚（o/p）、二氯苯（o/p,m）、硝基氯化苯（m,o）、苯-环己烷、庚醇-辛醇、苯胺-N,N二甲基苯胺等混合样品进行色谱分离.实验结果表明：两种固定相在OV-1701中的比例均为15%时有较好的分离效果,都属于中等极性的固定相.硫杂冠醚、穴醚[2.2.2]的平均极性分别为815、832,其中硫杂冠醚固定相的热稳定性较好,有较高的使用温度（185℃）,而穴醚[2.2.2]的最高使用温度为120℃,因此穴醚[2.2.2]的使用温度受到一定的限制.从它们较好的分离性能看,固定相硫杂冠醚、穴醚[2.2.2]均具有较好的应用前景.     

Complex copper(II) fluorides. XV. The Ternary System BaF2?CuF2?ScF3

The liquid-solid phase diagram of the binary system BaF₂? ScF₃ is established by D.T.A. and radiocrystallography. Three fluorides are disclosed: Ba₃Sc₂F₁₂, Ba₅Sc₃F₁₉ and a cubic high temperature phase Ba_1?xSc_xF_2+x (x = 0.17), the structure of which derives from that of BaF₂. A solid solution between BaF₂ and ScF₃ is also evidenced at high temperature. The ternary system BaF₂? CuF₂? ScF₃ is investigated by radiocrystallography and an isothermal section at 670°C is given. It shows the existence of four phases: a complex quaternary fluoride Ba₁₀Cu₁₂ScF₄₇, two “polytypic” phases the structure of which derives from that of BaCuF₄ and a tetragonal solid solution Ba₅Sc_3?xCu_xF_19?x with 0 ≤ x ≤ 1.     

嘌呤衍生物在葫芦［6］脲单轮烷键合固定相上的色谱行为

在反相和正相色谱模式下,研究了几种嘌呤衍生物在葫芦［6］脲单轮烷键合硅胶固定相上的高效液相色谱行为,并在反相模式下与ODS固定相进行了比较,考察了流动相中甲醇含量、流动相pH值和离子强度对嘌呤化合物保留的影响。研究结果表明:在反相模式下,嘌呤化合物与葫芦［6］脲单轮烷键合相之间存在多种相互作用,除疏水作用外,分离过程中还存在与ODS不同的色谱分离机制。在正相条件下,多作用力的色谱分离机制同样存在。葫芦［6］脲单轮烷键合相与溶质之间存在疏水、氢键、π-π和偶极-偶极等多种作用力,协同作用提高了固定相对嘌呤化合物的分离选择性。     

Perfluoro-1,3,5-tris(p-oligophenyl)benzenes: Amorphous Electron-Transport Materials with High-Glass-Transition Temperature and High Electron Mobility

Perfluoro-1,3,5-tris(p-quaterphenyl)benzene (PF-13Y) and perfluoro-1,3,5-tris(p-quinquephenyl)benzene (PF-16Y) have been synthesized and characterized. They showed higher glass transition temperatures compared with perfluoro-1,3,5-tris(p-terphenyl)benzene (PF-10Y). Organic light-emitting diodes were fabricated using these materials as the electron-transport layers. PF-13Y and -16Y are better electron transporters than PF-10Y. The electron mobilities of PF-10Y and Alq₃ were measured by the time-of-flight technique. PF-10Y showed higher electron mobilities (10⁻⁴ cm²/V s) and weaker electric field dependence compared with Alq₃.     

Phosphines: Nucleophilic organic catalysts for the controlled ring‐opening polymerization of lactides

A new metal‐free synthetic approach to the controlled ring‐opening polymerization (ROP) of lactide with nucleophilic phosphines as transesterification catalysts is described. P(Bu)₃, PhPMe₂, Ph₂PMe, PPh₃, and related phosphines are commercially available, inexpensive catalysts that generate narrowly dispersed polylactides with predictable molecular weights. These organic catalysts must be used in combination with an initiator, such as an alcohol, to generate an alcoholate ester α‐end group upon ROP. A likely polymerization pathway is through a monomer‐activated mechanism, with minimal active species, facilitating narrow molecular weight distributions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 844–851, 2002; DOI 10.1002/pola.10168     

Use of blowing catalysts for integral skin polyurethane applications in a controlled molecular architectural environment: Synthesis and impact on ultimate physical properties

Polyurethane elastomers of a controlled molecular architecture were synthesized using a two‐step polymerization technique. The building blocks of the elastomeric materials included urea–urethane prepolymers end‐capped with diisocyanate groups and had an exact number of urea groups at both ends. Two‐dimensional bifurcated hydrogen‐bonding networks incorporating the urea groups were, with differential scanning calorimetric and dynamic mechanical thermal analyzer techniques, responsible for the increase in the glass‐transition temperature (T_g) of the hard block and sharp interface morphology between the pure “hard” domains and pure “soft” domains. The higher extent of the phase separation between the two phases contributed to higher elastic moduli for the hard blocks and higher tensile strength for the elastomeric samples. Higher elongation values were attributed to the liberation of the elastomeric chain ends that otherwise would have been constrained in the interface region. The higher T_g values of the hard blocks corresponded to an increase in the hardness values and a decrease in the tear‐strength values. The increase in the amount of urea groups within the hard segments, as a result of the increased amount of water and blowing catalyst, resulted in elastomeric foams with higher open‐cell content. This resulted in lower resilience values as measured using the pendulum rebound test and was attributed to the ability of the open cells to absorb and dissipate energy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2526–2536, 2002