Surface modified silver selinide nanoparticles as extracting probes to improve peptide/protein detection via nanoparticles-based liquid phase microextraction coupled with MALDI mass spectrometry

We report the first use of functionalized Ag₂Se nanoparticles (NPs) as effective extracting probes for NPs-based liquid-phase microextraction (NPs-LPME) to analyze hydrophobic peptides and proteins from biological samples (urine and plasma) and soybean in matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). Surface modified functional groups such as octadecanethiol (ODT) and 11-mercaptoundecanoic acid (MUA) on Ag₂Se NPs were found to play an important role for efficient extraction of peptides and proteins from test samples through hydrophobic interactions. The peptides can be efficiently extracted using functionalized Ag₂Se NPs as extracting probes in the presence of high concentration of matrix interferences such as 4 M urea, 0.5% Triton X-100 and 3% NaCl. Ag₂Se@ODT NPs have shown better extraction efficiency and detection sensitivity for peptides than Ag₂Se@MUA NPs, bare Ag₂Se NPs and conventional MALDI-MS. The LODs are 20-68 nM for valinomycin and 100-180 nM for gramicidin D using Ag₂Se@ODT NPs-LPME in the MALDI-MS. The current approach is highly sensitive and the target analytes can be effectively isolated without sample loss and efficiently analyzed in MALDI-MS.     

表面活性含氟单体-丙烯酰胺共聚物溶液性质研究

以异佛尔酮二异氰酸酯(IPDI)、十二氟庚醇(FOH)、烯丙基聚乙二醇(APEG)合成的表面活性含氟单体(FSM)与丙烯酰胺通过水溶液聚合,制备出含氟疏水缔合聚丙烯酰胺(FPAM).用表面张力法研究了FSM的胶束化,用流变仪、动态激光光散射(DLS)和原子力显微镜(AFM)表征了FPAM溶液的流变性能、缔合结构尺寸和形态.结果表明,FSM在25℃下CMC为1.28 g.L-1,表面张力为26.77 mN.m-1.FPAM溶液属于假塑性体系,临界缔合浓度为0.660%,具有一定的耐盐性.DLS和AFM表明,在低于临界缔合浓度时FPAM溶液仍能产生大量的缔合结构,FPAM分子具有很强的疏水缔合性.     

Organic-inorganic hybrid superhydrophobic surfaces using methyltriethoxysilane and tetraethoxysilane sol-gel derived materials in emulsion

By applying alkaline-catalyzed co-hydrolysis and copolycondensation reactions of tetraethoxysilane (TEOS) and methyltriethoxysilane (MTES) in organic siloxane modified polyacrylate emulsion (OSPA emulsion), we are able to demonstrate the potential for developing a sol-gel derived organic-inorganic hybrid emulsion for a superhydrophobic surface research. TEOS and MTES derived sol-gel moieties can be designed for a physical roughness and hydrophobic characteristic (Si-CH₃) of the hybrid superhydrophobic surface, while OSPA emulsion can be endowed for good film-forming property. The effect of formulation parameters on superhydrophobicity and film-forming property was analyzed. The water contact angle (WCA) on the sol-gel derived hybrid film is determined to be 156°, and the contact angle hysteresis is 5° by keeping the mole ratio of TEOS:MTES:C₂H₅OH:NH₃·H₂O:AMP-95 at 1:4:30:10:0.63 and the mass percentage of OSPA emulsion at 25%. The nanoparticle-based silica rough surface is observed as the mole ratio of MTES/TEOS at 4:1. The sol-gel derived organic-inorganic hybrid emulsion shows remarkable film-forming property when the mole ratio of MTES/TEOS reaches or exceeds 4:1. With the primer coating, the performance of superhydrophobic film achieve actual use standard. It reveals that this new procedure is an effective shortcut to obtain a superhydrophobic surface with potential applications.     

RF-PACVD of water repellent and protective HMDSO coatings on bell metal surfaces: Correlation between discharge parameters and film properties

Hexamethyldisiloxane (HMDSO) films have been deposited on bell metal using radiofrequency plasma assisted chemical vapor deposition (RF-PACVD) technique. The protective performances of the HMDSO films and their water repellency have been investigated as a function of DC self-bias voltage on the substrates during deposition. Plasma potential measurements during film deposition process are carried out by self-compensated emissive probe. Optical emission spectroscopy (OES) analyses of the plasma during deposition reveal no significant change in the plasma composition within the DC self-bias voltage range of −40 V to −160 V that is used. Raman and X-ray photoelectron spectroscopy (XPS) studies are carried out for film chemistry analysis and indicate that the impinging ion energy on the substrates influences the physio-chemical properties of the HMDSO films. At critical ion energy of 113 qV (corresponding to DC self-bias voltage of −100 V), the deposited HMDSO film exhibits least defective Si-O-Si chemical structure and highest inorganic character and this contributes to its best corrosion resistance behavior. The hardness and elastic modulus of the films are found to be bias dependent and are 1.27 GPa and 5.36 GPa for films deposited at −100 V. The critical load for delamination is also bias dependent and is 11 mN for this film. The water repellency of the HMDSO films is observed to be dependent on the variation in surface roughness. The results of the investigations suggest that HMDSO films deposited by RF-PACVD can be used as protective coatings on bell metal surfaces.     

Fabrication of durable hydrophobic surfaces through surface texturing

Low surface energy polymer thin-films can be applied to surfaces to increase hydrophobicity and reduce friction for a variety of applications. However, wear of these thin films, resulting from repetitive rubbing against another surface, is of great concern. In this study, we show that highly hydrophobic surfaces with persistent abrasion resistance can be fabricated by depositing fluorinated carbon thin films on sandblasted glass surfaces. In our study, fluorinated carbon thin films were deposited on sandblasted and as-received smooth glass using deep reactive ion etching equipment by only activating the passivation step. The surfaces of the samples were then rubbed with FibrMet abrasive papers in a reciprocating motion using an automatic friction abrasion analyzer. During the rubbing, the static and kinetic friction forces were also measured. The surface wetting properties were then characterized using a video-based contact angle measuring system to determine the changes in water contact angle as a result of rubbing. Assessment of the wear properties of the thin films was based on the changes in the water contact angles of the coated surfaces after repetitive rubbing. It was found that, for sandblasted glass coated with fluorinated carbon film, the water contact angle remained constant throughout the entire rubbing process, contrary to the smooth glass coated with fluorinated carbon film which showed a drastic decrease in water contact angle with the increasing number of rubbing cycles. In addition, the static and kinetic friction coefficients of the sandblasted glass were also much lower than those of the smooth glass.     

Aminocalix[4]arene: the effect of pH on the dynamics of gate and portals on the hydrophobic cavity

The pH of a solution shows a significant effect on the dynamics of the gate (formed by eight benzylic functions) and portal on the hydrophobic cavity of receptor. At pH 5.8 the gate closes and prohibits the entry of anionic guests. However, at pH 7.3 the gate opens and allows the entry of anionic guests into the hydrophobic cavity. It is the first time that anionic receptor efficiently recognizes anionic guests.     

Significance of hydrophobic interactions in water–organic binary solvents

A LFE (Linear Free Energy) analysis of kinetic data for different organic reactions in various organic aqueous solutions was carried out. The rate constants of these reactions were compared with those for the solvolysis of tert-butyl chloride in the same solvents in terms of the LFE Relationships, and linear plots were observed in a wide range of the co-solvent content. This similarity points to a common nature of the solvent effect in these reactions in variety of water–organic mixtures, regardless of largely different reaction mechanisms. We explain these results by the prevalence of hydrophobic stabilization of the initial state of these reactions in water-rich solvent mixtures. Recently the same conclusion was also made on the basis of investigations into sonication effects in kinetics of organic reactions. A considerable contribution of hydrophobic effects to the Y scale by Grunwald and Winstein was deduced.     

Raman scattering spectra of Aerosol-OT homologous sodium dialkylsulfosuccinates and the environment of their hydrophobic chains

 A homologous series of sodium dialkylsulfosuccinates (SDAS) has been synthesized with various chain lengths (dibutyl, dihexyl, diheptyl, dioctyl, dinonyl, didecyl, diundecyl and didodecyl). These compounds are straight-chain analogues for Aerosol-OT. Raman scattering spectra have been recordered for these SDAS compounds, both in the solid state and in aqueous solutions. These spectra are analyzed in detail in the CH stretch and CH₂ deformation regions, and the results depend specifically on the length of the hydrocarbon chain. In particular, the longitudinal accordion-like vibrational modes coming from the all-trans n-alkyl chains have been investigated. For the SDAS dihydrates, all hydrocarbon chains take up an extended form, whereas for the monohydrates the tails tend to become disordered at the CH₂-CH₂ single bond close to the terminal methyl groups. It has also been confirmed that for the concentrated aqueous SDAS (sodium dibutylsulfosuccinate – sodium dioctylsulfosuccinate) samples preferential stabilization of the extended conformation of the hydrocarbon chain may occur. Received: 23 February 1999 Accepted: 10 May 1999     

Versatile self-assembled hybrid systems with exotic structures and unique functions

In this review article, we describe recent progress about exotic self-assembled systems with various dimensions including biomolecules, supramolecules, unique hydrophobic amphiphiles, polymers, nano-clusters, and colloidal particles. Construction of robust biomolecular assemblies with exotic structures, such as ring and hollow capsule, is achieved by rational designs of symmetric biomolecular conjugates. In addition, we comprehensively summarized leading-edge topics on optical/topological properties of self-assembled hybrid systems, such as circularly polarized luminescence or structural color. The preparation of colloidal amorphous array with photonic band gap-induced angle-independent structural color is also achieved in consideration of the following situations: i) two-body sphere–sphere potential, ii) disorder packing using different sizes of colloidal particles, and iii) softness of colloidal particles. Lastly, we demonstrated useful utilizations of exotic self-assembled objects. Flakelike microparticles were transcribed into various nano-flake metals and applied as temperature indicator for the local heating of an addictive. All findings described here show meaningful hybrid strategies in self-assembly techniques and their functionalization as well as materialization.     

室温固化疏水性聚合物涂层研究

结霜问题广泛存在于制冷和低温领域并降低制冷系统的运行效率及运行稳定 .为防止在材料表面附着小水滴并结霜 ,通常的表面改性方法有 :(1 )涂敷亲水性聚合物[1] ,通过提高表面的亲水性来使水滴铺张 ,但附着的水滴易使表面膨胀、强度降低并破坏与基材的粘结力 ;(2 )涂敷疏水性聚合物 ,它们一般含有大量低表面能的硅、氟等原子基团 ,通过提高表面的疏水性来提高表面对水滴的接触角 ,并使水滴滑落 ,但通常认为涂层对基材的粘接力低且强度及耐久性差[2 ] .氟树脂涂料具有优良的耐候性、耐腐蚀性、耐沾污性、耐热性、耐化学品性、斥水斥油性、绝…