酸性条件下硅醇盐Si(OCH_3)_4水解与聚合机理的密度泛函研究

用密度泛函方法在B3LYP/6-31G(d,p)基组水平上对反应系统中的所有物种进行全优化,用CPCM溶剂模型在同一基组水平上进行了单点计算,系统研究了硅醇盐前驱体Si(OCH3)4在酸性条件下的水解、聚合机理,阐明了二者的相互竞争关系.研究发现,H2O以氢键或配位键与前驱体结合,然后通过氢转移完成水解;水分子从质子化烷氧基的对面键合并发生水解;第4级水解是H2O从对位驱逐质子化烷氧基,但不能水解完全;水解产物通过"环状模式",由氢键结合成多元环,然后发生氢转移并完成聚合;水解过程的能垒明显低于聚合过程;H+阻止水解产物聚合成环;硅正离子可引发无垒聚合反应,但在能量上并不可行.     

邻氨基二苯醚类重氮盐的水解及分子内缩合反应

用邻氨基二苯醚类化合物进行重氮化水解反应制备邻羟基二苯醚类化合物, 对影响氯代邻氨基二苯醚重氮盐水解反应和分子内关环反应的因素进行了系统研究, 讨论了取代基、金属及其离子催化等对两类反应的影响规律, 揭示了在金属离子催化下, 邻氨基二苯醚类化合物重氮盐发生分子内关环反应的规律, 并推测了反应机理.     

Synthesis and Hydrogen-Bond Patterns of Aryl-Group Substituted Silanediols and -triols from Alkoxy- and Chlorosilanes

Organosilanols typically show a high condensation tendency and only exist as stable isolable molecules under very specific steric and electronic conditions at the silicon atom. In the present work, various novel representatives of this class of compounds were synthesized by hydrolysis of alkoxy- or chlorosilanes. Phenyl, 1-naphthyl, and 9-phenanthrenyl substituents at the silicon atom were applied to systematically study the influence of the aromatic substituents on the structure and reactivity of the compounds. Chemical shifts in ²⁹Si NMR spectroscopy in solution, correlated well with the expected electronic situation induced by the substitution pattern on the Si atom. ¹H NMR studies allowed the detection of strong intermolecular hydrogen bonds. Single-crystal X-ray structures of the alkoxides and the chlorosilanes are dominated by π-π interactions of the aromatic systems, which are substituted by strong hydrogen bonding interactions representing various structural motifs in the respective silanol structures.     

A comparative study on chemical conversion of cellulose between the batch-type and flow-type systems in supercritical water

Microcrystalline cellulose (avicel) was treated in supercritical waterusing batch-type and flow-type systems. The flow-type system made it possibletoshorten the heating, treating and cooling times, compared with the batch-typesystem. As a result, the flow-type system was able to liquefy avicel withoutproducing any supercritical water-insoluble residue. Although hydrolyzedproducts such as glucose and fructose, and pyrolyzed products such aslevoglucosan, 5-hydroxymethyl furfural, erythrose, methylglyoxal,glycolaldehydeand dihydroxyacetone were found in common from the water-soluble portiontreatedby both systems, the flow-type system gave a water-soluble portion with morehydrolyzed and less pyrolyzed products, together with water-solubleoligosaccharides consisting of cellobiose to cellododecaose and theirdecomposedproducts at their reducing end of glucose, such as[–glucopyranosyl]_1–11 –levoglucosan,[–glucopyranosyl]_1–11 –erythrose and[–glucopyranosyl]_1–11 –glycolaldehyde. Inaddition, the precipitates of polysaccharides were recovered after 12h setting of the water-soluble portion. These results indicatedthat the flow-type system can hydrolyze cellulose with minimizing pyrolyzedproducts. On the other hand, the batch-type system resulted in a higher yieldof the pyrolyzed products due to the longer treatment, but a higher yield ofglucose due possibly to the higher pressure and concomitantly higher ionicproduct of water. Based on these lines of evidence, the process to increase theyield of the sugar is discussed under supercritical water treatment.     

Facile Hydrolysis of Esters with KOH-Methanol at Ambient Temperature

Summary. A simple, rapid, and efficient method is reported for the hydrolysis of a variety of mono- and diesters of aromatic, aliphatic, fatty, and heterocyclic acids with potassium hydroxide in methanol at ambient temperature (35°C).     

Facile Assembly of Dispersed ZrMCM‐41 Nanoparticles Promoted in‐situ by Zirconium Salt

Mesoporous ZrMCM‐41 nanoparticles were synthesized by a usual way where tetraethyl‐orthosilicate (TEOS) and zirconium nitrate were used as the inorganic precursors. The obtained nanoscale ZrMCM‐41 was characterized by X‐ray diffraction, N₂ physis‐sorption, scanning electron microscopy and transmission electron microscopy. Characterization results revealed that zirconium salt added in the synthesis had a crucial effect on the assembly of nanoscale ZrMCM‐41 with relatively uniform particle size, which was rarely observed in reported studies for ZrMCM‐41 synthesized using the similar method. Meanwhile, the possible mechanism behind the synthesis was discussed based on the character of hydrolysis and condensation of TEOS and the mild acidic environment induced by the hydrolysable zirconium salt under aqueous conditions. Thus obtained nanoscale ZrMCM‐41 with developed pore structures may be advantageous to general applications in catalysis or adsorption host‐guest chemistry in terms of efficient mass transport of guest molecules.     

The hydrolysis of pyridilmonoimines in acidic aqueous media

The rates of hydrolysis of some pyridilmonoimines have been investigated in aqueous methanol medium of acetate buffer. The hydrolysis of the studied bases found to be slower than that of benzylideneaniline. It is evident from the dependent of the rate constants upon the buffer concentration that the rate equation has the form of special and general acid catalysis. From the results it is suggested that the rate-determining step appears to be the protonation of the nitrogen atom of the imino group of the monoamines at the employed pH.     

Poly(trialkylsilyl methacrylate)s: A family of hydrolysable polymers with tuneable erosion profiles

Polymers containing hydrolytically labile trialkylsilyl ester side groups were synthesised via a conventional and a controlled radical polymerization. The trialkylsilyl methacrylate monomer unit was chosen for its capacity to hydrolyse into basic, acid or sea water varying the hydrophilic character of the resulting polymer backbone with time. The hydrolysis or saponification reaction of the ester bond of the trialkylsilyl methacrylate was monitored through a ¹H NMR study showing the formation of siloxane side-products. Several copolymers and polymer blends were prepared as matrixes for controlled erodible systems. Their capacity to hydrolyse was demonstrated through SEM investigations with selective dissolution of free films containing hydrolysable copolymers and PMMA blends. Well-defined random and diblock copolymers with methyl methacrylate were investigated to show the effect of the microstructure on the erosion properties of the corresponding coatings. Poly(methyl methacrylate-b-tert-butyldimethylsilyl methacrylate) diblock copolymers synthesised through the RAFT process showed a better control of the erosion with a constant erosion rate over a long-time service in sea water at pH = 8.2. In addition, experiments showed that the erosion rate could be modulated by varying the molar proportion of hydrolysable side groups onto the copolymer backbone and the weight amount of copolymers mixed with PMMA in toluene solution.     

Poly(4-vinylpyridine) catalyzed hydrolysis of methyl bromide to methanol and dimethyl ether

The hydrolysis of methyl bromide with neutral water is performed in the presence and absence of various amines in a batch reactor at different temperatures (50–125 °C). Screening of poly(4-vinylpyridine) as a potential reusable solid amine catalyst showed maximum efficiency. This significant enhancement in efficiency is due to the capture of HBr by solid PVP and remains phase-separated driving the reaction forward. The major advantage of this process is that the polymer can be easily regenerated and reused without loss of activity making it a very effective catalyst for the conversion of methyl halides to methanol and dimethyl ether.     

New phosphoroamidate compounds: Synthesis,structural characterization and studies on ZnCl2 assisted hydrolysis of the P–N bond

A variety of phosphorodiamidate compounds were synthesized from the corresponding phosphorodichloridate intermediates and phosphorus oxychloride. These were completely characterized using different spectroscopic methods and single crystal X-ray diffraction studies on one of them. Studies revealed that water in the presence of a mild Lewis acid like ZnCl₂ was found to assist the hydrolysis of the P–N linkage. The proof of this concept was effectively realized through the hydrolysis of hexamethylphosphoramide.