A theoretical study of the interactions between N, N-dimethylformamide and aromatic hydrocarbons

The B3LYP and MP2 methods with 6-31G* basis set were used to predict the geometries of N, N-dimethylformamide (DMF) dimer and DMF–aromatic hydrocarbons interaction systems. A total of 10 conformers were obtained with no imaginary frequencies, respectively. The interaction energies of these binary mixtures have been obtained. The analyses of chelpg charge distribution and the atoms in molecules theory (AIM) were used to analyze the nature of the interaction. The results show the presence of hydrogen bonds between DMF and aromatic hydrocarbons. The interaction between DMF and benzonitrile is the strongest with the interaction energy of −21.58 kJ mol⁻¹ (BSSE corrected), and the intensity order of interactions is DMF–benzonitrile: d2 > DMF–DMF: a2 > DMF–toluene: c1 > DMF–benzene: b2.     

Mutual Solubilities of Water and Alkanes

Summary.  The evaluation of mutual solubility data for systems water with n-alkanes, isoalkanes, and cycloalkanes along the three phase line is reported and a formula for the prediction of solubility of alkanes in water is developed. Then a cubic equation of state with an added term, which accounts for hydrogen bonding is used for correlation of liquid–liquid equilibrium data and for prediction of solubility of water in hydrocarbons using alkane in water solubility data. Comparison of the predicted and experimental solubilities is performed using all accessible experimental data. With this approach it is possible to predict the solubilities of water in alkanes with good accuracy over the temperature range up to about 20 K below critical temperature. Solubility of alkanes in water can also be calculated using experimental data for solubility of water in alkanes but results of these calculations are more sensitive to experimental errors of the data. Corresponding author: E-mail: macz@ichf.edu.pl Received August 5, 2002; accepted (revised) September 13, 2002 Published online March 13, 2003 RID="a" ID="a" Dedicated to Prof. Dr. H. Gamsj?ger on the occasion of his 70^th birthday anniversary     

Concurrent adsorption and complex formation in reversed-phase liquid-liquid chromatography with tri-n-octylphosphine oxide

Summary Reversed-phase liquid-liquid chromatographic systems consisting of an aqueous mobile phase and an organic liquid stationary phase of the proton acceptor tri-n-octylphosphine oxide (TOPO) inn-decane, coated on LiChrosorb RP-8, have been studied. The solutes were hydrophilic aromatic carboxylic acids and phenol. The retention of the carboxylic acids shows a minimum at 10 mM of TOPO, whereas increasingly tailing peaks have been obtained with decreasing concentrations of TOPO. This behaviour is due to a concurrent complex formation by hydrogen bonding with TOPO in the liquid stationary phase and adsorption at the interface between the support and the liquid stationary phase. The adsorption of TOPO, ketones and aromatic acids from hexane on Li-Chrosorb RP-8 has been studied, and seems to be due to residual silanol groups. The adsorption isotherm of TOPO has been determined and can be described by a two-site Langmuir adsorption model. Non polar solutes are not adsorbed. The influence of TOPO on the retention and the peak symmetry of carboxylic acids in the liquid-liquid chromatographic system appears to be due to a competition between TOPO and the acids for the same adsorption sites. No competition was found for phenol.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Second Dissociation Constant of H<Subscript>2</Subscript>Te and the Absorption Spectra of HTe<Superscript>–</Superscript>, Te<Superscript>2–</Superscript> and Te<Subscript>2</Subscript><Superscript>2–</Superscript> in Aqueous Solution

We have measured the second acid dissociation constant, K _2a , at several ionic strengths for hydrogen telluride (H₂Te) using the Charge Transfer to Solvent (CTTS) uv spectra of its anions HTe⁻ and Te²⁻. Since it is produced in our solutions, we have also determined the spectra of Te₂ ²⁻ both in the uv and in the visible regions. At 25 ^∘C, K _2a = (1.28 ± 0.02) × 10⁻¹² by extrapolation to zero ionic strength. Its value at an ionic strength equal to 0.5 mol.dm^-3 was estimated to be (8.7 ± 0.2) × 10⁻¹². The solution thermodynamics of these species are also discussed and comparisons are made to related acids.     

Matrix isolation infrared studies of complexes formed between substituted phenols and trimethylamine

Infrared spectroscopy and matrix isolation technique have been used to study the 1 : 1 complexes formed between 2,4,5-trichlorophenol (TCP), pentachlorophenol (PCP) or 2-chloro-4,6-dinitrophenol (CNP) and trimethylamine (TMA) isolated in solid argon. The results were analyzed in relation to the type of complex formed. Depending on the proton-donor ability of the phenol three different types of hydrogen bonded complexes have been identified in argon matrices. The weakest phenol in the series, TCP (pK_a = 6.72), forms a strong molecular hydrogen bonded complex with TMA as indicated by the broad ν(OHN) absorption with a maximum at 2490 cm⁻¹ and a band at 811 cm⁻¹ due to the ν_s(C₃N) mode of the perturbed amine. The strongest phenol, CNP (pK_a = 2.01), interacts with TMA in an argon matrix to form ionic complex with the proton transferred to the base molecule. This is evidenced by the presence of the ν(NH⁺---O⁻) absorption between 3000−1800 cm⁻¹, by the ν_as(C₃N⁺) and ν_s(C₃N⁺) absorptions due to the protonated amine and by numerous product bands due to the relatively strongly perturbed modes of the phenol ring. The interaction between TMA and a phenol of intermediate strength, PCP (pK_a = 4.74), in solid argon probably leads to the formation of two types of hydrogen bonded complexes: an ionic complex with the proton transferred to the amine molecule and a pseudosymmetric one with the proton more or less equally shared between the phenol and amine molecules. In this case the protonic absorption consists of two broad features situated in the 3000–1600 cm⁻¹ and 950–400 cm⁻¹ regions due to the ν(NH⁺O⁻) and ν(OHN) modes, respectively.     

Highly sensitive catalytic determination of molybdenum

A novel, highly sensitive, selective, and simple kinetic method was developed for the determination of Mo(VI) based on its catalytic effect on the oxidation of 1-amino-2-naphthol-4-sulfonic acid (ANSA) with H₂O₂. The reaction was followed spectrophotometrically by tracing the oxidized product at 465 nm after 30 min of mixing the reagents. The optimum reaction conditions were: 10 mmol l⁻¹ ANSA, 50 mmol l⁻¹ H₂O₂, 100 mmol l⁻¹ acetate buffer of pH 5.0 ± 0.05 and at 40 °C. Addition of 200 μg ml⁻¹ diethylenetriaminepentaacetic acid (DTPA) conferred high selectivity for the proposed method. Following the recommended procedure, Mo(VI) could be determined with a linear calibration graph up to 2.5 ng ml⁻¹ and a detection limit, based on the 3S_b-criterion, of 0.027 ng ml⁻¹. The unique sensitivity and selectivity of the implemented method allowed its direct application to the determination of Mo(VI) in natural and industrial waste water. The method was validated by comparison with the standard ETAAS method. Moreover, published catalytic-spectrophotometric methods for the determination of molybdenum were reviewed.     

Developments on carbon dioxide reduction: Their promise,achievements, and challenges

CO₂ reduction processes continue to be developed for electrosynthesis, energy storage applications, and environmental remediation. A number of promising materials have shown high activity and selectivity to target reduction products. However, the progress has been mainly at a small laboratory scale, and the technical challenges of large scale CO₂ reduction have not been considered adequately. This review covers recent advancements in catalyst materials and cell designs. The leading materials for CO₂ reduction to a number of useful products are presented with their corresponding cell and reactor designs. The latest efforts to progress to industrially relevant scales are discussed, along with the challenges that must be met for carbon dioxide reduction to be a viable route for mass scale production.     

Untersuchungen an Hydriden im Bereich der Phase Ti2CO1—x Fe x (x=0–0,5)

The hydrogen absorption of the phase Ti₆₄Co_32–x Fe _x (x=0...16) and its influence on the magnetic properties have been investigated. Measurements of the vapour-pressure, wide-line NMR and magnetic susceptibility have been performed. Substitution of Co by Fe does not change the amount of absorbed hydrogen. However the reaction rate of hydriding process, the activation energy of diffusion and the magnetic quantities change upon this substitution.

     

Medium-size Gaussian basis sets for hydrogen through argon

Summary Medium-sized Gaussian basis sets are reoptimized for the ground states of the atoms from hydrogen through argon. The composition of these basis sets is (4s), (5s), and (6s) for H and He, (9s5p) and (12s7p) for the atoms Li to Ne, and (12s8p) and (12s9p) for the atoms Na to Ar. Basis sets for the² P states of Li and Na, and the³ P states of Be and Mg are also constructed since they are useful in molecular calculations. In all cases, our energies are lower than those obtained previously with Gaussian basis sets of the same size.     

Thermotropic Liquid Crystals Formed by Intermolecular Hydrogen Bonding Interactions

The role of hydrogen bonding in the formation or stabilization of liquid crystalline phases has only recently been appreciated. Following the first, wellestablished examples of liquid crystal formation from the dimerization of aromatic carboxylic acids, through hydrogen bonding, several classes of compounds have recently been synthesized, the liquid crystalline behavior of which is also dependent on intermolecular hydrogen bonds between similar or dissimilar molecules. In this review the main classes of compounds exhibiting liquid crystallinity due to hydrogen bonding are presented to show the diversity of organic compounds that can be used as building elements in liquid crystals. The molecules are either of the rigid-rod anisotropic or amphiphilic types such as molecules appropriately functionalized with pyridyl and carboxyl groups, whose interaction leads to the formation of liquid crystals; amphiphilic carbohydrates and amphiphilic and bolaamphiphilic compounds with multiple hydroxyl groups whose dimerization or association is indispensable for the formation of liquid crystals; and certain amphiphilic carboxylic acids with monomeric or polymeric mesogens and amphiphilic-type compounds bearing different moieties, whose interaction may lead to the formation of mesomorphic compounds. Associated with the macroscopic display of liquid crystalline phases is the supramolecular structure, and therefore rather extended discussion of these structures are included in this review.