Preparation and Characterization of Trimethylsilylpyridylacetylene Bridged,Dicobalt Carbonyl Complexes Containing Bis(diphenylphosphino)methylene or Bis(diphenylphosphino)ethylene Ligand

Reaction of an alkyne‐bridged dicobalt complex, [Co₂(CO)₆(μ‐Me₃SiC=Cpy)] 4 , with bis(diphenylphosphino)methylene (DPPM) or bis(diphenylphosphino)ethylene (DPPE) in THF at 55 °C yielded a DPPM or DPPE doubly bridged dicobalt compound, [{μ‐P,P‐PPh₂CH₂PPh₂}Co₂(CO)₄(μ‐Me₃SiC=Cpy)] 5 or [{μ‐P,P‐PPh₂CH₂CH₂PPh₂}Co₂(CO)₄(μ‐Me₃SiC≡Cpy)] 6 . Compound 5 and 6 were characterized by spectroscopic means as well as X‐ray crystal structure determination.     

The structure and electrochemical characteristics of La0.67Mg0.33 (Ni0.8Co0.1Mn0.1) x (x=2.5–5.0) multiphase alloys for nickel-metal hydride batteries

This paper presents results concerning structure and electrochemical characteristics of the La_0.67Mg_0.33 (Ni_0.8Co_0.1Mn_0.1) _x (x=2.5–5.0) alloy. It can be found from the result of the Rietveld analyses that the structures of the alloys change obviously with increasing x from 2.5 to 5.0. The main phase of the alloys with x=2.5–3.5 is LaMg₂Ni₉ phase with a PuNi₃-type rhombohedral structure, but the main phase of the alloys with x=4.0–5.0 is LaNi₅phase with a CaCu₅-type hexagonal structure. Furthermore, the phase ratio, lattice parameter and cell volume of the LaMg₂Ni₉phase and the LaNi₅ phase change with increasing x. The electrochemical studies show that the maximum discharge capacity increases from 214.7 mAh/g (x=2.5) to 391.1 mAh/g (x=3.5) and then decreases to 238.5 mAh/g (x=5.0). As the discharge current density is 1,200 mA/g, the high rate dischargeability (HRD) increases from 51.1% (x=2.5) to 83.7% (x=3.5) and then decreases to 71.6% (x=5.0). Moreover, the exchange current density (I ₀) of the alloy electrodes first increases and then decrease with increasing x from 2.5 to 5.0, which is consistent with the variation of the HRD. The cell volume reduces with increasing x in the alloys, which is detrimental to hydrogen diffusion and accordingly decreases the low-temperature dischargeability of the alloy electrodes.     

The structural phase transitions of aminoguanidinium(1+) dihydrogen phosphate—study of crystal structures, vibrational spectra and thermal behavior

Aminoguanidinium(1+) dihydrogen phosphate was prepared by crystallization from aqueous solution. On the basis of the results of DSC measurements, X-ray structural analysis was carried out at temperatures of 160, 215 and 293 K for three aminoguanidinium(1+) dihydrogen phosphate phases ( |Z=2|non-ferroic |melting point 408 K; II |201-222 K|(2) |Z=2|non-ferroic|-; III |<201 K|(2)|Z=4|non-ferroic|-). The triclinic unit cell dimensions (a=6.8220(2), b=7.1000(2), c=7.4500(2) Å, α=86.925(2)°, β=80.731(2)°, γ=79.630(2)°, V=350.21(2) Å³—phase I) are similar for all three structural phases with the exception of phase III, where doubling of the c-axis length leads to an increase in the volume to 692.34(3) Å³. The crystal structure of all three modifications consists of parallel layers of dihydrogen phosphate anions that are interconnected by aminoguanidinium(1+) cations through hydrogen bonds of the N-H…O type. The planar aminoguanidinium(1+) cations are oriented almost parallel to each other and are perpendicular to the anion layers. The primary differences amongst phases I, II and III lie in the location of the H atom in the short O-H…O bonds connecting the dihydrogen phosphate anions in layers. The FTIR and FT Raman spectra of natural and deuterated compounds were recorded and interpreted. The FTIR spectra were studied down to a temperature of 90 K.     

Spectroscopic study of hydrogen exchange processes and structure of intermediate complexes with intermolecular hydrogen bonds

The kinetics of hydrogen exchange in molecular systems with H-bonds has been studied by means of kinetic IR spectroscopy and low-temperature NMR spectroscopy. The experimental values of the rate constants and activation energies for molecules capable of forming H-bonds as both proton donors and proton acceptor are collected and analyzed from the point of view of the influence of H-bond formation ability of the molecules-partners. The evidence available testifies to a molecular mechanism of the H-exchange reactions in inert solvents and in the gas phase via the formation of cyclic bimolecular intermediates. The different mechanisms and the structure of intermediate complex of molecular H-exchange process in inert media are discussed and the possible paths of experimental elucidation of reaction mechanism are offered.     

Paradigms and paradoxes: patterns and estimation of the entropy of formation of aqueous hydrogen containing mono and polynuclear oxyanions

“Simple” energetic patterns, where simple means the use of parameters derived only from the stoichiometry of these species, are relatively rarely discussed in the literature. In addition, entropy studies have been dominated by derivation of the absolute quantity S° rather than the entropy of formation (TΔ_f S ^o). Relationships between the entropy of formation and different parameters such as negative value of the charge of the species, the number of oxygen atoms, the natural logarithm of the molecular weight, the total number of atoms and the number of central atoms that are gases were recently discussed by us for aqueous polynuclear oxyanions. As shown here hydrogen containing anions do not follow this pattern. In this study, new approaches for the estimation of the entropy of formation of aqueous hydrogen containing mono and polynuclear oxyanions are suggested, evaluated and recommended.     

Investigation of hydrogen embrittlement of Sn–Al alloy during contact with water vapour

The humid air induced processes of embrittlement of the Sn–Al alloy and hydrogen emission have been investigated. Using the secondary-ion mass spectrometry, X-ray, scanning electron microscopy and energy-dispersive X-ray spectrometry techniques it was found that the brittleness is caused by a failure of phase adhesion due to accumulation of hydrogen and formation of oxidized layers on phase boundaries during contact of the alloy with water vapour. Specific physical and electrochemical properties of the Sn/Al phase boundary satisfy conditions for the formation of atomic hydrogen and its reaction with Sn. Electrochemical corrosion plays an important role at the stage of formation of atomic hydrogen. The penetration of hydrogen and its accumulation in the bulk of the alloy is due to the high energy of the phase boundary and the low energy of formation of unstable tin hydride. Electronic Publication     

Ultrafine molybdenum carbide nanoparticles supported on nitrogen doped carbon nanosheets for hydrogen evolution reaction

Nitrogen doped carbon nanosheets supported molybdenum carbides nanoparticles (Mo_xC/NCS) have been synthesized by tuning the mass ratio of melamine and ammonia molybdate. The Mo₂C/NCS-10 exhibits superior electrocatalytic performance and stability for HER, which was attributed to N-doped carbon nanosheets, small particle size, mesoporous structure, and large electrochemical active surface area.     

Enhancing effect of DNA on chemiluminescence from the decomposition of hydrogen peroxide catalyzed by copper(II)

In the absence of any special luminescence reagent, emission of weak chemiluminescence has been observed during the decomposition of hydrogen peroxide catalyzed by copper(II) in basic aqueous solution. The intensity of the chemiluminescence was greatly enhanced by addition of DNA and was strongly dependent on DNA concentration. Based on these phenomena, a flow-injection chemiluminescence method was established for determination of DNA. The chemiluminescence intensity was linear with DNA concentration in the range 2×10^–7–1×10^–5 g L^–1 and the detection limit was 4.1×10^–8 g L^–1 (S/N=3). The relative standard deviation was less than 3.0% for 4×10^–7 g L^–1 DNA (n=11). The proposed method was satisfactorily applied for determination of DNA in synthetic samples. The possible mechanism of the CL reaction is discussed.     

Infrared and ab initio studies of hydrogen bonding and proton transfer in the complexes formed by pyrazoles

The results of experimental studies and quantum mechanical calculations of vibrational spectra and structure of hydrogen bonded complexes formed by pyrazole (P) and 3,5-dimethylpyrazole (DMP) are presented. IR spectra of pyrazoles in solutions, gas phase, and solid state have been investigated in wide range of concentrations and temperatures. It has been found that in the gas phase both P and DMP reveal the equilibrium between monomers, dimers, and trimers. In solutions the equilibrium between monomers and trimers dominates, no bands, which can be attributed to dimers were detected. DMP retains the trimer structure in solid state, while in the case of pyrazole P, formation of the crystal provides another type of association. Geometrical and spectral characteristics of dimers and trimers, obtained by ab initio calculations, are presented and compared with experimental data.

IR spectra of solutions containing P and DMP with a number of acids (acetic and trifluoroacetic acids, pentachlorophenol, HBr) have been studied in parallel with ab initio calculations. It has been found that pentachlorophenol forms with pyrazoles complexes with one strong hydrogen bond O–HN, while NH pyrazole group remains unbonded. With carboxylic acids DMP forms 1:1 cyclic complexes with two hydrogen bonds. In the case of acetic acid, the complex in CH₂Cl₂ solution reveals molecular structure with OHN and C=OHN bonds, in accordance with results of the calculations. For trifluoroacetic acid, the calculations predict the molecular structure to be energetically more stable in the case of the isolated binary complex (in gas phase), while the experimental spectrum of CH₂Cl₂ solution gives an evidence of the proton transfer with formation of the cyclic ionic pair with two NH⁺O⁻ bonds. The agreement with experimental results can be improved by taking into account the influence of environment in the framework of Onsager or Tomasi models. The shape of proton potential function of the complexes and medium effect on its parameters, resulted from experimental data and calculations, are discussed. It has been found that the number of potential minima and their relative depth depend strongly on the method of calculations and the basic set. Under excess of trifluoroacetic acid, the formation of 2:1 acid–DMP complex has been detected. Spectral characteristics and results of calculations point to the cyclic structure of this complex, which includes homoconjugated bis-trifluoroacetate anion and DMPH⁺ cation. With HBr both studied pyrazoles were found to form ionic complexes including one or two pyrazole molecules per one acid molecule and correspondingly monocation or homoconjugated cation BHB⁺.     

Kinetics of the Reaction of Abstracting Hydrogen from Ethylene by Hydrogen Atom

Hydrogen abstraction reaction, H C2H4 --H2 C2H2 was studied by using A initio SCF method. Ge-ometries were fully optimized at SCF level and energies were computed at STO-3G basis set for reactants and transition state. Vibrational analysis was performed thereupon. Finally, the rate constant calculations were carried out at different temperatures for all range of reaction temperature according to Eyring's sbwlute reaction rate theory. The calculated activation energy is 12. 68 kcal/mol, lower than observed value (H. S kcal/mol) by 1. 82 kcal/mol only. The agreement of the calculated rate constants with the experiments is satisfactory.