SYNTHESIS OF A NOVEL POLYSACCHARIDE HYDROGEL

ABSTRACT

A modified hyaluronic acid (HA) biopolymer was synthesized that can be photocrosslinked to form a stable hydrogel. The chemical and physical properties including the amount of modification of the polymer with methacrylate anhydride, the viscosity of the modified biopolymer, and the solute diffusion characteristics of the polymer have been determined.     

pH-Responsive Phase Transition of Supramolecular Hydrogel Consisting of Glycosylated Amino Acetate and Carboxylic Acid Derivative

By addition of a carboxylated amino acetate (2) to a low-molecular-weight hydrogel (1) which has a unique thermally induced volume-phase transition character, a macroscopic pH-responsive feature is newly conferred on the supramolecular hydrogel. The direct observation of temperature-dependent behavior of the mixed hydrogel clearly showed that the thermally induced swelling-shrinkage type of the volume phase transition at pH 4 is shifted to the gel–sol transition at pH 7 by 10?mol% addition of 2 to the hydrogel 1. On the basis of the measurements by TEM, SEM, XRD and FT-IR, it is conceivable that incorporation of the anionic carboxylate of 2 slightly disturbs the packing of the hydrogen bond belt of the mixed hydrogel. Such a slight disturbance greatly leads to the sol–gel transition by elevating temperature, instead of the volume-phase transition. Introduction of dynamic characteristics to supramolecular systems in a macroscopic level may extend the potential of these materials in various fields.     

Au@ZrO2空心纳米微球的制备及其催化性质

以Stober法合成了不同粒径的SiO₂微球。以这些SiO₂微球为硬模板,通过ZrOCl₂前驱体吸附和水解制备得到了ZrO₂@SiO₂复合物,然后用HF溶解去除二氧化硅模板剂,制备得到ZrO₂空心球。以ZrO₂空心球为载体,采用沉积-沉淀法（DP）合成了Au@ZrO₂纳米空心微球。考察了Au@ZrO₂纳米空心微球在对硝基苯胺还原反应中的催化性能。研究结果表明,所合成的SiO₂微球粒径大小均一、形状规则、分散性好;ZrO₂空心微球大小及比表面积可以通过硬模板SiO₂微球粒径进行有效控制;与Au@ZrO₂实心微球相比,Au@ZrO₂空心微球在对硝基苯胺还原反应中表现出良好的催化性能,当反应温度为45℃、反应7 min时,对硝基苯胺能够完全转化为对苯二胺。     

Facile Assembly of Graphene on Anion Exchange Resin Microspheres for Electrochemical Sensing and Biosensing

Graphene sheets were assembled on anion exchange resin (AER) microspheres based on the electrostatic interactions between graphene oxide and AER and subsequent chemical reduction. The prepared graphene‐coated AER microspheres were characterized by scanning electron microscopy, X‐ray diffraction, and Fourier transform infrared spectroscopy. They were then embedded in the bores of pipette tips to fabricate disposable electrodes for electrochemical sensing. The workability and performance of the novel electrodes were examined by analyzing the electrochemical behavior of the electrodes for the sensing of ascorbic acid, dopamine, uric acid, acetaminophen, aniline, and glucose by cyclic voltammetry and amperometry. The advantages of the electrodes include ease of fabrication, low cost, pronounced electrocatalytic activity, and rapid response. Thus, they hold great promise for a wide range of applications.     

Collagen-like peptides and peptide–polymer conjugates in the design of assembled materials

Collagen is the most abundant protein in mammals, and there has been long-standing interest in understanding and controlling collagen assembly in the design of new materials. Collagen-like peptides (CLPs), also known as collagen-mimetic peptides (CMPs) or collagen-related peptides (CRPs), have thus been widely used to elucidate collagen triple helix structure as well as to produce higher-order structures that mimic natural collagen fibers. This mini-review provides an overview of recent progress on these topics, in three broad topical areas. The first focuses on reported developments in deciphering the chemical basis for collagen triple helix stabilization, which we review not with the intent of describing the basic structure and biological function of collagen, but to summarize different pathways for designing collagen-like peptides with high thermostability. Various approaches for producing higher-order structures via CLP self-assembly, via various types of intermolecular interaction, are then discussed. Finally, recent developments in a new area, the production of polymer–CLP bioconjugates, are summarized. Biological applications of collagen contained hydrogels are also included in this section. The topics may serve as a guide for the design of collagen-like peptides and their bioconjugates for targeted application in the biomedical arena.     

Green chemistry for the synthesis of methacrylate-based hydrogels crosslinked through Diels–Alder reaction

This study describes an environmentally friendly and green synthetic approach for the preparation of poly(aminoethylmethacrylate)-based hydrogels crosslinked through Diels–Alder (DA) reaction in water. This “click” reaction offers the possibility of preparing chemically crosslinked hydrogels in the absence of any catalyst, initiator or coupling agent, thus preserving the biocompatibility of the material. The suitable furan diene was obtained by modifying a methacrylate polymer by its reaction with furfural, a first generation compound derived from renewable resources. Methacrylate-based complementary polymeric dienophiles were also prepared by introducing maleimide groups into the structure. The products obtained at different steps were characterized by FTIR, NMR and TGA techniques. The study of the rheological properties of the hydrogels proved the success of this green “click” synthetic strategy confirming the formation of chemically crosslinked networks by the use of the Diels–Alder reaction. Furthermore, SEM studies revealed promising morphological properties of the ensuing hydrogels in terms of biomedical applications.     

有序排列PMMA 模板法合成三维有序纳米孔道MgO

"利用由无乳化剂的乳液聚合法和水浮法联用技术合成得到的有序排列的聚甲基丙烯酸甲酯(PMMA)微球为硬模板,以硝酸镁为镁源,并采用硝酸镁-柠檬酸-乙醇混合溶液浸渍PMMA微球后经干燥以及先后在300 ℃恒温灼烧3 h和500 ℃恒温灼烧5 h,制备出具有有序纳米孔道结构的MgO粒子．应用X射线衍射、高分辨扫描电子显微镜、透射电子显微镜/选区电子衍射以及N2吸附-脱附法等技术表征了PMMA和MgO样品的物理化学性质．结果表明,所得PMMA微球颗粒较为均匀,粒径约为284 nm,且排列规整有序．由PMMA硬模板     

Progress on intelligent hydrogels based on RAFT polymerization: Design strategy,fabrication and the applications for controlled drug delivery

Although intelligent hydrogels have shown bright potential application in biomedical fields,they were prepared by conventional methods and still face many serious challenges,such as uncontrollable stimulus-response and low response sensitivity.Recently,RAFT polymerization provides a versatile strategy for the fabrication of intelligent hydrogels with improved stimulus-response properties,owing to the ability to efficiently construct hydrogel precursors with well-defined structure,such as block copolymer,graft copolymer,star copolymer.In this review,we summarized the recent progress on intelligent hydrogels based on RAFT polymerization with emphasis on their fabrication strategies and applications for controlled drug delivery.     

Imitation of drug metabolism in cell co-culture microcapsule model using a microfluidic chip platform coupled to mass spectrometry

In this work,a multi-functional analysis platform by coupling a microfluidic chip to a mass spectrometry(MS) detector was described.We constructed a three-dimensional tumor-endothelial co-culture model for simulating drug resistance during tumor treatment.On this specially designed integrated platform,the first step was to prepare heterogeneous cell-encapsulated alginate microcapsules for threedimensional co-culture,and the second step was to achieve on-line perfusion culture and continuous drug stimulation on chip.It facilitates cell proliferation analysis and the collection of metabolism medium.After micro solid phase extraction column(SPE) pretreatment,subsequent mass spectrometry could detect drug metabolism.The high activity of two kinds of cells(A549 and HUVEC) shows the biocompatibility of the platform.Paclitaxel was used as a model drug,the distinctions of drug absorption between the mono-culture group and co-culture group were clearly observed by electrospray ionization quadrupole time-of-flight mass spectrometry(ESI-Q-TOF MS).Therefore,the integrated platform has shown promise as a high throughput,low cost for cell metabolism research and drug screening processes.     

Comparison of Two Rhodamine-Polyamine Polystyrene Solid-phase Fluorescence Sensors for Hg(II) Detection Based on Theoretical Calculation

Two novel rhodamine-based polystyrene solid-phase fluorescence sensors PS-PA-I and PS-PA-II with different lengths of polyamines were synthesized for Hg(II) determination. The detection mechanism involving the Hg(II) chelation-induced spirocycle open of rhodamine was proposed with the aid of theoretical calculation. The stronger N-Hg bond and the longer polyamine chain in PS-PA-II led to a better selectivity, much higher and more quickly fluorescence response to Hg(II).