层状多硫代锑(Ⅲ)酸镉(Ⅱ)化合物(1,4-DABH2)Cd2Sb2S6的溶剂热合成与表征

利用溶剂热方法合成了层状多硫代锑髥酸镉髤化合物(1,4-DABH2)Cd2Sb2S6(1)(1,4-DAB=1,4-丁二胺),并通过红外光谱、热重分析对其进行了表征,用X-射线衍射测定了化合物的单晶结构。单晶解析表明,化合物属正交晶系,Cmca空间群,Mr=750.77,a=0.860 3(5)nm,b=0.898 7(6)nm,c=2.273(2)nm,V=1.758(2)nm3,Z=4,λ=0.071 073 nm,R=0.032,wR=0.106 7。晶体结构中含有六元环的Cd2SbS3和八元环的Cd2Sb2S4的阴离子网络层状[CdSbS3]nn-,双质子化的有机阳离子在阴离子层之间以氢键N-H…S形式连接。另外紫外-可见漫反射光谱研究表明,化合物为半导体。     

溶剂热法制备立方状ITO粉体及其电性能

以乙二醇、乙醇为溶剂通过溶剂热法制备出立方状ITO纳米粉体,研究了反应时间、NaOH浓度对ITO纳米粉体形貌的影响,并讨论了溶剂体积比、NaOH浓度对ITO粉体导电性的影响及机理。结果表明：采用乙二醇与乙醇做溶剂,V_EG：V_EtOH=4：1时,制备出分散性良好的立方状ITO纳米粉体,平均粒径为10.7 nm,且其XRD衍射峰强度比I₄₀₀/I₂₂₂最高为0.380;乙二醇与乙醇做溶剂,V_EG：V_EtOH=4：1,且NaOH浓度为0.275 mol·L^-1时,粉体电导率最高为46.75 mS·cm^-1。     

Engineering the Mesopores of Fe3O4@Mesosilica Core–Shell Nanospheres through a Solvothermal Post‐Treatment Method

A solvothermal post‐treatment method was developed to synthesize Fe₃O₄@mesosilica core–shell nanospheres (CSNs) with a well‐preserved morphology, mesoporous structure, and tunable large pore diameters (2.5–17.6 nm) for the first time. N,N‐Dimethylhexadecylamine (DMHA), which was generated in situ during the heat‐treatment process, was mainly responsible for this pore‐size enlargement, as characterized by NMR spectroscopy. This pore‐size expansion can be strengthened with the aid of hexamethyldisilazane (HMDS), whilst the nature of the surface of the Fe₃O₄@mesosilica CSNs can be easily modified with trimethylsilyl groups during the pore‐size‐expansion process. The hydrophobicity of the Fe₃O₄@mesosilica CSNs increased for the enlarged mesopores and the adsorption capacity of these CSNs for benzene (up to 1.5 g g^?1) is the highest ever reported for Fe₃O₄@mesosilica CSNs. The resultant Fe₃O₄@mesosilica CSNs (pore size: 10 nm) showed a 3.6‐times higher adsorption capacity of lysozyme than those without the pore expansion (pore size: 2.5 nm), thus making them a good candidate for loading large molecules.     

Hierarchical Fe3O4@TiO2 Yolk–Shell Microspheres with Enhanced Microwave‐Absorption Properties

A facile and efficient strategy for the synthesis of hierarchical yolk–shell microspheres with magnetic Fe₃O₄ cores and dielectric TiO₂ shells has been developed. Various Fe₃O₄@TiO₂ yolk–shell microspheres with different core sizes, interstitial void volumes, and shell thicknesses have been successfully synthesized by controlling the synthetic parameters. Moreover, the microwave absorption properties of these yolk–shell microspheres, such as the complex permittivity and permeability, were investigated. The electromagnetic data demonstrate that the as‐synthesized Fe₃O₄@TiO₂ yolk–shell microspheres exhibit significantly enhanced microwave absorption properties compared with pure Fe₃O₄ and our previously reported Fe₃O₄@TiO₂ core–shell microspheres, which may result from the unique yolk–shell structure with a large surface area and high porosity, as well as synergistic effects between the functional Fe₃O₄ cores and TiO₂ shells.     

两个4-[(8-羟基-5-喹啉)偶氮]苯磺酸配合物的合成、结构及性质研究

以4-[(8-羟基-5-喹啉)偶氮]苯磺酸(H₂L)为配体,采用溶剂热合成法合成了两个配合物[CuL(en)]·0.5H₂O (1)和[CuL₂][Cu(en)₂]·2H₂O (2)(en=乙二胺),并采用单晶X-射线衍射、红外光谱、元素分析、X-射线粉末衍射和热重分析对其进行表征。化合物1和2通过氢键和π…π相互作用连接形成了三维超分子网格。此外,还研究了两个化合物的荧光性质。     

铂修饰的{001}面暴露的二氧化钛纳米片阵列的制备和光催化性能

采用有机溶剂热法在FTO衬底上制备{001}面暴露的单晶锐钛矿相TiO2纳米片阵列,通过FESEM和XRD研究样品的形貌和晶体结构. 与水热法制备的纳米片阵列相比,有机溶剂热法制备的样品取向性更好. 采用光沉积方法在纳米片阵列上沉积Pt,所得到的Pt纳米颗粒粒径更为均匀,并且更容易沉积在{001}面上. 所负载的Pt 纳米颗粒增强了TiO2纳米片的光吸收性能,同时大大减弱了光致发光强度. 在光催化性能测试中,具有最优负载量的样品催化性能提高了一倍. 与传统的Pt负载相比,{001}面的最优负载量显得相当小,这可能源于高活性{001}面的原子结构.     

Solvothermal Synthesis of Multiple Dihydropyrimidinones at a Time as Inhibitors of Eg5

Solvothermal synthesis of multiple dihydropyrimidinones at a time has been developed in inexpensive and green bio-based solvent lactic acid without any additional catalysts or additives. By this method, thirty new dihydropyrimidinone derivatives were synthesized in two batches and characterized. All of the compounds were screened by Eg5 motor protein ATPase assay, and the positive compounds were tested against the Caco-2 cell line, HeLa cell line, L929 cell line and T24 cell line in vitro. Among them, compound C9 exhibited the best inhibitory activity against motor protein ATPase with an IC₅₀ value of 30.25 μM and significant cytotoxic activity in the micromolar range against the cells above. The Lineweaver–Burk plot revealed that compound C9 was a mixed-type Eg5 inhibitor. A molecular modeling study using the Discovery Studio program was performed, where compound C9 exhibited good binding interaction with Eg5 motor protein ATPase, and this was consistent with the attained experimental results.     

Co3O4−CeO2 Nanocomposites for Low-Temperature CO Oxidation

In an effort to combine the favorable catalytic properties of Co₃O₄ and CeO₂, nanocomposites with different phase distribution and Co₃O₄ loading were prepared and employed for CO oxidation. Synthesizing Co₃O₄-modified CeO₂ via three different sol-gel based routes, each with 10.4 wt % Co₃O₄ loading, yielded three different nanocomposite morphologies: CeO₂-supported Co₃O₄ layers, intermixed oxides, and homogeneously dispersed Co. The reactivity of the resulting surface oxygen species towards CO were examined by temperature programmed reduction (CO-TPR) and flow reactor kinetic tests. The first morphology exhibited the best performance due to its active Co₃O₄ surface layer, reducing the light-off temperature of CeO₂ by about 200 °C. In contrast, intermixed oxides and Co-doped CeO₂ suffered from lower dispersion and organic residues, respectively. The performance of Co₃O₄-CeO₂ nanocomposites was optimized by varying the Co₃O₄ loading, characterized by X-ray diffraction (XRD) and N₂ sorption (BET). The 16–65 wt % Co₃O₄−CeO₂ catalysts approached the conversion of 1 wt % Pt/CeO₂, rendering them interesting candidates for low-temperature CO oxidation.     

A Strategy for the Preparation of Thioantimonates Based on the Concept of Weak Acids and Corresponding Strong Bases

By following a new synthetic approach, which is based on the in situ formation of a basic medium by the reaction between the strong base Sb(V)S₄^3? and the weak acid H₂O, it was possible to prepare three layered thioantimonate(III) compounds of composition [TM(2,2′‐bipyridine)₃][Sb₆S₁₀] (TM=Ni, Fe) and [Ni(4,4′‐dimethyl‐2,2′‐bipyridine)₃][Sb₆S₁₀] under hydrothermal conditions featuring two different thioantimonate(III) network topologies. The antimony source, Na₃SbS₄ ? 9 H₂O, undergoes several decomposition reactions and produces the Sb^IIIS₃ species, which condenses to generate the layered anion. The application of transition‐metal complexes avoids crystallization of dense phases. The reactions are very fast compared to conventional hydrothermal/solvothermal syntheses and are much less sensitive to changes of the reaction parameters.     

AgI Microplate Monocrystals with Polar {0001} Facets: Spontaneous Photocarrier Separation and Enhanced Photocatalytic Activity

Elucidating the facet‐dependent photocatalytic activity of semiconductor photocatalysts is important in improving the overall efficiency of photocatalysis. Furthermore, combining facet control with selective deposition of oxidation and/or reduction cocatalysts on specific faces of semiconductor photocatalysts is potentially an effective strategy to synergistically optimize the functionality of photocatalysts. In the present study, high‐purity wurtzite‐type β‐AgI platelet microcrystals with polar {0001} facets were prepared by a facile polyvinylpyrrolidone‐assisted precipitation reaction. The polar‐faceted AgI microplates were used as archetypes to demonstrate preferential diametric migration (i.e., effective separation) of photogenerated electrons and holes along the c axis. Such vectorial electron–hole separation stems from the asymmetric surface structures, which give rise to distinct photoexcited reaction behaviors on the ±(0001) polar facets of wurtzite‐type semiconductors. Furthermore, on selective deposition of Ag and MnO_x (1.5<x<2) cocatalysts on the reductive (0001) and oxidative (000$\bar 1$ ) facets, respectively, photocatalytic activity of the AgI microplates in degrading organic pollutants was dramatically enhanced thanks to the broad light‐absorption range, strong dye‐adsorption ability, and effective spatial separation of photocarriers.