Study of high-performance liquid chromatographic separation of selected herbicides by hydro-methanolic and micellar liquid chromatography using Genapol X-080 non-ionic surfactant as mobile phase constituent

Chromatographic behaviour of six selected herbicides (chlortoluron, metoxuron, chloridazon, simazine, propazine and atrazine) was studied by reversed-phase (RP) high-performance liquid chromatography (HPLC) containing Genapol X-080 non-ionic surfactant as methanol/water mobile phase constituent. The concentration of methanol was changed from 50 to 0% (v/v) for constant 2% (v/v) concentration of the surfactant. The surfactant concentration in purely aqueous micellar mobile phase varied from 1 to 5% (v/v) what is approximately 360-1800 times above the CMC. Within this concentration range Genapol X-080 proves concentration dependent selectivity changes for chlortoluron/atrazine critical pair not occurred in hydro-methanolic mobile phases. Further studies revealed that this chromatographic system offers high compatibility with cloud-point extraction environmental sample pretreatment approaches using Genapol X-080 for the purpose, too.     

Novel pyridinium salts as cationic thermal and photoinitiators and their photosensitization properties

Novel pyridinium salts [N‐(α‐phenylbenzyl)‐, N‐(1‐naphthylmethyl)‐, or N‐cinnamyl p‐ or o‐cyanopyridinium hexafluoroantimonates] were synthesized by the reaction of p‐ or o‐cyanopyridine and the corresponding bromides followed by anion exchange with KSbF₆. These pyridinium salts polymerized epoxy monomers at lower temperatures than previously reported for N‐benzyl‐2‐cyanopyridinium hexafluoroantimonate. The o‐substituted pyridinium salts showed higher activity than the p‐substituted ones, and the crosslinked epoxy polymers cured with these initiators showed higher glass‐transition temperatures. These pyridinium salts photoinitiated radical polymerization as well as cationic polymerization. The photopolymerization was accelerated by the addition of aromatic ketones as photosensitizers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1037–1046, 2002     

Influence of quaternary onium salts,crown ethers and cryptands on olefin epoxidations promoted by HOCl/ClO− in the Presence of Mn(III)-tetrakis(2,6-dichlorophenyl)porphyrin chloride

Reaction rates of alkene epoxidations, promoted by aqueous NaOCl and catalyzed by Mn(III)-tetrakis(2,6-dichlorophenyl)porphyrin chloride1 (P) in the presence of a lipophilic axial ligand (L) (e.g.N-hexylimidazole) and carried out under H₂O/CH₂Cl₂ two phase conditions at 0°C, are strongly enhanced by lowering the pH of the aqueous phase from 12.7 to 9.5. Under these conditions, a further relevant increase in the reaction rates can be achieved by adding phase-transfer catalysts (PT), e.g. quaternary ammonium salt 3, lipophilic crown ether4 or cryptand5, provided that the amount of L is very small (L/P=1 for very reactive alkenes, e.g. cyclooctene, and 10 for poorly reactive ones, e.g. 1-dodecene). In the case of cyclooctene epoxidation, the use of 0.006–0.03 mol. equiv. of PT completes the reaction in 1–10 min., the initial rates being up to 600 turnovers/min. with (2.2.2,C₁₀) cryptand. In the absence of the axial ligand, the quaternary ammonium salt3 and cryptand5 show an inhibitory effect. Such an effect is due to the formation of the poorly reactive Mn(P)CI species, by Cl– extraction to the organic phase. However, dibenzo crown ether 4 does not show this effect. In the presence of 4, and with L/P =1, the 1-dodecene epoxidation reaches 94% in 1 min. The unique behavior of crown ethers can be explained by their ineffectiveness in extracting alkali chlorides, providing a very low concentration of Cl– in the organic phase and thus avoiding the Mn(III)-porphyrin deactivation.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

Direct synthesis of 4,4-disubstituted N-silyl-1,4-dihydropyridines

An unprecedented method for the preparation of 4,4-disubstituted 1,4-dihydropyridines is presented. It is based on the trapping reaction of 4-substitued N-silylpyridinium ions. When performed with dialkylmagnesium reagents, such as iPr₂Mg, silyl protected 4,4-disubstituted 1,4-dihydropyridines were obtained in up to quantitative yields. High 1,4-selectivity was found for sterically demanding nucleophiles, whereas small nucleophiles (Me₂Mg) tend to yield 1,2-addition-products. Grignard, dialkylzinc and organocopper reagents were found to give either no addition products or less favorable results. Reduction of the obtained 1,4-dihydropyridine with NaCNBH₃ in the presence of HCl, followed by treatment with tert-butyl dicarbonate provided the corresponding N-Boc protected piperidines with high yields.     

Crystal Structures of the Potassium and Silver Salts of Nitroform

The solid state structures of three nitroformate (NF) salts were determined using single crystal X‐ray crystallography. The NF anion was found to be a non‐planar moiety which adopts either the commonly observed C_2v conformation or distorted propeller conformation (D₃) in the case of the silver salts, or, a C₂ conformation in the case of the potassium salt. This latter C₂ conformation has been uniquely observed for potassium nitroformate. All structures exhibit cation‐anion interactions that influence the structure of the anion. The ¹³C and ¹⁴N NMR spectra of the NF anion show broad singlets, which indicates the equivalence of the nitro groups in solution within the NMR time‐scale. In addition, the vibrational and mass spectra of potassium nitroformate and silver nitroformate monohydrate were recorded. Furthermore, the gaseous decomposition products of potassium nitroformate at 25 °C were detected using IR spectroscopy and mass spectrometry.     

Application of HPLC to measure vanadium in environmental,biological and clinical matrices

Vanadate and vanadium compounds exist in many environmental, biological and clinical matrices, and despite the need only limited progress has been made on the analysis of vanadium compounds. The vanadium coordination chemistry of different oxidation states is known, and the result of the characterization and speciation analysis depends on the subsequent chemistry and the methods of analysis. Many studies have used a range of methods for the characterization and determination of metal ions in a variety of materials. One successful technique is high performance liquid chromatography (HPLC) that has been used mainly for measuring total vanadium level and metal speciation. Some cases have been reported where complexes of different oxidation states of vanadium have been separated by HPLC. Specifically reversed phase (RP) HPLC has frequently been used for the measurement of vanadium. Other HPLC methods such as normal phase, anion-exchange, cation-exchange, size exclusion and other RP-HPLC modes such as, ion-pair and micellar have been used to separate selected vanadium compounds. We will present a review that summarizes and critically analyzes the reported methods for analysis of vanadium salts and vanadium compounds in different sample matrices. We will compare various HPLC methods and modes including sample preparation, chelating reagents, mobile phase and detection methods. The comparison will allow us to identify the best analytical HPLC method and mode for measuring vanadium levels and what information such methods provide with regard to speciation and quantitation of the vanadium compounds.     

Thermodynamics of ionic solid solutions: II. Discontinuous series: A new treatment of existing distribution data

A method of finding the activity coefficients of salts, anhydrous or hydrated, in binary solid solutions, described in an earlier paper as it applies to continuous series, has been applied to discontinuous series. The salts must differ with respect to only one ion. The method requires isothermal distribution data for equilibria between liquid (aqueous) and solid solutions in the ternary system consisting of the two salts and water. The following salt pairs were used for illustration: K(I/Br) at 0, 15, 25, 35, and 50°C., (NH₄/K)SCN at 0, 30, 60, and 90°C., (K/Tl)C10₃ at 10°C., and (NH₄/K)SO₃NH₂, (NH₄/K)Br, (Mg/Co)SO₄-7H₂O, and (Mn/Cu) SO₄.n H₂O-all at 25°C. Two kinds of behavior were noted and treated differently: systems in which the two series have the same, and those in which they have different crystal lattices. For two salts, A and B, which have the same lattice, and whose rational activity coefficients, f _A and f _B , can be described by 2-suffix Margules equations (regular solutions), lnf _A =B_sx _B ² and lnf _B =B_sx _A ² to be partially miscible, B_s>2, but this requirement does not apply if the lattices are different. In each series, distribution constants for the equilibria were also determined. Where possible, the calculated activities of the salts or the Gibbs excess energies of the solid solutions were compared with values reported by others who determined them by other methods. All the salt pairs studied show slight or strong positive deviations from ideality.     

New and novel organic-inorganic type crystalline ‘polypyrrolel/polyantimonic acid’ composite system: preparation, characterization and analytical applications as a cation-exchange material and Hg(II) ion-selective membrane electrode

A new phase of ‘organic-inorganic’ composite system, polypyrrole polyantimonic acid, prepared by mixing the inorganic precipitate of hydrated antimony oxide with organic conducting polymer i.e., polypyrrole, providing a novel granular form hybrid cation-exchanger suitable for column operation with better chemical and thermal stability, good ion-exchange capacity, reproducibility and selectivity for heavy metals. The physicochemical properties of this material were studied using elemental analyses, AAS, SEM, XRD, FTIR and simultaneous TGA-DTA studies. Ion-exchange capacity, pH-titrations, elution and distribution behavior were also carried out to characterize the material. Distribution studies revealed the cation-exchange material to be highly selective for Hg(II) and its selectivity was performed by achieving some important binary separations like Hg²⁺-Zn²⁺, Hg²⁺-Ni²⁺, Hg²⁺-Cu²⁺, Hg²⁺-Fe³⁺, Hg²⁺-Cd²⁺, Hg²⁺-Mg²⁺ etc. on its column. Using this electroactive composite material, a new heterogeneous precipitate based selective ion-sensitive membrane electrode was fabricated for the determination of Hg(II) ions in solutions. The membrane electrode is mechanically stable, with a quick response time, and can be operated within a wide pH range. The selectivity coefficients for different cations determined by mixed solution method were found to be less than unity The electrode was also found to be satisfactory in electrometric titrations.     

Bis(dimethylamino)trifluoromethylsulfonium Salze: [CF3S(NMe2)2]+[Me3SiF2]‐, [CF3S(NMe2)2]+[HF2]‐ und [CF3S(NMe2)2]+[CF3S]‐

Bis(dimethylamino)trifluoro sulfonium Salts: [CF₃S(NMe₂)₂]⁺[Me₃SiF₂]^‐, [CF₃S(NMe₂)₂]⁺ [HF₂]^‐ and [CF₃S(NMe₂)₂]⁺[CF₃S]^‐ From the reaction of CF₃SF₃ with an excess of Me₂NSiMe₃ [CF₃(NMe₂)₂]⁺[Me₃SiF₂]^‐ (CF₃‐BAS‐fluoride) ( 5 ), from CF₃SF₃/CF₃SSCF₃ and Me₂NSiMe₃ [CF₃S(NMe₂)₂]⁺‐ [CF₃S]^‐ ( 7 ) are isolated. Thermal decomposition of 5 gives [CF₃S(NMe₂)₂]⁺ [HF₂]^‐ ( 6 ). Reaction pathways are discussed, the structures of 5 ‐ 7 are reported.