Ni(phen)(H2O)(V2O6)的水热合成和晶体结构（英）

A novel compound Ni(phen)(H₂O)(V₂O₆) has been hydrothermally synthesized and structurally determined to be a two-dimensional compound, which contains {V₂O₆}_n^2n- chains interconnected by nickel(Ⅱ) complexes via oxygen atoms. The crystallographic data measured by single-crystal X-ray diffraction analysis are as follows: C₁₂H₁₀N₂NiO₇V₂, M_r=454.81, monoclinic, space group P2₁/c, a=0.784 6(3), b=2.103 6(8), c=0.942 3(4) nm, β=112.872(5)°, V=1.433 0(10) nm³, Z=4, D_c=2.104 Mg·m^-3, μ(Mo Kα)=2.615 mm^-1, F(000)=904, T=298(2) K, 4 480 reflections collected, 2 470 independent (R_int=0.032 2), the final R=0.058 4 and wR₂=0.145 7 for 2 303 observed reflections with I>2σ(I). CCDC: 192520.     

Synthesis of Bioactive Organic-Inorganic Hybrids with γ-Methacryloxypropyltrimethoxysilane

Bioactive organic-inorganic hybrids were synthesized through sol-gel processing starting from -methacryloxypropyltrimethoxysilane. NMR-spectroscopic studies showed the presence of silanol groups (Si–OH) and Si–O–Si bonds. In vitro tests of the hybrids for bioactivity with a simulated body fluid (Kokubo solution) indicated that only calcium-containing hybrids could form apatite on their surfaces. Thus the presence of calcium ions was no less important to deposit apatite than the formation of silanol groups or Si–O–Si bonds.     

PW_(11)/SBA-15介孔杂化材料的直接合成与表征

采用三嵌段共聚物EO20PO70EO20(P123)为模板剂,正硅酸乙酯(TEOS)和缺位Keggin型多金属氧酸盐Na7PW11O39(PW11)为无机前驱体,由共缩合法一步合成了PW11/SBA-15介孔杂化材料.通过红外(IR)光谱、紫外-可见漫反射光谱(UV-Vis/DRS)、X射线衍射(XRD)、低温N2吸附、透射电子显微镜(TEM)等手段对杂化材料和合成过程进行了表征.结果表明:杂化材料中不仅多金属氧酸盐的Keggin单元保留完整,且共价键联于介孔孔道内部,而且样品基本具有规整有序的六方介孔结构.TEOS预水解时间的长短对有序结构的构筑有明显影响,随预水解时间延长,样品的介观有序性增加.这是因为多金属氧酸盐对模板剂P123有盐析作用,其作用大小与多金属氧酸盐前驱物的溶解度有关.     

Electrochromatography in cyclic olefin copolymer microchips: A step towards field portable analysis

In order to develop a portable and disposable instrument for on-site analysis of neutral compounds, a lauryl methacrylate monolith has been synthesized into a cyclic olefin copolymer microdevice for reversed-phase electrochromatography purposes. This monolith was tested in capillary to evaluate electrochromatographic performances in terms of electroosmotic flow (EOF) mobility, retention and efficiency prior to its transfer into the microfluidic device. The produced monolithic bed exhibited a good run-to-run repeatability, column-to-column reproducibility and batch-to-batch reproducibility, with relative standard deviation (RSD) values below 9% for EOF mobility, retention factors and heights of theoretical plate. The electrochromatographic performances of the monolith were optimized by reducing irradiation time. Photopolymerization time of 10 min was found to be the best process in order to obtain a robust, retentive and efficient system. The on-chip performances of this monolith were evaluated in detail for the reversed-phase electrochromatographic separation of polycyclic aromatic hydrocarbons, with plate heights reaching down to 15 μm when working at optimal velocity. Aiming at the maximum simplification of instrumental fabrication and operation, a direct injection from a 2 μL droplet was compared with more conventional dynamic injection process.     

共溶剂对超临界CO_2注入技术制备聚丙烯/SiO_2纳米复合材料的影响(英文)

采用超临界CO2注入技术制备聚合物-无机纳米粒子复合材料,以乙醇作为共溶剂,在超临界CO2中将正硅酸乙酯(TEOS)注入到聚丙烯(PP)中,重点研究共溶剂乙醇对TEOS在PP中注入率的影响.实验结果表明注入率随着共溶剂加入先增加后减小.同时研究了在共溶剂的存在下其他实验条件对注入率的影响.并采用卢瑟福背散射能谱法(RBS)分析了聚丙烯/SiO2纳米复合材料的注入元素深度分布,发现Si元素在PP中的浓度分布不均匀,随着深度的增加而减小.     

整体式 Cu-ZSM-5 催化剂上 NH3 选择性催化还原 NO 活性

 采用浸渍法制备了一系列不同 Cu 含量的 Cu-ZSM-5 催化剂, 并用于 NH₃ 选择性催化还原 (SCR)NO 反应. 结果表明, 当 Cu 含量为 8%时, Cu-ZSM-5 催化剂的活性最高; 当空速为 30 000 h^–1. , 在 198~440 ^oC 反应时 NO 转化率均高于 80%, 最高可达 97%, 且空速的影响较小. 经快速水热老化后, 该催化剂活性明显优于商用 V 基催化剂. H₂O 和 SO₂ 对 Cu-ZSM-5 催化剂的 SCR 活性有所影响, 但可明显恢复. X 射线衍射和 NH3 程序升温脱附结果表明, 当 Cu-ZSM-5 中 Cu 含量为 8% 时, 进入 ZSM-5 中阳离子位的 Cu 较多, 催化剂的活性较高, 且其表面具有较多的酸中心和酸量, 从而有利于 SCR 反应.     

A New Supramolecular Compound Based on Cd（II）-Schiff-base and Keggin-type [PMo_（12）O_（40）]~3

A new supramolecular compound, {[Cd(L)2]2[PMo12O40NO3]·CH3CN·2H2O}n 1 (L is 1,4-bis(4-imidazolyl)-2,3-diaza-1,3-butadiene), based on Cd(II)-Schiff-base and Keggin- type [PMo12O40]3- was synthesized via self-assembly and structurally characterized by elemental analysis, infrared spectroscopy, and single-crystal X-ray diffraction analysis. The crystal is of triclinic, space group P1 with a = 12.0128(11), b = 13.6196(13), c = 13.9995(13) , α = 103.868(2), β = 95.225(2), γ = 101.024(2)°, V = 2160.0(3) 3, Z = 1, C34H39N26O45Cd2Mo12P, Mr = 2938.96, Dc = 2.259 g/cm3, μ = 2.276 mm-1, F(000) = 1400, the final R = 0.0565 and wR = 0.1613 for 4973 observed reflections with I 2σ(I). The crystal structure can be described by the packing of Keggin anionic and Metal-Schiff-base cationic layers.     

Solvothermal indium fluoride chemistry: Syntheses and crystal structures of K5In3F14, β-(NH4)3InF6 and [NH4]3[C6H21N4]2[In4F21]

The solvothermal syntheses and crystal structures of three indium fluorides are presented. K₅In₃F₁₄ (1) and β-(NH₄)₃InF₆ (2) are variants on known inorganic structure types chiolite and cryolite, respectively, with the latter exhibiting a complex and apparently novel structural distortion. [NH₄]₃[C₆H₂₁N₄]₂[In₄F₂₁] (3) represents a new hybrid composition displaying a unique trimeric metal fluoride building unit.     

核壳结构Ziegler-Natta复合催化剂的制备及其乙烯聚合

采用溶胶-凝胶法,将聚(苯乙烯-co-丙烯酸)(PSA)膜材料和氯化镁的复合物包覆在以硅胶为载体的TiCl3催化剂上,负载TiCl4后制得Ziegler-Natta复合催化剂.采用红外光谱、激光粒度仪和扫描电镜对催化剂进行了表征,结果表明该复合催化剂呈核壳结构.同时,考察了复合催化剂中膜的厚度和反应中的氢气含量对催化剂的聚合活性和聚乙烯性能的影响,实验发现,膜厚约为3μm的核壳结构复合催化剂活性良好,其具有带诱导期的平稳型动力学曲线;膜厚1.5μm的复合催化剂的活性接近于实验所用的以硅胶为载体的TiCl3催化剂,且其具有相似的衰减型动力学曲线.研究同时表明,不同的膜厚能够调节复合催化剂的氢调性能及所得聚乙烯的分子量分布.     

烟酸稀土分子杂化发光材料的制备与性能研究

利用烯-巯加成的方法,合成了一种带有三联吡啶基团的有机硅氧烷,该中间体用核磁共振、红外、质谱等手段进行了表征确认.以该中间体作为第二配体,加入稀土(Eu3+、Tb3+)烟酸配合物,在正硅酸乙酯的存在下用溶胶-凝胶法原位制备了稀土(Eu3+、Tb3+)烟酸配合物与二氧化硅基质以共价键相连的烟酸稀土分子杂化发光材料.通过红外光谱、紫外-可见光漫反射光谱、荧光光谱和寿命测试表征了制备的杂化发光材料.荧光光谱数据表明在杂化材料中,由于三联吡啶配体通过有效的分子内传能过程将其激发态的能量传递给稀土离子的发射能级,从而极大地提高了稀土离子的特征发射.掺铕离子的最强发射为617nm,是纯红光发射;而掺铽离子的最强发射为543nm,是典型的绿光发射.掺铕和铽的分子杂化材的荧光寿命分别为0.66ms,0.68ms,同时荧光衰减均为一级指数衰减,说明稀土离子在杂化材料中分散得很均匀.