Rheological and antimicrobial properties of epoxy-based hybrid nanocoatings

The modification of nanocomposite coatings with fillers having unique characteristics in the polymeric matrix is a promising strategy to enhance the durability as well as to prevent the growth of microorganisms that decrease the stability of the materials. This study was conducted to evaluate the rheological and antimicrobial behavior of epoxy-based nanocomposite coatings filled with nanosilica, titanium oxide (TiO₂) and zinc oxide (ZnO) against Staphylococcus aureus and Escherichia coli. A rheometer was used for characterizing the rheological properties of the various fillers embedded epoxy nanocomposite coatings. All of the composites inhibited the growth of Staphylococcus aureus and Escherichia coli on modified Kirby Bauer antimicrobial testing, only when they are in contact with samples. Upon quantitative analysis, bioactive constituent dependent antimicrobial activity was observed which increased with the exposure of contact times. The epoxy/silica/TiO₂/ZnO (ESTZ) coating showed the highest bacterial reduction of more than 95% for 4 h of treatment. The bioactivity was decreased for the case of epoxy/silica/ZnO (ESZ) or epoxy/silica/TiO₂ (EST). The combined effect of the nanosilica, TiO₂, and ZnO shows the highest performance in terms of stress, viscosity and torque compared to the individual effect of these three fillers onto the epoxy. Results showed that the shear stress of ESZ, EST, epoxy/silica (ES), and ESTZ coating was increased by 4.4%, 7.7%, 32.2%, and 42%, respectively, compared to the neat epoxy (NE) coating. The torque versus strain curve also showed that the torque of ESTZ composites was the highest (0.52 mN m) compare to NE (0.36 mN m), ESZ (0.38 mN m), EST (0.40 mN m), and ES (0.45 mN m). The studies indicate that the epoxy-based thermoset nanocomposite coatings can be utilized as bactericidal surfaces for the industrial and medical purpose to reduce microbial growth.     

Low velocity impact response of flax/polypropylene hybrid roving based woven fabric composites: Where does it stand with respect to GRPC?

Flax-PP based thermally bonded roving (TBR) has a unique structure where the flax fibres remain twist-free and fully aligned along the roving axis. The present study describes an experimental investigation on the low velocity impact (LVI) behaviour of the TBR based woven fabric composites and compares the same with plain woven glass fabric reinforced PP composites (GRPC). Two different fabric architectures namely plain woven (PW) and unidirectional (UD) are fabricated using flax/PP based TBR. These TBR based woven fabrics and the glass fabric/PP sheets are consolidated in a compression moulding machine and the resultant composite-laminates are tested for their LVI behaviour. The impact test results revealed that the glass/PP composites absorb more energy and exhibit a higher peak load than both TBR based PW and UD fabric composites. However, the specific load and energy of all flax/PP composites are higher than the glass/PP composite. The damage tolerance of all composite laminates are evaluated by comparing their flexural strength before and after the impact. It is observed that the proportionate loss in flexural strength due to impact thrust is larger in case of glass/PP composites than all flax-PP composites.     

一个各向异性磁稀释杂化钙钛矿系列[CH3NH3][CoxZn1-x(HCOO)3]

Inorganic-organic or hybrid perovskite materials, which are the complementary counterparts of pure inorganic perovskites, can provide many new opportunities in the researches of phase transitions, critical phenomena, and relevant properties, as they combine the characteristics of inorganic and organic components. Therefore, the hybrid perovskites of ammonium metal formate framework are very promising, and their properties have been found to be strongly dependent on the characteristics of the constituent metal ions and/or ammonium ions. Herein, we used solid solution strategies, borrowed from solid state chemistry, to investigate the anisotropic diluted magnetic hybrid perovskite system of [CH₃NH₃][Co_xZn_1-x(HCOO)₃], wherein the B-sites are occupied by the mixed metal ions of Co²⁺ and Zn²⁺. The solid solution compounds of this series in the range x = 0–1 (or the molar percent Co% = 0–100%) were successfully prepared using conventional solution chemistry methods. The resulting compounds were demonstrated to be iso-structural by using both single-crystal and powder X-ray diffraction analyses. The solid solution crystals belong to the orthorhombic space group Pnma, with the cell parameters being a = 8.3015(2)–8.3207(3) Å, b = 11.6574(4)–11.6811(5) Å, c = 8.1315(3)–8.1427(4) Å, and V = 787.89(5)–790.98(7) ų. The perovskite structure consists of a simple cubic anionic metal-formate framework and CH₃NH₃⁺ cations which are located in the framework cavities, with N―H···O hydrogen bonds formed between the framework and the cation. The members of this series showed negligible changes (< 0.4%) in their respective lattice and structural parameters. Thus, the prepared solid solution compounds constitute good molecule-based examples for the study of magnetic dilution under almost the same structural parameters and molecular geometries. Upon dilution, the magnetization per mole of Co at low temperatures and low fields was suppressed by the magnetic anisotropy of Co²⁺ and gradual destruction of the large spin canting between coupled Co²⁺ ions, in contrast to the magnetization enhancement observed in the isotropic diluted system of [CH₃NH₃][Mn_xZn_1-x(HCOO)₃] with the same perovskite structure. The percolation limit was estimated as (Co%)_P = 27(1)% (or x_P = 0.27(1)) from the magnetic data, which was slightly lower than that predicted by the percolation theory for a simple cubic lattice (31%); this trend was due to the strong magnetic anisotropy of the present system. In addition, rare incommensurate phase transitions were primarily detected below ~120 K for the pure Co and Zn members, which may also affect the magnetic properties of the materials.     

Hybrid Copolymerization via the Combination of Proton Transfer and Ring-opening Polymerization

Phosphazene base,t-BuP2,was employed to catalyze the proton transfer polymerization(PTP)of 2-hydroxyethyl acrylate(HEA),and PTP was further combined with ring-opening polymerization(ROP)to exploit a new type of hybrid copolymerization.The studies on homopolymerization showed that t-BuP2 was a particularly efficient catalyst for the polymerization of HEA at room temperature,giving an excellent monomer conversion.Throughout the polymerization,transesterification reactions were unavoidable,which increased the randomness in the structures of the resulting polymers.The studies on copolymerization showed that t-BuP2 could simultaneously catalyze the hybrid copolymerization via the combination of PTP and ROP at 25°C.During copolymerization,HEA not only provided hydroxyl groups to initiate the ROP ofε-caprolactone(CL)but also participated in the polymerization as a monomer for PTP.The copolymer composition was approximately equal to the feed ratio,demonstrating the possibility to adjust the polymeric structure by simply changing the monomer feed ratio.This copolymerization reaction provides a simple method for synthesizing degradable functional copolymers from commercially available materials.Hence,it is important not only in polymer chemistry but also in environmental and biomedical engineering.     

ZIF-67 derived hollow Ni-Co-Se nano-polyhedrons for flexible hybrid supercapacitors with remarkable electrochemical performances

Nano-polyhedral NiSe₂/CoSe₂ (Ni-Co-Se) with hollow architectures are synthesized by selenizing the precursors of Ni-Co bimetallic hydroxides that are directly derived from ZIF-67. The as-fabricated Ni-Co-Se electrodes exhibit high specific capacitance of 1668 F/g at 1 A/g accompanying with outstanding rate capability (about 82.8% retention of the initial capacity at 20 A/g). The corresponding Ni-Co-Se//AC all-solid-state hybrid supercapacitors are assembled by directly using the Ni-Co-Se on carbon fabric as the positive electrode, which deliver high energy density and power density (38.5 Wh/kg at 802.1 W/kg, 32.0 Wh/kg at 8008.8 W/kg), excellent cyclic stability (82.3% retention after 5000 cycle) and robust mechanical flexibility (no obvious attenuation at bending to different angles). This work will provide a new and smart route for constructing transition metal selenides for supercapacitor devices.     

On the inflation and deflation dynamics of liquid-filled,hyperelastic balloons

We derive a reduced-order model describing the inflation and deflation dynamics of a liquid-filled hyperelastic balloon, focusing on inviscid laminar flow and the extensional motion of the balloon. We initially study the flow and pressure fields for dictated motion of the solid, which throughout deflation are obtained by solving the potential problem. However, during inflation, flow separation creates a jet within the balloon, requiring a different approach. The analyses of both flow regimes lead to a simple piecewise model, describing the fluidic pressure during inflation and deflation, which is verified by finite element computations. We then use a variational approach to derive the equation describing the interaction between the extensional mode of the balloon and the entrapped fluid, yielding a nonlinear hybrid oscillator equation. Analytical and graphical investigations of the suggested model are presented, shedding light on its static and dynamic behaviour under different operating conditions. Our simplified model and its underlying assumptions are verified utilizing a fully coupled finite element scheme, showing excellent agreement.     

基于石墨烯/石墨烯卷轴复合薄膜高灵敏度柔性压力传感器

一维导电材料例如纳米线,大量应用于柔性压力传感器中. 但是一维材料和基底之间接触时相互作用力较弱,使得传感器灵敏度、响应时间、和循环寿命等性能指标有待进一步提高. 针对这些问题,设计了石墨烯/石墨烯卷轴多分子层复合薄膜作为传感器导电层. 石墨烯卷轴具有一维结构,而石墨烯的二维结构可以牢固地固定卷轴,以确保高导电性复合薄膜与基底之间的粘附性,同时整体结构的导电通道得到了增加. 由于一维和二维结构的协同效应,实现了应变灵敏度系数3.5 kPa^-1、 响应时间小于50 ms、能够稳定工作1000次以上的压阻传感器.     

曲面相机阵列多分辨成像方法

针对现有成像系统因数据冗余而无法兼顾大视场、高分辨、高效性的问题,结合人眼视网膜变分辨成像和并列式复眼成像原理,设计一种多分辨率成像的复合仿生成像系统.该成像系统按照球面和平面兼顾的曲面布局方式,利用11个相机镜头构建相机阵列,组成了四个等级分辨率的子眼拍摄模块.通过物距100 m的远景实验和物距10 m的近景实验发现,该系统在实现高分辨成像的同时,获得总视场达150.8°×37.8°.多分辨率成像实验结果表明,该系统获取的图像的分辨率从中心视场到边缘视场逐渐降低,并且相较于中心清晰全视场成像,四级分辨率成像的拼接图像数据量减少了17.2倍的数据冗余.     

Sonochemical approach for synthesis of zinc oxide-poly methyl methacrylate hybrid nanoparticles and its application in corrosion inhibition

Hybrid nanoparticles (HNPs) with zinc oxide and polymethyl metha acrylate (inorganic/ polymer) were synthesized through the exploitation of ultrasound approach. The synthesized HNPs were further characterized employing transmission electron microscopy and x-ray diffraction. ZnO-PMMA based HNPs exhibit excellent protection properties to mild steel from corrosion when gets exposed to acidic condition. Electrochemical impendence spectroscopy (EIS) analysis was accomplished to evaluate the corrosion inhibition performance of MS panel coated with 2 wt% or 4 wt% of HNPs and its comparison with bare panel and that of loaded with only standard epoxy coating., Tafel plot and Nyquist plot analysis depicted that the corrosion current density (I_corr) decreases from 16.7 A/m² for bare material to 0.103 A/m² for 4% coating of HNPs. Applied potential (E_corr) values shifted from negative to positive side. These results were further supported by qualitative analysis. The images taken over a period of time indicated the increase in lifetime of MS panel from 2 to 3 days for bare panel to 10 days for HNPs coated panel, showing that ZnO-PMMA HNPs have potential application in metal protection from corrosion by forming a passive layer.     

折衍混合复消色差望远物镜设计的PWC方法

将衍射结构视为折射率无限大的薄透镜,研究了衍射透镜高折射率表示的折衍混合复消色差望远物镜设计的PWC方法;设计了焦距为2000mm、相对孔径为1/15的双片型折衍混合复消色差望远物镜,并与常规三片型纯折射复消色差望远物镜进行了比较,结果表明双片型折衍混合复消色差望远物镜具有更好的二级光谱校正能力,色球差更小,因此具有更好的成像质量.