A sensitive mediator-free tyrosinase biosensor based on an inorganic-organic hybrid titania sol-gel matrix

A novel inorganic-organic hybrid titania sol-gel nanocomposite film was prepared to fabricate a sensitive tyrosinase biosensor for the amperometric detection of trace phenolic compounds without additional electron mediators. Acetylacetone worked as a complexing ligand to chelate with Ti atom in the synthesis process, and the pH of the titania solution could be adjusted to the value which was optimum for retaining tyrosinase activity and such a membrane was stably attached on to the surface of a glassy carbon electrode (GCE). This titania matrix could supply a good environment for enzyme loading, which resulted in a high sensitivity of 15.78 μA μM⁻¹ cm⁻² for monitoring phenols with a detection limit of 1×10⁻⁸ M at a signal-to-noise ratio of 3. The TiO₂ sol-gel derived biosensor exhibited a fast response less than 10 s and a good stability for more than 2 months.     

Condensation reaction of 3-(methacryloxypropyl)-trimethoxysilane and diisobutylsilanediol in non-hydrolytic sol-gel process

The condensation reaction of 3-methacryloxypropyl-trimethoxysilane (MPTS) and diisobutylsilanediol (DIBSD) in a non-hydrolytic sol-gel process was investigated in terms of the reaction time and the catalyst amount for fabrication of inorganic-organic hybrid materials. The degree of condensation, which was characterized by ²⁹Si NMR, ¹H NMR and Abbe refractometry, increases with increased the reaction time and greater catalyst amount. However, a the large catalyst amount breaks the methacryl group during the condensation reaction. Thus, the reaction time and the catalyst amount were optimized to synthesize the condensed methacryl oligosiloxanes.     

γ辐照引发无皂乳液聚合法一步合成Ag-聚4-乙烯基吡啶杂化微凝胶

无机-聚合物纳米复合材料是将聚合物与一种或多种无机纳米粒子复合而成的一种材料,它同时具有无机纳米粒子和聚合物的优良特性,在许多重要技术领域具有广泛的应用前景.近20年来,无机-聚合物纳米复合材料的制备及应用备受关注[1~6].包括杂化微凝胶在内的纳米复合微球是无机-聚合     

Spectrophotometric resolution of ternary mixtures of pseudoephedrine hydrochloride, dextromethorphan hydrobromide, and sodium benzoate in syrups using wavelength selection by net analyte signals calculated with hybrid linear analysis

Hybrid linear analysis (HLA), as a recent factor-based multivariate calibration technique, was applied for the spectrophotometric determination of ternary mixtures of pseudoephedrine hydrochloride (PSU), dextromethorphan hydrobromide (DXT), and sodium benzoate (BNZ). The utilized HLA was assisted by a wavelength selection procedure which was based on the calculation of the net analyte signal (NAS) regression plot in any considered wavelengths window for each test sample, in addition to a moving window strategy for searching the region with maximum linearity of NAS regression plot (minimum error indicator (EI)). HLA was applied because it was simpler to adapt to the NAS regression plot methodology, and also used less factors than partial least squares (PLS). An orthogonal array design was applied for formation of calibration and prediction sets in the concentration ranges 0-7500 μmol L⁻¹ for PSU, 0-300 μmol L⁻¹ for DXT, and 0-1400 μmol L⁻¹ for BNZ. The method had the ability to select wavelength regions that minimize the effect of non-linearity of the spectral data, in addition to that of non-modeled interferences. The application of the selected wavelength regions improved the obtained relative standard error of predictions for PSU, DXT, and BNZ, respectively, from 5.24, 8.67, and 5.48% to 2.19, 5.21, and 3.62% (using lower number of factors). To check the ability of the proposed method in selection of linear regions of spectra, a test for detecting non-linear regions of spectral data in multivariate spectroscopic assays was also described. Additives in the commercial syrup samples did not interfere with their determinations. The method was successfully applied for the determination of pseudoephedrine HCl, dextromethorphan HBr, and sodium benzoate in cough suppressant syrup samples.     

Synthesis of an N-glycan decasaccharide of the hybrid type

A hybrid-type N-glycan decasaccharide GlcNAcMan₇GlcNAc₂ was synthesized from the pentasaccharide GlcNAcMan₂GlcNAc₂ as an advanced intermediate and an acyl-protected pentamannosyl donor. Benzyl mannoside was regioselectively benzoylated and glycosylated at OH-3 and OH-6 with a dimannoside to give the 3,6-branched pentamannoside. Coupling of the two pentasaccharides furnished the target decasaccharide in 60% yield. Deprotection of the base labile functions furnished a hybrid-type N-glycan decasaccharide functionalized for the conjugation with peptides or proteins.     

Study of high-performance liquid chromatographic separation of selected herbicides by hydro-methanolic and micellar liquid chromatography using Genapol X-080 non-ionic surfactant as mobile phase constituent

Chromatographic behaviour of six selected herbicides (chlortoluron, metoxuron, chloridazon, simazine, propazine and atrazine) was studied by reversed-phase (RP) high-performance liquid chromatography (HPLC) containing Genapol X-080 non-ionic surfactant as methanol/water mobile phase constituent. The concentration of methanol was changed from 50 to 0% (v/v) for constant 2% (v/v) concentration of the surfactant. The surfactant concentration in purely aqueous micellar mobile phase varied from 1 to 5% (v/v) what is approximately 360-1800 times above the CMC. Within this concentration range Genapol X-080 proves concentration dependent selectivity changes for chlortoluron/atrazine critical pair not occurred in hydro-methanolic mobile phases. Further studies revealed that this chromatographic system offers high compatibility with cloud-point extraction environmental sample pretreatment approaches using Genapol X-080 for the purpose, too.     

New and novel organic-inorganic type crystalline ‘polypyrrolel/polyantimonic acid’ composite system: preparation, characterization and analytical applications as a cation-exchange material and Hg(II) ion-selective membrane electrode

A new phase of ‘organic-inorganic’ composite system, polypyrrole polyantimonic acid, prepared by mixing the inorganic precipitate of hydrated antimony oxide with organic conducting polymer i.e., polypyrrole, providing a novel granular form hybrid cation-exchanger suitable for column operation with better chemical and thermal stability, good ion-exchange capacity, reproducibility and selectivity for heavy metals. The physicochemical properties of this material were studied using elemental analyses, AAS, SEM, XRD, FTIR and simultaneous TGA-DTA studies. Ion-exchange capacity, pH-titrations, elution and distribution behavior were also carried out to characterize the material. Distribution studies revealed the cation-exchange material to be highly selective for Hg(II) and its selectivity was performed by achieving some important binary separations like Hg²⁺-Zn²⁺, Hg²⁺-Ni²⁺, Hg²⁺-Cu²⁺, Hg²⁺-Fe³⁺, Hg²⁺-Cd²⁺, Hg²⁺-Mg²⁺ etc. on its column. Using this electroactive composite material, a new heterogeneous precipitate based selective ion-sensitive membrane electrode was fabricated for the determination of Hg(II) ions in solutions. The membrane electrode is mechanically stable, with a quick response time, and can be operated within a wide pH range. The selectivity coefficients for different cations determined by mixed solution method were found to be less than unity The electrode was also found to be satisfactory in electrometric titrations.     

Synthesis, characterization and thermal properties of novel epoxy containing silicon and phosphorus nanocomposites by sol-gel method

Organic-inorganic hybrids were prepared using diglycidyl ether of bisphenol A (DGEBA) type epoxy and tetraethoxysilane via the sol-gel process. The DGEBA type epoxy was modified by a coupling agent to improve the compatibility of the organic and inorganic phases. The sol-gel technique was used successfully to incorporate silicon and phosphorus into the network of hybrids increasing flame retardance.Fourier transform infrared spectroscopy and ²⁹Si nuclear magnetic resonance spectroscopy were used to characterize the structure of the hybrids. In condensed siloxane species for TEOS, silicon atoms through mono-, di-, tri-, and tetra-substituted siloxane bonds are designated as Q¹, Q², Q³, Q⁴, respectively. For 3-isocyanatopropyltriethoxysilane and diethylphosphatoethyltriethoxysilane, mono-, di-, tri-, tetra-substituted siloxane bonds are designated as T¹, T², T³. Results revealed that Q⁴, Q³, T³ are the major environments forming a network structure. The morphology of the ceramer was examined by scanning electron microscopy and Si mapping. Particle sizes were below 100 nm. The hybrids were nanocomposites. The char yield of pure epoxy resin was 14.8 wt.% and that of modified epoxy nanocomposite was 31 wt.% at 800 °C. A higher char yield enhances the flame retardance. Values of limiting oxygen index of pure epoxy and modified epoxy nanocomposites are 24 and 32, respectively, indicating that modified epoxy nanocomposites possess better flame retardance than the pure epoxy resin.     

Combined investigation of experimental characterization and theoretic calculation on the structure of dextran-Fe3O4 clusters

Dextran-Fe₃O₄ hybrid clusters were fabricated by coprecipitating ferric and ferrous ions in the presence of dextran, and after characterization of these clusters combined with calculation based on classical nucleation theory, a structure model of these hybrid clusters was proposed. The hybrid cluster was believed including small Fe₃O₄ nanoparticles and dextran which acted as both nucleating agent and stabilizer, so that exist in both the inside of magnetite nanoparticles and the periphery of the hybrid clusters. Besides, the effects of W_CD (weight_{iron cation}:weight_dextran) and molecular weight of dextran on the size, morphology and magnetic property of clusters were also investigated in this paper. It was found that the variation of W_CD and molecular weight of dextran have great effect on the size of the hybrid clusters, but have almost no effect on the size of the Fe₃O₄ nanoparticles. The characterization of magnetic property demonstrated that the Fe₃O₄ nanoparticles are of a single domain and the saturation magnetization was affected by the size of dextran-Fe₃O₄ hybrid clusters.