强湍流效应下激光大气传输短曝光光斑统计分析

利用数值模拟的方法,对强湍流效应下激光大气传输焦平面短曝光光斑的统计特性进行了初步分析,并与实验结果进行了对比。结果表明:在强湍流效应下,焦平面短曝光光斑破碎成一系列的小光斑,这些破碎光斑的等效半径与爱里斑半径近似相等;接收器中心置于光轴轴心处,当接收孔径等于爱里斑直径时,接收的均值光强最大。     

The simulation of infrared bands from the analyses of rotational spectra: the 2ν9-ν9 and ν5-ν9 hot bands of HNO3

The results of millimeter and submillimeter wave rotational spectroscopy are used to simulate the complex structure of the 2ν₉-ν₉ and ν₅-ν₉ hot bands. The comparison data were obtained with a high-resolution Bruker FTIR. The combination of the quality of these data and the complexity of the spectra of these interacting states represents a stringent test for the simulation. It is shown that the agreement is very good and that this approach is generally advantageous. From this simulation, the ratios of the transition dipole moments for the 2ν₉-ν₉ and ν₅-ν₉ hot bands with respect to the ν₉ fundamental band were found to be 1.38(11) and 0.67(20), respectively. Using these results, the calculated integrated band intensities for the hot bands at were determined to be and . These results were used to successfully simulate high-resolution stratospheric spectra obtained from a balloon flight of the FIRS-2 spectrometer. The more general problem of the rotation-vibration database and the optimal use of both microwave and infrared data to define it is discussed. It is concluded that it is best if the combination of data takes place at the level of the original spectra.     

Analysis of the hot bands in the 2ν9 band region of propyne-d3

The rovibrational spectrum of 2ν₉ band of CD₃CCH is overlapped by two prominent hot bands identified as (2ν₉⁰+ν₁₀^±1)(E)←ν₁₀^±1(E) and 3ν₉^±1(E)←ν₉^±1(E), where ν₁₀ and ν₉ are the degenerate CCC and CCH bending fundamental vibrations, respectively. Assignment of lines to the transitions of these hot bands were carried out with the help of the high-resolution spectra recorded at ∼195 K and at room temperature. Molecular parameters for these hot bands have been obtained from the rotational analysis of the partially resolved K-structure lines. Only Q-head of the third hot band , originating from the lower 2ν₁₀ state could be identified.     

(FD)~2TD计算金属表面场增强

本文首次利用依赖于频率的时域有限差分法(FD)2TD来计算隐失波激励下金属粒子表面的场增强。首先,利用(FD)2TD计算了三维球形银粒子的表面场增强,与国外文献[11]中用不同方法对此问题的计算结果进行了对比,结果较为相符,说明我们自己编写的(FD)2TD程序是可信的。然后,利用此程序计算了在全内反射条件下,处于介质板上纳米尺度边长的正三角形银粒子表面的场增强,给出了该正三角形银粒子三角端点存在场增强的所谓"热点"并给出了该处的场增强值随样品距离的变化曲线。     

高功率脉冲激光对阶跃折射率多模光纤损伤机理

 理论分析和模拟仿真研究了激光点火系统中光纤端面损伤、光纤初始输入段损伤和光纤内部损伤机理。结果显示：端面损伤主要是由光纤端面的杂质和缺陷引起；光纤初始输入段损伤是由光束的初次反射造成光纤局部激光能量密度增大引起的；光纤内部体损伤主要由于激光自聚焦效应引起损伤和光纤受到的意外应力产生微小碎片，吸收激光能量，引起光纤局部损伤。给出了激光点火系统中提高光纤损伤阈值的一般方法，主要包括光纤端面处理、设计合理的激光注入耦合装置。     

球差对调焦函数的影响

红外导引头成像光斑测试仪系统的球差对成像光斑质量有很大的影响,降低了光斑的能量集中度.通过对球差因素影响的研究,构造的调焦评价函数能更精确地分辨最佳像面,从而通过自动聚焦寻找最佳像面位置,是测试仪评价其光学系统质量的一个重要环节.     

Direct alpha spectrometry for characterising hot particle properties

Non-destructive analysis methods, especially direct alpha spectrometry but also gamma ray spectrometry and scanning electron microscopy were applied to a nuclear bomb particle from the Thule accident. The use of high-resolution direct alpha spectrometry with the aid of Monte Carlo simulations was demonstrated here in order to determine the properties of this particle. In general, the information that can be obtained through direct alpha spectrometry depends on the information available a priori. For example, known elemental composition makes the assessment of particle dimensions possible even if scanning electron microscopy images are unavailable. Although direct alpha spectrometry may be applied for particle characterisation, further developments in spectrum analysis tools are necessary.     

Organic light‐emitting device dark spot growth behavior analysis by diffusion reaction theory

Dark spot growth rate tracing experiments performed on an organic light‐emitting device show that moisture entering into the device is relatively properly fitted by Fick's diffusion equation in the substrate/indium tin oxide (ITO)/hole transport layer (HTL)/silver (Ag) structure. It is believed that the moisture is dissolved into the polymer layer, which results in a decrease in the diffusion coefficient in the device with the substrate/ITO/HTL/electroluminescent (EL) polymer/Ag structure. The diffusion and chemical reaction occurring in the cathode layer further decreases the diffusion coefficient in the device with the substrate/ITO/HTL/EL polymer/calcium/Ag structure. Useful parameters, such as diffusion and solubility constants, describing possible mechanisms happening during dark spot growth on organic light‐emitting diode devices are extracted. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1697–1703, 2001     

Hot embossing of PTFE: Towards superhydrophobic surfaces

Three types of reusable stamps with features in the form of 2D arrays of pits having lateral dimensions in the range of 2-80 μm and heights of 1.5-15 μm were successfully employed for the hot embossing of PTFE at temperatures up to 50 °C above the glass transition temperature of PTFE amorphous phase. Due to the softening of PTFE at the temperatures used in this study, we were able to decrease imprint pressure significantly when comparing with the imprint conditions reported by other authors. Impact of the imprint temperature, pressure and time on the fidelity of pattern transfer as well as on water repellency was tested. The best results of embossing were achieved by applying pressure of 10 kg/cm² for 2 min at 170 °C. In this case, flattening of a natural PTFE roughness and pretty accurate deep replicas of the stamp patterns were observable on the whole imprinted area. Improvement in water repellency was largest for the samples imprinted by Ni stamp patterned with a 2D array of 2 μm square pits spaced by the same dimension and having a depth of 1.5 μm. Cassie-Baxter wetting regime was observed for the deepest imprints with water contact angles up to the superhydrophobic limit.