Die Isolierung radioaktiv markierter nichtmetallischer Einschlüsse aus Hochlegierten Stählen

Zur Isolierung von Einshlüssen aus hochlegierten Stählen werden die Hauptkomponenten Fe, Ni, Cr und weitere Metalle durch mehrstufig ausgeführte Flüssig-Flüssig-Extraktionen mit verschiedenen Extraktionsmitteln abgetrennt. Die im Eindampfrückstand der wäβrigen Phase nach der Extraktion verbleibenden Einschlüsse können für die meisten Radionuklide ohne nennenswerte Selbstabsorption mit einem Groβflächenzählrohr oder anderen geeignetenZählvorrichtungen ausgemessen werden.     

Analysis of some Elements in Fuel Oil by using Neutron Capture Gamma Ray Spectroscopy

The analysis of some elements in fuel oil was done by using neutron capture gamma ray spectroscopy. The gamma rays emitted after the reaction of (n, γ) from the fuel oil atoms bombarded with the thermal neutrons emitted from a ²⁵²Cf source were investigated in the energy interval 0 … 10 MeV. The impurity elements in the sample were determined.     

Sputtering of SiC with low energy He and Ar ions under grazing incidence

The effect of low energy sputtering under grazing incidence upon the surface composition of SiC was investigated by Auger electron spectroscopy. The energy of the sputtering projectiles (He, Ar) varied from 200 to 1500?eV. Peak shifts to the higher energies with increasing argon ion energy were observed for all silicon and carbon Auger transitions. These shifts were explained by enhanced damage of the surface region within the sampling depth of the Auger electrons. The insensitivity of the Auger peak position to the energy of helium ions indicates that the damage state in the surface region does not change with the increasing energy of helium ions. An increase of the carbon concentration with the decrease of the argon energy was observed. The experiments were accompanied by dynamic Monte Carlo simulations by the TRIDYN code.     

Wigner dynamics of quantum semi-relativistic oscillator

The integral Wigner–Liouville equation describing time evolution of the semi-relativistic quantum 1D harmonic oscillator have been exactly solved by combination of the Monte Carlo procedure and molecular dynamics methods. The strong influence of the relativistic effects on the time evolution of the momentum, velocity and coordinate Wigner distribution functions and the average values of quantum operators have been studied. Unexpected ‘protuberances’ in time evolution of the distribution functions were observed. Relativistic proper time dilation for oscillator have been calculated.     

Facile synthesis of SnO2–ZnO core–shell nanowires for enhanced ethanol-sensing performance

The design of core–shell heteronanostructures is powerful tool to control both the gas selectivity and the sensitivity due to their hybrid properties. In this work, the SnO₂–ZnO core–shell nanowires (NWs) were fabricated via two-step process comprising the thermal evaporation of the single crystalline SnO₂ NWs core and the spray-coating of the grainy polycrystalline ZnO shell for enhanced ethanol sensing performance. The as-obtained products were investigated by X-ray diffraction, scanning electron microscopy, and photoluminescence. The ethanol gas-sensing properties of pristine SnO₂ and ZnO–SnO₂ core–shell NW sensors were studied and compared. The gas response to 500 ppm ethanol of the core–shell NW sensor increased to 33.84, which was 12.5-fold higher than that of the pristine SnO₂ NW sensor. The selectivity of the core–shell NW sensor also improved. The response to 100 ppm ethanol was about 14.1, whereas the response to 100 ppm liquefied petroleum gas, NH₃, H₂, and CO was smaller, and ranged from 2.5 to 5.3. This indicates that the core–shell heterostructures have great potential for use as gas sensing materials.     

Interactions of gamma rays with undoped and Mn-doped sodium phosphate glasses

Ultraviolet and visible spectroscopic measurements were used to investigate prepared undoped and Mn-doped sodium phosphate glasses before and after successive gamma irradiation. The effects of both glass composition and MnO₂ content on the generation of radiation-induced defects were investigated. Undoped sodium phosphate glass shows strong UV absorption, which is attributed to the presence of trace iron impurities present in the raw materials. Mn-doped glasses reveal an additional visible broad band centered at about 500 nm due to Mn³⁺, which has recently been related to the ⁵E_g →⁵T_2g transition. The radiation-induced bands are correlated with the generation of liberated electron–hole pairs during the process of gamma irradiation and the possibility of photochemical reactions especially with trace iron impurities and manganese ions. The intensity and the position of the induced bands are observed to depend on the type and composition of glass, concentration of the dopant and also on the irradiation dose. Manganese ions when present in relatively higher content have been found to show a shielding behavior towards the effects of progressive gamma irradiation causing a retardation of the growth of the induced defects. Infrared and Raman spectra of the undoped and Mn-doped glasses were measured to investigate the structural phosphate groups present and the effect of MnO₂ on the network structure. An ESR investigation was carried out to confirm the state of manganese ions in the prepared sodium phosphate glasses.     

Effect of interfacial debonding and matrix cracking on mechanical properties of multidirectional composites

In composites, debonding at the fiber–matrix interface and matrix cracking due to loading or residual stresses can effect the mechanical properties. Here three different architectures — 3-directional orthogonal, 3-directional 8-harness satin weave and 4-directional in-plane multidirectional composites — are investigated and their effective properties are determined for different volume fractions using unit cell modeling with appropriate periodic boundary conditions. A cohesive zone model (CZM) has been used to simulate the interfacial debonding, and an octahedral shear stress failure criterion is used for the matrix cracking. The debonding and matrix cracking have significant effect on the mechanical properties of the composite. As strain increases, debonding increases, which produces a significant reduction in all the moduli of the composite. In the presence of residual stresses, debonding and resulting deterioration in properties occurs at much lower strains. Debonding accompanied with matrix cracking leads to further deterioration in the properties. The interfacial strength has a significant effect on debonding initiation and mechanical properties in the absence of residual stresses, whereas, in the presence of residual stresses, there is no effect on mechanical properties. A comparison of predicted results with experimental results shows that, while the tensile moduli E ₁₁, E ₃₃and shear modulus G ₁₂ match well, the predicted shear modulus G ₁₃ is much lower.     

Influence of the deGennes extrapolation parameter on the resistive state of a superconducting strip

We studied the resistive state of a mesoscopic superconducting strip (bridge) at zero external applied magnetic field under a transport electric current, $J_a$, subjected to different types of boundary conditions. The current is applied through a metallic contact (electrode) and the boundary conditions are simulated via the deGennes extrapolation length b. It will be shown that the characteristic current–voltage curve follows a scaling law for different values of b. We also show that the value of $J_a$ at which the first vortex–antivortex (V–Av) pair penetrates the sample, as well as their average velocities and dynamics, strongly depend on the b values. Our investigation was carried out by solving the two-dimensional generalized time dependent Ginzburg–Landau (GTDGL) equation.     

Response properties at the dynamic water/dichloroethane liquid–liquid interface

ABSTRACT

We present a novel approach for calculating the static dielectric permittivity profile of a liquid–liquid interface (LLI) from molecular dynamics simulations. To obtain well-defined features, comparable to those observed at solid–liquid interfaces, we find it essential to reference to the instantaneous liquid–liquid interface rather than the more commonly used average Gibbs interface. We provide a coarse-grained approach for the practical definition of the instantaneous interface and present numerical results for the prototypical water/1,2-dichloroethane system. These results show that the parallel components of the dielectric permittivity tensor can be accurately extracted. In contrast, the perpendicular component does not converge to the correct bulk value at large distances from the LLI, highlighting a flaw in the regularly applied coarse-graining procedure.