土壤与沉积物样品中多氯联苯总量的气相色谱-质谱法快速分析

建立了土壤和沉积物样品中多氯联苯总量的快速分析方法.样品经加速溶剂萃取,Bond ElutPCB SPE小柱净化后,采用气相色谱-质谱测定多氯联苯的总量,方法的平均回收率为84% ～106%,相对标准偏差为4.2% ～8.4%,多氯联苯总量的方法检出限为2.25 ng/g.该方法快速、灵敏、准确,适用于大部分土壤及沉积物样品中多氯联苯总量的快速筛查分析.     

饮料中红花黄色素的固相萃取/超高效液相色谱-质谱测定

利用超高效液相色谱-电喷雾串联四极杆质谱法对从红花中提取纯化的红花黄色素进行结构分析,其包含对羟基红花黄A(34.0%)、红花黄A(27.4%)、脱水红花黄B(23.2%)和红花黄C(8.3%)4种主要成分。建立了测定碳酸类、果汁类饮料中4种色素成分的SPE/UPLC检测方法。利用大孔吸附树脂作为填料,自制SPE固相萃取柱,对饮料中的红花黄色素进行吸附解吸,通过优化固相萃取条件,使得各组分的回收率为84%~116%,相对标准偏差为0.78%~6.6%。各组分在0.40~17 mg/L范围内具有良好的线性关系,线性系数均不小于0.998 8。     

加速溶剂萃取-高效液相色谱-串联质谱法同时检测鱼肉中喹诺酮、磺胺与大环内酯类抗生素

建立了加速溶剂萃取(ASE)-高效液相色谱-串联质谱联用法同时检测鱼肉中22种抗生素药物残留的分析方法。样品经ASE提取,HLB固相萃取柱净化后进入高效液相色谱-串联质谱仪分析。对ASE的萃取条件进行优化,并采用XTerraMSC18柱对药物进行分离,以甲醇-乙腈(体积比1∶1)为色谱流动相A,以0.3%(体积分数)甲酸水溶液(含0.1%甲酸铵,pH=2.9)为流动相B。22种喹诺酮、磺胺和大环内酯类抗生素药物在加标水平为20、100μg/L时的回收率分别为72%～120%与66%～114%,相对标准偏差(RSD,n=5)分别为1.9%～16%与0.7%～10%,方法的检出限为0.02～0.6μg/kg。结果显示所建立的方法精密度好,准确度高,可满足同时对鱼肉样品中多种喹诺酮、磺胺和大环内酯类抗生素残留进行定性及定量分析的要求。     

UPLC-MS/MS对卷烟烟气中4种烟草特有亚硝胺的快速测定

建立了卷烟主流烟气中烟草特有亚硝胺的超高效液相色谱-电喷雾串联质谱(UPLC-MS/MS)测定方法。在标准吸烟条件下,采用剑桥滤片收集卷烟烟气粒相物,用醋酸铵缓冲液提取粒相物,经固相萃取净化后,以电喷雾正离子多反应监测方式,实现了烟气中N-亚硝基降烟碱、4-甲基亚硝基吡啶基丁酮、N-亚硝基新烟草碱和N-亚硝基假木贼碱的基线分离和快速测定。4种烟草特有亚硝胺在0~400μg/L范围内具有良好线性,相关系数大于0.998,定量下限为0.08~0.15μg/L,加标回收率为72%~104%,相对标准偏差为3.8%~9.7%。该方法灵敏、快速、准确,适用于卷烟烟气中烟草特有亚硝胺的测定。     

浸提法-火焰原子吸收光谱法测化妆品中镉的不确定度分析

对浸提法消化试样和火焰原子吸收光谱法测定化妆品中的镉进行不确定度分析。对各主要不确定度的来源进行分析,为有效控制该法测定化妆品的镉含量提供可靠理论依据。     

溶剂萃取法提锂的研究进展

总结了采用溶剂萃取法在盐湖卤水中提取锂资源的三类萃取剂:酸性萃取剂、中性络合萃取剂和碱性萃取剂,分析了三类不同萃取剂在萃取锂工艺过程的优缺点,指出了溶剂萃取法从高镁锂比的盐湖卤水中萃取提锂尚待攻克的技术难题。     

分散固相萃取-高效液相色谱-质谱联用法测定水稻秸秆、糙米、稻壳和土壤中戊唑醇残留

建立了分散固相萃取-液相色谱-质谱法测定水稻秸秆、糙米、稻壳及土壤中戊唑醇残留量。方法以乙腈为萃取溶剂,N-丙基-乙二胺(PSA)为吸附剂,实现样品快速制备;在Zorbax Eclipse XDB-C18色谱柱上,以甲醇-5 mmol乙酸铵缓冲溶液(70/30,V/V)为流动相,采用电喷雾质谱检测器,选择离子监测模式,以m/z308为定量检测离子,戊唑醇保留时间在9.5 min左右,在0.005~2 mg/L范围内浓度与峰面积呈良好的线性关系,相关系数为0.9999。在4种样本中添加不同浓度戊唑醇其平均回收率在73.6%~105.8%,相对标准偏差(n=5)小于15%,检出限(S/N=5)为2.5×10-11g。该方法简单、快速、灵敏、准确。     

Novel surface molecularly imprinted material modified multi-walled carbon nanotubes as solid-phase extraction sorbent for selective extraction gallium ion from fly ash

A new gallium (Ga(III)) ion-imprinted multi-walled carbon nanotubes (CNTs) composite sorbent was synthesized by a surface imprinting technique. The Ga(III) ion-imprinted/multi-walled carbon nanotubes (Ga(III)-imprinted/CNTs) sorbent was characterized by Fourier transform infrared (FT-IR), X-ray diffraction (XRD), nitrogen adsorption experiment, static adsorption experiment, and solid-phase extraction (SPE) experiment. The effects of sample volume, sample pH, washing and elution conditions on the extraction of Ga(III) ion from real sample were studied in detail. The imprinted sorbent offered a fast kinetics for the adsorption of Ga(III). The maximum static adsorption capacity of the imprinted sorbent towards was 58.8 μmol g⁻¹. The largest selectivity coefficient for Ga(III) in the presence of Al(III) was over 57.3. Compared with non-imprinted sorbent, the imprinted sorbent showed good imprinting effect for Ga(III) ion, the imprinting factor (α) was 2.6, the selectivity factor (β) was 2.4 and 2.9 for Al(III) and Zn(II), respectively. The developed imprinted SPE method was applied successfully to the detection of trace Ga(III) ion in fly ash samples with satisfactory results.     

Analysis of microcystins by capillary zone electrophoresis coupling with electrospray ionization mass spectrometry

In this paper, a rapid and effective method based on capillary zone electrophoresis (CZE) coupled with electrospray ionization mass spectrometry (ESI-MS) was established for the trace analysis of microcystin (MC) isomers in crude algae sample. The experimental conditions including the composition, acidity and concentration of buffer, separation voltage, injection time, and MS detection parameters were investigated in detail. A capillary separation system was as follows: a uncoated fused-silica capillary tube (50 μm i.d. × 90 cm), 40 mmol L⁻¹ ammonium acetate solution (pH 9.86) as running buffer, 25 kV as separation voltage, 20 kV × 3 s water first and 20 kV × 20 s for sample injection. Mass analysis was performed in ESI source, with sheath gas temperature 150 °C, sheath gas pressure 10 psi, and sheath gas flow 6 L min⁻¹. And sheath liquid was 7.5 mmol L⁻¹ acetic acid in 50% isopropanol-water (3 μL min⁻¹). Protonation and ammonium adduct molecular ions m/z 506.9 (MC-LR) and 532.0 (MC-YR) were used for the quantification of MCs. Under these conditions, two MCs were baseline separated within 9 min, the calibration curves were obtained in the range of 0.11-10.0 μg mL⁻¹ and 0.16-10.5 μg mL⁻¹ for MC-LR and MC-YR, respectively. Meanwhile, limits of detection were 0.05 and 0.08 μg mL⁻¹ for MC-LR and MC-YR, respectively. The recoveries for the two MCs were in the range of 95.8-108%. The developed approach had been successfully applied to the analysis of MCs in crude algae samples.     

Analysis of sediment-associated insecticides using ultrasound assisted microwave extraction and gas chromatography-mass spectrometry

An ultrasound assisted microwave extraction (UAME) method was developed to simultaneously extract five organophosphate (OP) and eight pyrethroid insecticides from sediment. The optimized UAME conditions were to use 100 ml of a mixture of hexane and acetone (1:1, v/v) solution as the extraction solvents, and extraction time, microwave and ultrasonic power settings of 6 min, 100 W and 50 W, respectively. Extracts were cleaned using solid phase extraction and analyzed by gas chromatography-mass spectrometry in negative chemical ionization mode and quantification was based on matrix-matched standard solutions along with internal standard calibration. At the spiked concentrations of 1, 5 and 20 ng/g dry weight (dw), recoveries of OPs were 77.6-122%, 65.2-128% and 75.6-141% with relative standard deviations (RSDs) of 10.6-18.1%, 3.1-12.5% and 8.0-35.3%, respectively, while recoveries of pyrethroids were 78.0-101%, 76.4-104% and 71.0-99.5% with RSDs of 10.3-23.5%, 4.7-17.6% and 8.8-18.7%, respectively. Method detection limits ranged from 0.31 to 0.45 ng/g dw for the OP insecticides and from 0.27 to 0.70 ng/g dw for the pyrethroid insecticides. The newly developed UAME method was validated by comparing it to Soxhlet and sonication extraction methods. Better recoveries were achieved for most OPs by the novel UAME method, whereas there was no significant difference in recoveries for most of the pyrethroids. Finally, the UAME method was used to quantify the target insecticides in field-contaminated sediment samples which were collected in Guangzhou, China.