Application of water as a solvent in microwave-assisted extraction for analysis of PCBs and CBzs in fly ash

Polychlorinated biphenyls (PCBs) and chlorobenzenes (CBzs) are two classes of dioxin precursors formed in municipal solid waste incinerators (MSWIs); they produce negative health effects similar to those of dioxins. Reducing the analytical time required for determining the concentrations of these compounds in MSWIs is important for quickly evaluating their importance and assessing associated health risks. In the present study, water is used as a safe and environmentally friendly solvent in microwave-assisted extraction (MAE) for PCB and CBz analyses. MAE is compared with traditional Soxhlet extraction (SE) to determine the extraction efficiencies. The evaluation of extraction efficiencies shows that MAE has a high extraction efficiency compared with that of SE when water content is lower than 60%. Furthermore, the extraction time and organic solvent consumption are reduced with MAE compared with SE.     

羟基铝溶液及铝交联蒙脱土的研究

本文用(27)~Al NMR法和8-羟基喹啉萃取法分别研究了羟基铝溶液中十三聚铝含量的变化规律,还用X-射线衍射法研究了铝交联蒙脱土d_(001)的变化。研究结果表明,铝离子的聚合情况主要由羟铝比决定,而浓度影响不大。随着羟铝比的增加,溶液中单核铝离子含量减少,十三聚铝离子相对含量增加,所得铝交联蒙脱土的d_(001)也随之增大。参照这些变化规律、控制羟基铝溶液的组成,可以制备各种层柱状铝交联蒙脱土复合物。     

高效液相色谱-串联质谱法同时测定表层水体中5类40种抗生素

建立了固相萃取-高效液相色谱-串联质谱（SPE-HPLC-MS/MS）同时检测表层水中5类40种抗生素的分析方法。水样经过滤、固相萃取柱富集净化后，以乙腈-0.2%（v/v）甲酸水溶液为流动相进行梯度洗脱，采用电喷雾电离源，在多反应监测、正离子模式进行定性定量分析。结果显示，40种抗生素在1~200 μg/L水平下线性关系良好，平均加标回收率为41.3%~112.6%。采用该方法对长江南京段表层水体进行检测，共检出13种抗生素，含量为13.4~780.5 ng/L，其中喹诺酮类抗生素恩诺沙星检出率达100%，大环内酯类抗生素克林霉素最高检出水平达739.4 ng/L。该法高效、灵敏、可靠，可用于实际水样中多种抗生素的分析。     

Pressurized hot water extraction of berberine, baicalein and glycyrrhizin in medicinal plants

Pressurized hot water extraction (PHWE) using a laboratory made system was applied for the extraction of thermally labile and reasonably polar components such as berberine in coptidis rhizoma, glycyrrhizin in radix glycyrrhizae/liquorice and baicalein in scutellariae radix. PHWE was carried out dynamically at a flow of 1 ml/min, temperature between 95 and 140 °C, an applied pressure of 10-20 bar and extraction time of 40 min. Extraction by PHWE was found to give efficiencies comparable to Soxhlet extraction for baicalein in scutellariae radix and sonication for berberine in coptidis rhizoma, and glycyrrhizin in radix glycyrrhizae. Effects of ethanol added into the water used in PHWE were explored. Pressurized liquid extraction (PLE) with methanol as solvent was used for extraction of baicalein in scutellariae radix. The marker compounds present in the various medicinal plant extracts were determined by gradient elution HPLC.     

Fluidized-bed extraction of polycyclic aromatic hydrocarbons from contaminated soil samples

Summary Due to the carcinogenity and ubiquity of polycyclic aromatic hydrocarbons in the environment they are of ongoing interest to analytical chemistry. In this study, a comparison of the classic Soxhlet extraction and, fluidized-bed extraction, has been conducted. The extraction of polycyclic aromatic hydrocarbons by this technique has been optimized considering as experimental variables the variation of the number of extraction cycles and the holding time after reaching the heating temperature by means of a surface response design. The significance of the operational parameters of the fluidized-bed extraction on the performance characteristics has been investigated. For the determination of the analytes a selective clean-up of the extracts followed by a fast gas chromatography method with mass spectrometric detection was used, resulting in low limits of detection (0.2 pg μL⁻¹). The accuracy of the complete analytical method was established by extraction and analysis of reference materials.     

High-performance liquid chromatographic determination of Levetiracetam in human plasma: comparison of different sample clean-up procedures

An accurate and precise high-performance liquid chromatographic method using diode array detection for the determination of the novel antiepileptic, Levetiracetam, has been developed. Three clean-up procedures for the analysis of Levetiracetam in human plasma were implemented and evaluated, namely solid-phase extraction, deproteinization by addition of organic solvents and formation of insoluble salts. Adenosine was used as the internal standard for all three sample pretreatment procedures. Among the several cartridges used for solid-phase extraction, the hydrophilic-lypophilic balance (Oasis) HLB) phase provides the best extraction yield of Levetiracetam, together with high precision. With the two other clean-up procedures involving plasma deproteinization by addition of methanol or zinc sulphate, lower sensitivity and precision of the assays were obtained. However, they are cheaper and faster when compared with the solid-phase extraction procedure.     

Trace determination of nitrated polycyclic aromatic hydrocarbons using liquid chromatography with on-line electrochemical reduction and fluorescence detection

An efficient clean-up procedure coupled with a high performance liquid chromatography (HPLC) with on-line electrochemical (EC) reduction and fluorescence detection (FLD) was developed to quantify nitrated polycyclic aromatic hydrocarbons (NPAHs) in the airborne particulate. In this process, NPAHs were extracted ultrasonically followed by analysis by using a reversed phase column with an aqueous eluent containing 70% aqueous acetonitrile and sodium monocholoroacetate as a buffer solution. The extraction efficiencies were above 83% for 1-nitropyrene and 1,3-dinitropyrene (1,3-DNP) 1,6-DNP, and 1,8-DNP, and calibration graphs were linear with very good correlation coefficients (r>0.999) and the detection limits were in the range of 1.0-2.2 pg for dinitropyrenes and nitropyrene. The proposed method provides a relatively simple and convenient procedure for determining the NPAHs samples in airborne particulate.     

PREPARATION OF POLY（METHYL METHACRYLATE）/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly(methyl methacrylate)(LDHs/PMMA)nanocomposite was prepared by in situ solution polymerization of methyl methacrylate(MMA)in the presence of 4-vinylbenzenesulfonate intercalated LDHs(MgAl-VBS LDHs).MgAl-VBS LDHs was prepared by the ion exchange method,and the structure and composition of the MgA1-VBS LDHs were determined by X-ray diffraction(XRD),infrared spectroscopy and elemental analysis.XRD and transmission electron microscopy(TEM)were employed to examine the structure of LDHs/PMMA nanocomposite.It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix.The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.     

Analytical procedures for quantification of peptides in pharmaceutical research by liquid chromatography–mass spectrometry

Peptide quantification by liquid chromatography–mass spectrometry (LC–MS) combines the high resolving power of reversed-phase (RP) chromatography with the excellent selectivity and sensitivity of mass spectrometric detection. On the basis of comprehensive practical experience in the analysis of small molecules, pharmaceutical research is developing technologies for analysis of a growing number of peptidic drug candidates. This article is a detailed review of procedures based on LC–MS techniques for quantitative determination of peptides. With the focus on pharmaceutical applications several technologies for sample preparation, various aspects of peptide chromatography, important characteristics of ESI–MS, selectivity of MS-detection modes, the large variability of internal standards, and modern instrumentation are discussed. The demand for reliable, robust, sensitive, and accurate methods is discussed using numerous examples from the literature, complemented by experiments and results from our laboratory.     

Spectrophotometry Determination of Cobalt after Extraction of its Ternary Complex with 3-(4-Phenyl-2-Pyridyl)-5,6-Diphenyl-1,2,4-Triazine and Tetraphenylborate into Molten Naphthalene

The reaction of 3-(4-phenyl-2-pyridyl)-5,6-diphenyl-1,2,4-triazine (PPDT) and tetraphenylborate (TPB) with cobalt (II) has been studied to determine the optimum conditions for the extraction and quantitative spectrophotometry determination of this metal. The ternary complex is extracted into molten naphthalene at pH 3.6–7.4. The solid naphthalene containing the cobalt associated complex is separated by filtration and dissolved in acetonitrile. Beer's law is obeyed in the concentration range 8–140 μg cobalt in 10 ml of acetonitrile solution. The molar absorptivity and sensitivity are 4.2×10³ l·mol^?1·cm^?1 and 0.01408 μg/cm², respectively. The other factors such as pH, amounts of reagents and naphthalene, shaking and standing times, and the effect of diverse ions are studied. The method has been applied to the determination of cobalt in iron steel alloys.