聚合物气体辅助注射成型制品的形态结构

作为一种由常规注射成型发展起来的聚合物加工技术,气体辅助注射成型具有节约原材料、缩短成型周期以及提高制品性能等优点,已得到广泛的应用.由于气辅成型过程是一个在刚、柔双重约束界面条件下进行的多相复杂体系的多次流动过程,因而其形态结构的形成、发展和演化要远比常规注塑成型复杂.然而在气辅成型的形态结构方面,国内外的研究一直以来开展得较少.近年来,作者在聚合物及其共混物、复合材料气辅成型制品的形态结构方面已开展了广泛的研究工作,本文对这些工作和一些重要结果作了总结,并简要分析了成型过程中剪切场对形态演化的影响,最后对该研究方向的发展趋势作了展望.     

HIGH-FREQUENCY VIBRATIONS OF CORRUGATED CYLINDRICAL PIEZOELECTRIC SHELLS

Coupled extensional and flexural cylindrical vibrations of a corrugated cylindrical piezoelectric shell consisting of multiple pieces of circular cylindrical surfaces smoothly connected along their generatrix are studied. To validate the results for the case of relatively thick shells or equivalently high-frequency modes with short wavelengths, existing analysis is extended by considering shear deformation and rotatory inertia. An analytical solution is obtained. Based on the solution, resonant frequencies and mode shapes are calculated.     

综合微光测试系统的总体设计

描述一种微光像增强器综合测试系统的总体设计。设计采用了组合结构，使系统只用单一的光源就可以测试微光像增强器九项光量子类和几何类的参数，具有以往几台常规测试仪器功能的总和。系统对各参数测量的不确定度２～４％。     

A Simple Hydrothermal Method for the Growth of ZnO Crystals

ZnO microstructures have been grown from zinc chloride (ZnCl₂) and ammonia solution at 100 °C for 1 – 24 hours. X‐ray diffraction, scanning electron microscope and field‐emission scanning microscope were utilized to investigate the structural properties and morphology of the ZnO crystals. Structural investigations show that phase‐pure hexagonal structure ZnO has been successfully synthesized, and the hexagonal structure ZnO can be achieved in solutions with an appropriate range of concentrations. Under our experimental conditions, several different morphologies of ZnO structures were obtained, including flower‐like and bar flower‐like. The relationship between the morphology and experimental conditions are discussed.     

一种新型的高功率高频率同轴渡越时间振荡器

提出了一种高频率和高功率的渡越时间振荡器,并且对其进行了理论和数值研究。这种振荡器采用同轴结构,功率容量大,不需要外加引导磁场聚焦电子束,波束相互作用区短,保持了传统渡越时间振荡器在结构上的简单性和输出信号的稳定性;运用电压为225kV和电流为11kA的电子束进行模拟,在X波段获得了峰值功率为1.4GW,频率为8.335GHz的微波输出。     

过模慢波结构频率反射特性及谐振腔的影响

利用有限元方法求解:S-参数矩阵,研究了过模慢波结构对圆波导TM01,TM02模的反射特性,分析了在慢波结构末端加入谐振腔后,由于两端口的不对称性而造成的对反射特性影响。结果表明,在TM01的π模频率附近,慢波结构和谐振腔组成的系统对无谐振腔一侧端口入射TM01模的反射增大,而对有谐振腔一侧端口入射TM01模的反射减小。根据计算结果,解释了普通多波切伦柯夫振荡器所用慢波结构周期数较多的原因,说明了在多波切伦柯夫振荡器中引入谐振腔后,不但可以减少所用慢波结构周期数,而且有利于提高微波输出效率。     

创新导向减税与就业结构升级—基于研发费用加计扣除的检验

创新在中国经济社会发展中的作用愈发突出,如何促进高技能劳动力向创新主体部门集聚,值得深入探索。基于2018年企业所得税研发费用加计扣除比例提升冲击,利用A股上市公司2016−2019年数据,本文研究了创新导向减税对就业结构的影响。研究发现,加计扣除比例提升显著提高了企业雇佣劳动力中研究生所占比例,促进了企业创新人力资本积累。异质性分析显示,政策在非公有制企业、主板上市企业中效果更明显。对企业各层次雇佣规模的评估表明,雇佣总量及研究生、本科生雇佣数均有所提高,同时本科以下学历人员并未明显减少,这意味着政策未产生明显的挤出效应,高技能劳动力雇佣的增加并不以低技能劳动力的减少为代价。综合来看,政策不但能促进企业加大研发投入,还有助于提高全要素生产率和盈利水平。本文结论为通过实施结构性减税,推动创新驱动发展提供了经验支撑。     

单层2H-MoTe2光电效应的理论研究

材料的禁带宽度是影响光电探测器探测范围的重要因素.单层2H-MoTe2因具有合适的禁带宽度引起了科研人员广泛的研究兴趣.本文基于非平衡态格林函数-密度泛函理论,采用第一性原理方法,研究了单层2H-MoTe2的光电效应.结果表明:在线性偏振光照射下,MoTe2产生的光电流函数与唯象理论相吻合;在光子能量范围1.6～1.8...     

Improved Synthesis and Structure of 3-Carboxy-2-pyrazinecarbohydroxamic Acid

3-Carboxy-2-pyrazinehydroxamic acid was prepared by a one pot reaction starting from pyrazine-2,3-dicarboxylic anhydride with a high yield, and characterized by IR, Mass spectrum, 1H NMR and 13C NMR spectra and single-crystal X-ray diffraction. It crystallizes in triclinic, space group Pī with a=4.8659(10), b=7.4233(15), c=11.602(2), α=96.904(2), β=92.422(3), γ=107.454(2)°, V=395.51(14)3 , Z=2, Dc=1.689g/cm3 , F(000)=208, μ(MoKα)=0.149 mm-1 , the final R=0.0473 and wR=0.1306 for 2853 observed reflections (I>2σ (I)). A three-dimensional framework was assembled through intermolecular hydrogen bonding between water and 3-carboxy-2-pyrazine-carbohydroxamic acid molecules.