Hollow-fiber flow/hyperlayer field-flow fractionation for the size characterization of airborne particle fractions obtained by SPLITT fractionation

Hollow-fiber flow field-flow fractionation (HF FlFFF) was applied for the separation and size characterization of airborne particles which were collected in a municipal area and prefractionated into four different-diameter intervals >5.0, 2.5-5.0, 1.5-2.5, <1.5 microm) by continuous split-flow thin (SPLIIT) fractionation. Experiments demonstrated the possibility of utilizing a hollow-fiber module for the high-performance separation of supramicron-sized airborne particles at steric/hyperlayer operating mode of HF FlFFF. Eluting particles during HF FlFFF separation were collected at short time intervals (approximately 10 s) for the microscopic examination. It showed that particle size and size distributions of all SPLITT fractions of airborne particles can be readily obtained using a calibration and that HF FlFFF can be utilized for the size confirmation of the sorted particle fraction during SPLITT fractionation.     

Research on the propagation properties of hollow laser beams with three-dimensional trap optical distribution

A new kind of hollow beams - hollow laser beams with three-dimension trap optical distribution - was put forward. With the help of the Collins formula in paraxial optical system, the analytical equation of propagation and transformation of the hollow laser beams was deduced. According to the analytical equation, the propagation properties of the kind of hollow beams that transform in free space were simulated. In the experiment, we obtained the hollow laser beams by means of the combinational optical system of reflecting positive-axis and negative-axis pyramids. The intensity of the vertical loop in different distances was tested, which shows that the analytical equation of propagation and transformation is in agreement with the result.     

A one-pot method to prepare N-doped titania hollow spheres with high photocatalytic activity under visible light

N-doped titania hollow spheres (NTHS) were prepared by a one-pot hydrothermal method using urea as precursor of nitrogen. The prepared hollow spheres were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS) and UV-vis diffuse reflectance spectrum (DRS). The photocatalytic activity of as-prepared titania hollow spheres was determined by degradation of Reactive Brilliant Red dye X-3B (C.I. reactive red 2) under visible light irradiation, and was compared to non-doped titania hollow spheres and commercial P25 titania. Results indicated that the as-prepared NTHS showed highest photocatalytic activity.     

Analytical solution for electromagnetothermoelastic behaviors of a functionally graded piezoelectric hollow cylinder

Analytical study for electromagnetothermoelastic behaviors of a hollow cylinder composed of functionally graded piezoelectric material (FGPM), placed in a uniform magnetic field, subjected to electric, thermal and mechanical loads are presented. For the case that the electric, magnetic, thermal and mechanical properties of the material obey an identical power law in the radial direction, exact solutions for electric displacement, stresses, electric potential and perturbation of magnetic field vector in the FGPM hollow cylinder are determined by using the infinitesimal theory of electromagnetothermoelasticity. Some useful discussions and numerical examples are presented to show the significant influence of material inhomogeneity, and adopting a certain value of the inhomogeneity parameter β and applying suitable electric, thermal and mechanical loads can optimize the FGPM hollow cylindrical structures. This will be of particular importance in modern engineering design.     

Optogalvanic Indication of Small Continuous Spectrum Distribution Shift

An optogalvanic method based on the shift of the continuous spectrum frequency distribution is proposed. The accuracy of the shift indication depends on the frequency distribution of the absorbing transitions in the optogalvanic detector spectrum. The absorption in Ne/Cu hollow cathode discharge lamp is analysed in order to investigate the behaviour of the spectrum emitted by a red AC EL panel.     

Applicability of Spectroscopic Methods to the Determination of Aluminium in Biological Samples

A comparative investigation was carried out of the suitability of atomic absorption spectrometry and of emission spectrography with hollow cathode and arc excitation sources for determination of aluminium in biological samples. The three methods give reliable results. Hollow cathode emission spectrography was found to be influenced to a lesser extent by matrix effects than the other two techniques. On the other hand atomic absorption spectrometry presents some remarkable advantages insofar rapidity of analysis and detection limits are concerned.     

The Electronic and Infrared Absorption Spectra of Toluene-d

Abstract

The infrared and ultraviolet absorption spectra of toluene-d have been investigated for the first time in the regions 400 - 4000 cm^?1 and 2350 ?2750 A° respectively. The intense band at 2666.3 A°(37494 cm^?1) in the u.v. vapour absorption spectrum has been identified as the o,o band and others have been interpreted in terms of the three (519,632 and 785 cm^?1) ground state and the six (454,526,743,935,963 and 1180 cm^?1 excited state fundamentals. The correlation of the various frequencies of the ground and excited states of toluene and toluene-d has been done. The observed isotopic shift for toluene-d is 14 cm^?1.     

多形貌中空介孔SiO2的可控合成及复合物对Cu2+的吸附还原

以间苯二酚/甲醛(RF)树脂为软模板, 正硅酸乙酯(TEOS)为硅源, 十六烷基三甲基溴化铵(CTAB)为制孔剂, 采用一锅溶胶-凝胶法制备了多形貌中空介孔二氧化硅微球(HMSM). 通过改变甲醛用量调控软模板RF树脂的结构, 可以获得一系列不同形貌及结构的HMSM, 随着甲醛用量的增加, HMSM结构表现为单层壳空心球、 蛋黄壳空心球、 双层壳空心球等结构. 其中具有蛋黄壳空心球结构的HMSM比表面积可达691 m ²/g, 孔体积达2.23 cm ³/g, 孔径均匀(3.5 nm). 以硝酸铈铵为引发剂, 在具有蛋黄壳空心球结构的HMSM中引发丙烯腈自由基聚合, 并将支链聚丙烯腈上的氰基偕胺肟化, 制得HMSM接枝聚偕胺肟(HMSM-g-PAO). 以100 mg/L的CuCl₂溶液为目标溶液, 在pH=4.0时测试合成的HMSM-g-PAO对Cu ²⁺的吸附效果, 发现吸附平衡时Cu ²⁺吸附量达134 mg/g.     

温度对碳球形貌及超级电容性能的影响

以三氯乙烷和二氯乙烷为原料, 金属钠为还原剂, 在溶剂热条件(100~150 ℃)下使氯代乙烷中的碳氯键和碳氢键发生断裂制备了碳纳米球, 并对制备的碳纳米球进行了表征. X射线衍射结果表明, 样品为类石墨结构, 衍射信号宽且弱, 表明样品的结晶性较差; 拉曼光谱分析结果也表明样品具有较高的无序度. 样品的SEM与TEM分析结果表明, 在较高的反应温度下, 碳球具有更好的单分散性, 碳球的粒径随温度的升高而增大; 选区电子衍射结果表明碳球内部为无定形的类石墨结构. 以碳纳米球为负极材料的锂离子电池测试结果表明, 50周循环后比容量为941 mA·h/g, 库仑效率接近100%, 放电容量保持率为103.7%, 具有良好的循环稳定性. 测试了不同温度下制备样品的超级电容器性能, 发现120 ℃下制备的碳纳米球具有较高的比电容和较低的内阻值, 比电容高达130 F/g, 经过1000周循环充放电后比电容衰减比例低于14%, 具有较高的稳定性.     

A novel approach to produce monodisperse hollow pure silica spheres

In this work, we report an efficient method to produce pure hollow silica spheres (HSS) using phenyltrimethoxysilane (PTMS) compound. The production of HSS was carried out via hydrolysis of PTMS in the aqueous media and followed by a condensation reaction to form silica spheres with phenyl groups. The product was then calcined to remove phenyl groups and obtain pure silica spheres with >95% fine structure. The chemical nature of pure silica was confirmed by Fourier transforms infrared spectroscopy. The calcined HSS were stable beyond the temperature of 900 °C as confirmed by thermal gravimetric analysis (TGA). The calcined spheres preserved their spherical appearance and hollow core as shown by SEM and TEM micrographs. Interestingly, the average size of the spheres was reduced significantly after calcination from 760 to 510 nm, confirming further the removal of phenyl groups. The calcined HSS offered much higher surface area (A_s) when analysed by BET; A_s for calcined product was ～406 and mere ～4.8 m²/g for uncalcined HSS. Finally, drug release study of cisplatin/HSS showed over 45% of steady cumulative release for 72 h. The prepared HSS can be dispersed in water opening the possibility of many novel bio/non-bio applications.