Affinity adsorption of recombinant human interferon-α on a porous dye-affinity adsorbent

Interferons are potent biologically active proteins synthesized and secreted by somatic cells of all mammalian species. Dye-affinity adsorption is increasingly used for protein separation. Hollow fibers have several advantages as adsorbents in comparison to conventional bead supports because they are not compressible and they eliminate internal diffusion limitations. The aim of this study was to explore in detail the performance of polyamide hollow fibers to which Cibacron Blue F3GA was attached for adsorption of recombinant interferon-α (rHuIFN-α). The hollow fiber was characterized by scanning electron microscopy. These dye-carrying hollow fibers (35.8 μmol/g) were used in the rHuIFN-α adsorption-elution studies. The effects of initial concentration of rHuIFN-α, medium pH, ionic strength and temperature on the adsorption efficiency of dye-attached hollow fibers were studied in a batch system. The non-specific adsorption of rHuIFN-α on the hollow fibers was 1.2 mg/g. Cibacron Blue F3GA attachment significantly increased the rHuIFN-α adsorption up to 99.8 mg/g. Significant amount of the adsorbed rHuIFN-α (up to 94.8%) was eluted in 1 h in the elution medium containing 1.0 M NaCl. In order to determine the effects of adsorption conditions on possible conformational changes of rHuIFN-α structure, fluorescence spectrophotometry was employed. We resulted that dye-affinity hollow fibers can be applied for rHuIFN-α adsorption without causing any significant conformational changes. Repeated adsorption/elution processes showed that these dye-attached hollow fibers are suitable for rHuIFN-α adsorption.     

Hollow fiber liquid phase microextraction as a preconcentration and clean-up step after pressurized hot water extraction for the determination of non-steroidal anti-inflammatory drugs in sewage sludge

A method for the quantitative determination of non-steroidal anti-inflammatory drugs (NSAIDs) in sewage sludge was developed and validated. The target compounds were extracted using pressurized hot water extraction (PHWE) and then purified and preconcentrated by three-phase hollow fiber liquid phase microextraction (HF-LPME) followed by LC–ESI-MS analysis. The PHWE was optimized with regard to the pH of solvent as well as other operational parameters. The optimum conditions were 0.01 M NaOH as the extraction solvent, temperature of 120 °C, pressure of 100 bar, static time 5 min, 5 cycles, flush volume 90% and purge time 60 s. Spike recoveries for sludge samples spiked at 200 ng g⁻¹ were in the range of 101–109% but for the native drugs in non-spiked sludge samples, recoveries were 38.9%, 59.8%, 90.3% and 47.8% for ketoprofen, naproxen, diclofenac and ibuprofen, respectively. Donor phase pH, ionic strength and extraction time were optimized for HF-LPME after PHWE. The optimum conditions were 2 h extraction at pH 1.5 without salt addition. Enrichment factors in the range of 947–1213 times were achieved (extraction recoveries were 23.6–30.3%) for HF-LPME after PHWE. The matrix effect on the ionization of drugs in LC–ESI-MS was also investigated. The results show that there is a smaller matrix effect (−8.9% to +14.6%) in comparison with other published values obtained using solid phase extraction (SPE) for clean-up after pressurized liquid extraction (PLE). Method detection limits (MDLs) and method quantification limits (MQLs) for different drugs were in the range of 0.4–3.7 ng g⁻¹ and 1.5–12.2 ng g⁻¹ in dried sludge samples, respectively. The characteristics of the proposed method were compared with those of other published works. The considerably lower ion suppression/enhancement and minimum use of organic solvents (a few microliters of di-n-hexyl ether) in the sample preparation step are two highlighted advantages of the proposed method in comparison with previously published works. The method was applied to determine NSAIDs in sewage sludge from Källby wastewater treatment plant (Lund, Sweden) in April, June, August and October 2010. The highest concentration level was recorded for ibuprofen in the April sewage sludge sample (588 ng g⁻¹) and all of the selected NSAIDs were detected in all the samples analyzed.     

CoO纳米颗粒/石墨烯纳米纤维复合材料的制备及电化学性能

用石墨烯和Co(CH₃COO)₂·4H₂O作为原料,利用超声辅助法合成了锂离子电池的负极材料CoO纳米颗粒/中空石墨烯纳米纤维复合物.采用X射线衍射(XRD)确定材料的物相组成,采用扫描电子显微镜(SEM)和透射电子显微镜(TEM)观察材料的表面形貌和微观结构,采用X射线光电子能谱(XPS)确定材料的价态结构.采用循环伏安、恒电流充放电和交流阻抗谱表征材料的电化学性能.结果显示,在100 mA/g的电流密度下,循环了160次后,可逆容量仍超过800 mA/g,库仑效率保持在99%以上.该材料优异的电化学性能主要归因于石墨烯的中空纤维结构,中空内部可以容纳电解液,能直接将离子输送到颗粒表面,实现了离子的快速传输;二维中空纤维搭建成三维网络结构,实现了三维电子传导网络.     

Selective separation of trace nickel(II) and gold(I) ions via hollow fiber supported liquid membrane enhanced by synergistic extractants D2EHPA/TBP

This work presents the selective and simultaneous separation of nickel (Ni²⁺) and gold ([Au(CN)₂]⁻) ions, in trace amounts, from alkaline solution via hollow fiber supported liquid membrane (HFSLM) technique. HFSLM is challengingly carried out in real rinse wastewater generated by the ENIG plating process. The influence of various chemical parameters, including the type of extractant and their concentrations, molar ratios of mixed extractant as well as type of strippant, are also studied. The organophosphorus extractant mixtures of D2EHPA and TBP provide a synergistic effect for target Ni²⁺ ions but has an antagonistic effect as regards the extraction of non-target [Au(CN)₂]⁻ ions. Compared to other inorganic acids, HCl is seen to be the most suitable strippant for the selective stripping. Results demonstrate that percentages of extraction and stripping of Ni²⁺ ions achieved 85.7 and 83.2%, respectively. In contrast, percentages of extraction and stripping of non-target [Au(CN)₂]⁻ ions attained 15.6 and 1.94%.     

Microwave absorption properties of composite powders with low density

The composites of barium ferrite coated on hollow ceramic microspheres were prepared using sol-gel technique. The crystal structure, morphology and microwave absorption properties of composite powders with different weight ratio of microspheres were studied with XRD, EDS, FESEM and vector network analyzer. The results show that the microwave absorption properties of composite powders are greatly improved. The maximum microwave loss of composite powders reaches 31 dB with an amount of 50 wt.% microspheres, and its density is only about 1.80 g/cm³. The effect of hollow ceramic microspheres on the microwave absorption property is also discussed.     

Synthesis of hollow spherical silica with MCM-41 mesoporous structure

Hollow spherical mesoporous silica was synthesized by using sodium silicate as a precursor and a low concentration of cetyltrimethylammonium bromide (CTAB) (0.154 mol dm^–3). The resulting hollow spherical particles were characterized with scanning electron microcopy (SEM), small-angle X-ray diffraction (SXRD), transmission electron microscopy (TEM), and N₂ gas adsorption and desorption techniques. The results showed that regular spherical mesoporous silica could be obtained only if the molar ratio of propanol to CTAB was in the range of approximately 8:1–9:1. The spherical particles were hollow (inside), and the shell consisted of smaller particles with a pore structure of hexagonal symmetry. With an increase of the molar ratio of propanol to CTAB, the distance (a value) between centers of two adjacent pores increased, and the pore structure of mesoporous silica became less ordered. N₂ adsorption–desorption curves revealed type IV isotherms and H1 hysteresis loops; with an increase of the molar ratio of propanol to CTAB, the pore size with Barrett–Joyner–Halenda (BJH) diameter of the most probable distribution decreased, but the half peak width of the pore size distribution peak increased     

多层次炭结构对膨胀阻燃聚丙烯性能的调控作用研究

将具有封闭空心结构的酚醛微球(HPMs)引入到聚丙烯/膨胀阻燃剂(PP/IFR)体系,燃烧时一方面依托PP/IFR形成膨胀多孔炭,另一方面通过HPMs形成空心炭微球,嵌入到前面多孔炭的骨架中,形成具有多层次孔的炭结构,从而调控膨胀炭层,进而调节材料的阻燃性能.通过极限氧指数(LOI)、垂直燃烧(UL-94)等研究了材料的阻燃性能;通过热失重分析(TGA)测试其热稳定性;采用红外热成像仪监测燃烧过程材料的表面温度,用扫描电镜(SEM)观察IFR、HPMs在基体中的分散行为及炭层结构.结果表明,少量HPMs在聚合物中分散得比较均匀.HPMs调控了膨胀炭层,使PP/IFR形成了表层炭致密,内层具有多层次孔的炭结构.这种优质的炭结构可以使样品表面温度迅速降低,从而有效提高PP/IFR体系的阻燃效率,使得PP在添加18 wt%IFR和1 wt%HPMs就可以通过UL-94 V0级别.     

Determination of aromatic amines in environmental water sample by hollow fiber-liquid phase microextraction and microemulsion electrokinetic chromatography

A novel method of microemulsion electrokinetic chromatography (MEEKC) coupled with hollow fiber-liquid phase microextraction (HF-LPME) was developed for determination of six aromatic amines including 4-methylaniline, 3-nitroaniline, 2,4-dimethylaniline, 4-chloroaniline, 3,4-dichloraniline and 4-aminobiphenyl. Baseline separation of six aromatic amines was achieved within 8 min by using the microemulsion buffer containing a 10 mM borate buffer at pH 9.0, 0.8% (v/v) ethyl acetate as oil droplets, 60 mM sodium cholate as surfactant, 5.0% (v/v) 1-butanol as co-surfactant. The influence factors relevant to the HF-LPME process were systemically investigated. The obtained enrichment factors were ranged between 70 and 157 in a 30 min extraction time, and the limits of detection ranged between 0.0021 and 0.0048 μg/mL. This purposed method was successfully applied for the analysis of aromatic amines in water sample and the recoveries were ranged from 87.2% to 99.8%.     

导电聚间甲基苯胺空心微球的制备及表征

在无任何掺杂酸的条件下,以过硫酸铵(APS)既为氧化剂、又为掺杂剂,采用无模板(template-free)自组装的方法制备了导电聚间甲基苯胺(PMT)空心微球.该空心微球的平均直径约为2μm,壳的厚度约为140nm.研究表明PMT空心微球是以球状的间甲苯胺胶束为软模板(soft-template)经过自组装过程而形成的.借助FTIR、UV-Vis和XRD等结构表征证实自组装的空心微球为导电态的聚间甲基苯胺.     

空心阴极灯激发的微波等离子体炬原子/离子荧光光谱研究--钙的原子/离子荧光光谱

用强短脉冲供电技术的空心阴极灯作激发源、微波等离子体炬作原子／离子化器，建立了原子／离子荧光光谱实验装置。详细研究了微波等离子体功率、观察高度、空心阴极灯电流等因素对原子／离子荧光信号强度的影响，测量了系统对Ca的原子／离子荧光光谱的检出限。