Curved Ferroelectric Liquid Crystal Matrix Displays Driven by Field-Sequential-Color and Active-Matrix Techniques

This paper describes a curved field-sequential-color matrix display using fast-response ferroelectric liquid crystal. Black matrix and transparent electrode patterns were formed on a thin plastic substrate by a transfer method from a glass substrate. While a composite film of liquid crystal and micro-polymers of walls and fibers was formed between the flexible substrates by printing, laminating and curing processes of a solution of monomers and liquid crystal, the mechanical stability was enhanced by use of multi-functional monomers to form large display panels. The image pixels of the matrix panel were driven by an active matrix scheme using an external switch transistor array at a frequency of 180 Hz for intermittent three-primary-color backlight illumination. The flexible A4-paper-sized color display with 24 × 16 pixels and 60 Hz field frequency was demonstrated by illuminating it with sequential three-primary-color lights from light-emitting diodes of the backlight. Our display system is useful in various information displays because of its freedom of setting and location.     

Microwave absorption properties of composite powders with low density

The composites of barium ferrite coated on hollow ceramic microspheres were prepared using sol-gel technique. The crystal structure, morphology and microwave absorption properties of composite powders with different weight ratio of microspheres were studied with XRD, EDS, FESEM and vector network analyzer. The results show that the microwave absorption properties of composite powders are greatly improved. The maximum microwave loss of composite powders reaches 31 dB with an amount of 50 wt.% microspheres, and its density is only about 1.80 g/cm³. The effect of hollow ceramic microspheres on the microwave absorption property is also discussed.     

改善液晶光阀投影光学系统偏振特性的理论设计方法

定量分析了液晶光阀投影光学系统中影响系统对比度的主要因素，利用矢量方法建立三维空间数学模型对光线进行追迹，并利用琼斯矩阵和矢量光学的原理分析了偏振器件--主要是波片--和各种光学薄膜对光学系统性能的影响。给出了在一定假设条件下的对没有波片的光学系统和插入波征后的光学系统的仿真计算结果。两组数据比较表明在光路中插入合适相位差的波片可以显著提高系统对比度等性能。     

Determination of ultra-trace gold in natural water by graphite furnace atomic absorption spectrophotometry after in situ enrichment with thiol cotton fiber

A simple method of determining ultra-trace Au in natural water was presented by using graphite furnace atomic absorption spectrophotometry (GFAAS) after in situ enrichment with thiol cotton fiber (TCF). The sample solution was adjusted to pH 1.5-2.0 with HCl, then the water sample was passed through a column packed with 0.10-0.20 g TCF and the flow rate was controlled at 20-40 ml min⁻¹. The effects of interferences, such as complexing and oxidizing agents and other elements adsorbed on TCF were overcome by chemical treatments prior to the desorption of Au. The adsorbed Au was adsorbed with 2.0 ml hot acid, then it was extracted with 1.00 ml methyl isobutylketone (MIBK). For a 5 l water sample, the detection limit of Au is 0.02 ng l⁻¹. The relative standard deviation (R.S.D.) for the determination of 1.44 ng l⁻¹ Au was 9.4%.The method was applied to determine ultra-trace Au both in suspended phase and soluble phase in natural water, the concentrations of total Au in natural water samples range from 0.51 to 67.82 ng l⁻¹. The recovery of added 0.50-6.00 ng l⁻¹ Au was 80-95%. The method is useful in prospecting for Au deposits by means of hydrogeochemical methods. The enrichment is carried out in the field, and then the determination of Au is completed later in the laboratory.     

Influence of the Interaction between Two Neighboring Periodically Curved Fibers on the Stress Distribution in a Composite Material

A method is developed for a stress analysis in an infinite elastic body containing two neighboring periodically cophasaly curved fibers located along two parallel lines. The stress distribution is studied when the body is loaded at infinity by uniformly distributed normal forces in the fiber direction. The investigation is carried out within the framework of a piecewise homogeneous body model with the use of exact three-dimensional equations of elasticity theory. Numerical results related to the stress distribution considered and the influence of interaction between the fibers on this distribution are given.     

Numerical Modeling of Solitons in a Low Birefringent Optical Fiber

A numerical investigation, based on the split-step Fourier transform algorithm of all optical switching of solitons in a low birefringent optical fiber is presented. The numerical algorithm is described in detail. This revised version was published online in August 2006 with corrections to the Cover Date.     

Rugged distal tips for CO2 laser medicine

Low-loss and rugged distal tips for CO₂ laser have been proposed and fabricated based on a commercially available stainless steel (St) pipe. A method of smoothening the inner surface of the St pipe with a rough inner surface is put forward. Fabrication parameters, transmission properties, and mechanical strength of the cyclic olefin polymer-coated silver hollow St distal tip are experimentally discussed.     

利用模式的对称性研究光子晶体光纤的色散

由光子晶体光纤的对称性可以得到模式分布的对称性，根据模式的对称性选择适当的展开函数，可以使计算量大大减少。计算了六角结构光子晶体光纤的色散特性，得到了波长在1．55pm处色散为零时，光子晶体光纤的结构参量所满足的方程。     

斐索梯度折射率光纤透镜传感实验

采用LD泵浦的单纵模Nd：YVO4倍频激光器、梯度折射率光纤透镜等器件构成斐索梯度折射率光纤透镜传感实验仪．本文介绍了实验装置和实验原理，并给出了实验结果。