Stereoselective Synthesis of Allylic Amines by One-Pot Tandem Reaction of Acetylenic Sulfone,Grignard Reagent,and N-Tosylimine

Polysubstituted allylic amines were regio- and stereoselectively synthesized by a one-pot tandem reaction of Cu(I)-catalyzed carbomagnesiation of acetylenic sulfones and its further reaction with N-tosylimine.     

Synthesis of Functionalized Pyrroles by Reaction of 3,4‐Diacetylhexane‐2,5‐dione with Primary Amines in Water

3,4‐Diacetylhexane‐2,5‐dione (tetra‐acetylethane) undergoes a complex reaction with primary amines in boiling water to produce N‐alkyl‐3‐acetyl‐2,5‐dimethylpyrroles, together with small quantities of N‐alkyl‐3,4‐diacetyl‐2,5‐dimethylpyrroles and 2,5‐dimethyl‐1H‐pyrrol‐3‐yl‐vinyl‐acetamides. When the reaction was carried out in methanol at room temperature, the yields of the latter products increased.     

Improvement in Uranium Adsorption Properties of Amidoxime-Based Adsorbent Through Cografting of Amine Group

Amidoxime (AO)/amine co-functionalized polypropylene fiber adsorbents were prepared. The all-polymeric structures were characterized by using Fourier transform infrared spectroscopy (FTIR), optical microscope, contact angle meter and electron spin resonance (ESR) analysis methods, confirming the grafting, modification, and amidoximation stages gravimetrically, spectroscopically, and visually. The properties for the removal of uranyl(VI) from aqueous solutions were investigated. For amidoxime (AO) fiber, high adsorption rate was observed within the first 30 minutes and the plateau value of 40.6% uranium loading (0.0812 mg/g) was reached at around 30 minutes. The adsorption equilibrium for AO/amine fiber was attained within 20 minutes, resulting in the adsorption of 92.6% uranium loading (0.185 mg/g). The percentage of adsorption increases with increasing pH value (2–6), reaches a maximum at pH 6.0 and then remains almost constant for AO/amine fiber, whereas reduces slightly for AO fiber.     

Polymer colloids formed by polyelectrolyte complexation of vinyl polymers and polysaccharides in aqueous solution

The polyelectrolyte complex formed from the polyanion and polycation was studied by turbidimetry, static and electrophoretic light scattering, and elementary analysis. Sodium salts of polyacrylate (PA) and heparin (Hep) were chosen as the polyanion, and hydrochloric salts of poly(vinyl amine) (PVA) and chitosan (Chts) as the polycation. Although these vinyl polymers and polysaccharides have remarkably different backbone chemical structures and linear charge densities, all the four combinations PA-PVA, PA-Chts, Hep-PVA, and Hep-Chts provide almost stoichiometric polyelectrolyte complexes which are slightly charged owing to the adsorption of the excess polyelectrolyte component onto the neutral complex. The charges stabilize the complex colloids in aqueous solution of a non-stoichiometric mixture, and the aggregation number of the complex colloids increases with approaching to the stoichiometric mixing ratio. The mixing ratio dependence of the aggregation number for the four complexes is explained by the model proposed in the previous study.     

In Situ Facile Synthesis of Ru‐Based Core–Shell Nanoparticles Supported on Carbon Black and Their High Catalytic Activity in the Dehydrogenation of Amine‐Boranes

Well‐dispersed core–shell Ru@M (M=Co, Ni, Fe) nanoparticles (NPs) supported on carbon black have been synthesized via a facile in situ one‐step procedure under ambient condition. Core‐shell Ru@Co NPs were synthesized and characterized for the first time. The as‐synthesized Ru@Co and Ru@Ni NPs exhibit superior catalytic activity in the hydrolysis of ammonia borane compared with their monometallic and alloy counterparts. The Ru@Co/C NPs are the most reactive, with a turnover frequency (TOF) value of 320 (mol min^?1) mol_Ru^?1 and activation energy (E_a) of 21.16 kJ mol^?1. Ru@Ni/C NPs are the next most active, whereas Ru@Fe/C NPs are almost inactive. Additionally, the as‐synthesized NPs supported on carbon black exhibit higher catalytic activity than catalysts on other conventional supports, such as SiO₂ and γ‐Al₂O₃.     

Counter‐anion role in the formation of two supramolecular complexes: [Ag2(DPP)2](ClO4)2·CH3CN and [Ag2(DPP)2(NO3)2] {DPP is N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine}

The title compounds, bis{μ‐N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine‐κ²N¹:P}disilver bis(perchlorate) acetonitrile monosolvate, [Ag₂(C₁₈H₁₇N₂P)₂](ClO₄)₂·CH₃CN, (1), and bis{μ‐N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine‐κ²N¹:P}bis[(nitrato‐κ²O,O)silver], [Ag₂(C₁₈H₁₇N₂P)₂(NO₃)₂], (2), each contain disilver macrocyclic [Ag₂(C₁₈H₁₇N₂P)₂]²⁺ cations lying about inversion centres. The cations are constructed by two N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine (DPP) ligands linking two Ag⁺ cations in a head‐to‐tail fashion. In (1), the unique Ag⁺ cation has a near‐linear coordination geometry consisting of one pyridine N atom and one P atom from two different DPP ligands. Two ClO₄⁻ anions doubly bridge two metallomacrocycles through Ag...O and N—H...O weak interactions to form a chain extending in the c direction. The half‐occupancy acetonitrile molecule lies with its methyl C atom on a twofold axis and makes a weak N...Ag contact. In (2), there are two independent [Ag(C₁₈H₁₇N₂P)]⁺ cations. The nitrate anions weakly chelate to each Ag⁺ cation, leading to each Ag⁺ cation having a distorted tetrahedral coordination geometry consisting of one pyridine N atom and one P atom from two different DPP ligands, and two chelating nitrate O atoms. Each dinuclear [Ag₂(C₁₈H₁₇N₂P)₂(NO₃)₂] molecule acts as a four‐node to bridge four adjacent equivalent molecules through N—H...O interactions, forming a two‐dimensional sheet parallel to the bc plane. Each sheet contains dinuclear molecules involving just Ag1 or Ag2 and these two types of sheet are stacked in an alternating fashion. The sheets containing Ag1 all lie near x = , , etc, while those containing Ag2 all lie near x = 0, 1, 2 etc. Thus, the two independent sheets are arranged in an alternating sequence at x = 0, , 1, etc. These two different supramolecular structures result from the different geometric conformations of the templating anions which direct the self‐assembly of the cations and anions.     

Synthesis and characterization of fluorine functionalized graphene oxide dispersed quinoline-based polyimide composites having low-k and UV shielding properties

Polyimide nanocomposites having low-k and UV shielding properties have been developed using fluorine functionalized graphene oxide and bis(quinoline amine) based polyimide. The polyimide was synthesized using bis(quinoline amine) and pyromellitic dianhydride at appropriate experimental conditions, and its molecular structure was confirmed through various spectral analysis such as FTIR and NMR. The polyimide (PI) composites were prepared using bis(quinoline amine), pyromellitic dianhydride, and separately filled with 1, 5, 10 wt% of fluorinated graphene oxide (FGO) through in situ polymerization. The polymer composites were characterized using thermo gravimetric analysis (TGA), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM). In addition, the water contact angle, dielectric behavior, and UV–Vis shielding behavior of FGO/PI composites were evaluated. The value of the water contact angle of the polyimide was increased with increment of FGO in the polyimide matrix. The highest water contact angle of polyimide composites observed 108° was obtained for 15 wt% FGO reinforced polyimide composite. The value of the dielectric constant for neat, 1, 5, and 15 wt% FGO reinforced polyimide composites was obtained as 4.5, 3.7, 2.6, and 2.0, respectively. It is also observed from by UV–Vis spectroscopy analysis that the FGO reinforced polyimide composites have good UV shielding behavior.     

Residue valorization: Preparation of recyclable organic amine adsorbent using laterite residue

This study focuses on exploiting the main component of traditional nickel metallurgical waste for use as a valuable material that can be applied in the removal of organic amines from water systems. Silicon compounds from metallurgic waste were converted into dissolvable sodium silicate by roasting the waste with alkali. Silica with adsorption capacity was combined with magnetic NiFe cores by the carbonation decomposition of purified silicate solution. The composite magnetic adsorbent was characterized, and its adsorption mechanism for organic amines was investigated. The effects of the initial trimethylamine concentration, contact time and temperature on the adsorption efficiency of the composite adsorbent towards trimethylamine were investigated. It was found that the adsorption fit the Freundlich mode well. The adsorption kinetics can be described by a pseudo-second-order kinetic model. The adsorption capacity reached 55.8 μg/mg at 293 K. The use of metallurgical waste to prepare the magnetic composite adsorbent has three advantages, which include benefiting the environment by reducing the amount of solid waste and costs associated with constructing and maintaining storage facilities, generating valuable products in an economical manner and conveniently recycling used adsorbents to avoid secondary pollution.     

Synthesis,characterization and biological activity evaluation of new 3- methyl and 4- fluoro isoindoline-1, 3-dione/phthalimide analogues

The convenient route for the synthesis of a series of new Isoindoline-1, 3-dione/phthalimide analogues by condensation of substituted phthalic anhydride with an appropriate Ar-amine is described. Selective phthalimide derivatives were evaluated for their preliminary biological activities against Gram-positive, Gram-negative and fungi strains. These encouraging results could be helpful for the development of new antibacterial or antifungal agents.     

β-二亚胺配体支持的铝胺化合物的制备及其催化ε-己内酯开环聚合的高效性能

成功合成了由β-二亚胺配体(L)支持的铝胺化合物(L)AlH(NMe2)2(L=HC(C(Me)NAr)2,Ar=2,6-iPr2C6H3)(1)。该化合物采用分步合成法进行制备,以n-BuLi与HNMe2反应生成的锂盐LiNMe2作为前驱体,进一步与(L)AlH2溶液共混通过消除LiH得到目标产物。通过核磁共振谱、元素分析、红外漫反射光谱和X射线单晶衍射确定了铝胺化合物(L)AlH(NMe2)2的组成与结构。该铝胺化合物中,金属Al中心同时形成Al-H和Al-NMe2基团,在催化ε-己内酯的开环聚合的反应中展现出了优异的催化活性。通过高效凝胶渗透色谱测定了所得聚合物的分子量和分子量分布。