Cadmium colloids from non-aqueous solvents

Cadmium colloids have been prepared by Chemical Liquid Deposition (CLD). The metal is evaporated to yield atoms which are solvated at liquid nitrogen temperature, and upon warming, stable liquid colloids are formed with particle size ranging between 25–100 Å. Zeta potentials were calculated according to the conversion of Hunter and the Hückel equation, for ethanol and dimethyl sulphoxide. UV/VIS measurement of most of the black colloids showed absorption band around 280 nm. For comparison, we prepared CdS colloid with size 400–625 Å. The colloids are stable to oxidation in air and/or oxygen bubbling. The synthesis of colloids and films from Cd with acetone, 2-butanone, ethanol, 2-propanol, 2-methoxyethanol, DMF and DMSO is reported. Transmission Electron Microscopy (TEM) allows us to determine particle size.     

Plasma-chemical decomposition of methane during diamond synthesis

Using a mass spectrometric sampling method, we have observed the decomposition of CH₄ in an rf plasma usedfor diamond deposition. The gas samples were extracted through an orifice located downstream of the plasma zone and analyzed online. For the experiments a dilute mixture of H₂ and CH₄ containing 0.1–3% CH₄ has been used. CH₄ is converted to C₂H₂ and C₂H₄ quantitatively. Small amounts of heavier hydrocarbons are formed. A comparison of the experimental results with a recent kinetic model treating a purely thermal environment is made and the differences between our experiment and the model are explained. The role of acetylene as a species formed in an atmosphere rich in atomic hydrogen is proposed. The electron impact dissociation process is suggested as the rare-determining step in the plasma-chemical decomposition of methane.     

In-gel deglycosylation of sodiumdodecyl sulfate polyacrylamide gel electrophoresis-separated glycoproteins for carbohydrate estimation by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Mass determination by mass spectrometric methods (electrospray ionization mass spectrometry (ESI-MS), matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS)) of sodiumdodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE)-separated proteins is a well known procedure and reliable protocols are available. In our efforts to use the established methods to determine the molecular mass of the disulfide bridged, heterodimeric glycoprotein GP3 and to determine the carbohydrate content of each protein subunit we developed an in-gel chemical deglycosylation method. For this purpose we established experimental conditions that allow maximum extraction of the high molecular mass protein subunits and developed a routine method to apply the HF-pyridine deglycosylation protocol to proteins isolated from polyacrylamide gel pieces. The novel protocol and extraction procedure described can be used to analyze O-glycosylated proteins up to 150 kDa after SDS-PAGE separation.     

Study on the Tautomer Interconversion of 3-Oxo Pentanoate During Gas Chromatography

Enol and keto tautomers of methyl 3-oxo pentanoate could be separated on a HP-5 capillary column. The chromatographic peaks were identified by examining characteristic mass ions arose from the corresponding enol and keto molecular ions. The study showed that the area percentage of enol tautomer is a function of temperature of the column. Treating the column as a reactor, the energy of activation for the on-column tautomerization could be extracted (35.1 kJ mol⁻¹) by monitoring the loss of the enol tautomer, because the reaction is found to obey pseudo first-order kinetics. The enthalpy and the entropy changes (ΔH = −3.98 kJ mol⁻¹, ΔS = −7.89 J K⁻¹mol⁻¹) for the enol-to-keto reaction in the stationary phase were also obtained.     

Synthesis, X-ray structure and properties of a new nitrite-bound copper(II) complex with 2-(3,5- dimethylpyrazol-1-ylmethyl)pyridine in a CuN4(O) coordination

Synthesis and characterization of a nitrite-bound copper(II) compound [CuL⁴)₂(ONO)]ClO₄ have been achieved (L⁴ = 2-(3,5-dimethylpyrazol-1-ylmethyl)pyridine]. The bidentate ligand L⁴ provides a pyridine and a pyrazole donor site; however, they are separated by a methylene spacer. The complex has been structurally characterized and it belongs to only a handful of complexes having nitrito-bound mononuclear copper(II) centre. The metal atom has a distorted square pyramidal geometry with the copper atom displaced from the equatorial plane by 0.25 Å. In MeCN solution the green complex exhibits a broad ligand-field transition at 655 nm with a shoulder at 675 nm and in dichloromethane-toluene glass (80 K) it exhibits an EPR spectral feature characteristic of the unpaired electron in the d_x²−y² orbital. Variable-temperature (80–300 K) magnetic susceptibility measurements in the solid state as well as room temperature measurement in MeCN solution reveal mononuclear magnetically dilute copper(II) centre. When examined by cyclic voltammetry (MeCN solution) it displays electrochemically irreversible Cu^II---Cu^I response [cathodic peak potential, E_pc (V vs saturated calomel electrode (SCE)): −0.32]. An oxidative response is observed at 1.14 V, probably due to bound-nitrite oxidation and is partially removed to generate a solvated complex at the electrode surface. The latter species gives rise to reversible Cu^II---Cu^I redox response [ ].     

Emission characteristics of high-powered microwave induced plasma optical emission spectrometry by using nitrogen–oxygen mixture gas

A high-powered, microwave-induced nitrogen–oxygen plasma (N₂–O₂–MIP) generated by using an Okamoto cavity at atmospheric pressure was investigated when the observation height, the flow rate of carrier gas, and the oxygen content were varied as the experimental parameters. The emission characteristics of the plasma were evaluated with regard to the excitation temperature and the intensity ratio of atomic line to ionic line. The excitation temperature of the N₂–O₂–MIP was in the range of 5100–5700 K when the oxygen content was varied from 0 to 30% at the observation height of 7 mm and the carrier gas flow rate of 0.6 l/min. The intensity ratio of atomic line to ionic line was elevated with an increase in the oxygen content.     

Sequential injection analysis for benzophenone-4 and phenylbenzimidazole sulphonic acid in sunscreen sprays by solid-phase extraction coupled with ultraviolet spectrometry

A sequential injection UV method was developed to determine benzophenone-4 (BZ4) and phenylbenzimidazole sulphonic acid (PBS) simultaneously, these being the most commonly used UV-filters in aqueous formulations used as sunscreen sprays. The selective elution of both was performed by on-line solid-phase extraction, by retention on a SAX microcolumn and separation by varying the pH of elution. The sensitivity obtained was 0.042±0.001 ml μg⁻¹ for PBS and 0.0159±0.0003 ml μg⁻¹ for BZ4. The limit of detection was 1.6 μg ml⁻¹ for PBS and 0.6 μg ml⁻¹ for BZ4. The R.S.D. of the results was 1-6% for PBS and 1-12% for BZ4. The method was validated using commercial sunscreen formulations with concentrations determined by a liquid chromatographic procedure. The two procedures gave comparable results. Automation of the method means the amount of reagents used and residues generated are decreased. The system allows the required analysis sequence to be programmed using suitable software.     

Thermal behavior of bismaleimide resin

The cure of a bismaleimide (BMI) neat resin modified with an aromatic diamine and a siloxane elastomer, has been studied by ¹³C solid state nuclear magnetic resonance. Two chemical reactions occur during the cure cycle; at a low temperature, Michael's reaction predominates, while at a high temperature the polymerization of the double bond maleimide creates the network. The degradation of this BMI material was characterized with isothermal and dynamic thermogravimetric analyses in air and in nitrogen. The BMI thermal stability is lower in nitrogen than in air. This behavior is an indication of oxygen participating in reactions at high temperatures. The activation energy (E_a) of thermal degradation was determined from isothermal data using an Arrhenius equation (In V vs. 1/T). The global E_a for the weight loss in air was found to be 91 kJ/mol. The nature and the evolution of the thermal degradation products were the combined analyzed by techniques of pyrolysis, gas chromatography and mass spectrometry. The major thermal decomposition products obtained in the temperature range of 300–700°C are identified as benzene, methyl formamide, aniline, toluene and isocyanate-derived products.     

Azocalixarenes: Synthesis, Characterization, Complexation, Extraction, Absorption Properties and Thermal Behaviours

Azocalixarenes, which have a conjugated chromophore azo (–N=N–) group in p-positions, are synthesized in “one-pot” procedures in satisfactory yields. Their structures in the solid and solution are elucidated by UV–vis, FT-IR, ¹H and ¹³C NMR spectroscopic methods as well as elemental analysis techniques. Some of them are complexed with metal ions (alkali, alkaline-earth and transition metal ions) under neutral conditions. A wide variety of applications is expected by the functionalization of the side arms. The selective liquid–liquid extraction of various alkali, alkaline-earth and transition metal cations from the aqueous phase to the organic phase is carried out by using azocalixarenes. Furthermore, the synthesized azocalixarenes are utilized for selective extraction of Fe³⁺ cations from the aqueous phase to the organic phase. The effects of varying pH and solvent upon the absorption ability of azocalixarenes substituted with electron-donating and electron-withdrawing groups at their o-, m-, p-positions are examined. The thermal behaviours of azocalixarenes containing upper rim functionalized groups are investigated by means of thermogravimetry (TG), differential thermal analysis (DTA) and differential thermogravimetry (DTG).     

Comparative characterisation by atomic force microscopy and ellipsometry of soft and solid thin films

Ellipsometry and atomic force microscopy (AFM) were used to study the film thickness and the surface roughness of both ‘soft’ and solid thin films. ‘Soft’ polymer thin films of polystyrene and poly(styrene–ethylene/butylene–styrene) block copolymer were prepared by spin‐coating onto planar silicon wafers. Ellipsometric parameters were fitted by the Cauchy approach using a two‐layer model with planar boundaries between the layers. The smooth surfaces of the prepared polymer films were confirmed by AFM. There is good agreement between AFM and ellipsometry in the 80–130 nm thickness range. Semiconductor surfaces (Si) obtained by anisotropic chemical etching were investigated as an example of a randomly rough surface. To define roughness parameters by ellipsometry, the top rough layers were treated as thin films according to the Bruggeman effective medium approximation (BEMA). Surface roughness values measured by AFM and ellipsometry show the same tendency of increasing roughness with increased etching time, although AFM results depend on the used window size. The combined use of both methods appears to offer the most comprehensive route to quantitative surface roughness characterisation of solid films. Copyright © 2007 John Wiley & Sons, Ltd.