液晶光阀的电光色散特性研究

分析液晶光阀(LCLV)的电光色散特性,重点研究扭曲向列型液晶光阀TB3639的电光色散特性。在温度为27 ℃时, 将TB3639液晶光阀置于频率为1 000 Hz的交流电场中,测出电光特性T-λ曲线,同时得到不同波长的T-V电光特性曲线,确定对比度与光波波长的函数关系k(λ),并得出电光色散特性关系曲线k(λ)～λ。分析结果表明, TB3639液晶光阀在可见光区域,具有相对较高的对比度,其色散较小。波长在450～750 nm区域其对比度均大于0.8;其中波长在550～670 nm区域其对比度变化不大,均大于0.95,其色散最小。     

用偏光织构及透射光谱分析液晶器件的老化

对一组台式计算器液晶显示器进行了光辐照,研究了光辐照对液晶显示器件显示品质的影响。采用偏光显微镜观察到了辐照后液晶的偏光织构的变化,液晶中出现了平行的条纹状织构和失去消光作用的黑洞,随着接受光辐照时间的增加,黑洞数量越来越多,面积越来越大。通过由计算机控制的双光束紫外-可见分光光度计测试了透射光谱的变化,发现其透射率随着接受光辐照时间的增加而降低。分析结果表明,条纹状织构和黑洞的出现是由于液晶分子结构在紫外线的照射下发生了变化所致,失去消光作用的黑洞是导致液晶器件透射率持续下降的主要原因。     

Experimental investigation on the effects of the standoff distance and the initial radius on the dynamics of a single bubble near a rigid wall in an ultrasonic field

Bubble behaviors near a boundary in an ultrasonic field are the fundamental forms of acoustic cavitation and of substantial importance in various applications, such as industry cleaning, chemical engineering and food processing. The effects of two important factors that strongly affect the dynamics of a single acoustic cavitation bubble, namely, the initial bubble radius and the standoff distance, were investigated in this work. The temporal evolution of the bubble was recorded using high speed microphotography. Meanwhile, the time of bubble collapse and the characteristics of the liquid jets were analyzed. The results demonstrate that the intensity of the acoustic cavitation, which is characterized by the time of bubble collapse and the liquid jet speed, reaches the optimum level under suitable values of the initial bubble radius and the normalized standoff distance. As the initial bubble radius and the normalized standoff distance increase or decrease from the optimal values, the time of the bubble collapse increases, and the first liquid jet’s speed decreases substantially, whereas the speeds of the second and third liquid jets exhibit no substantial changes. These results on bubble dynamics in an ultrasonic field are important for identifying or correcting the mechanisms of acoustic cavitation and for facilitating its optimization and application.     

Short-range order structure and free volume distribution in liquid bismuth: X-ray diffraction and computer simulations studies

ABSTRACT

The structure of liquid bismuth was studied by X-ray diffraction and computer simulation methods. The contraction of the atomic structure within the first coordination sphere in the temperature interval of 575-1225?K is reported. The temperature dependencies of the coordination numbers and of the free volume are analysed. On the basis of the temperature dependencies of the free volume, the temperature dependencies of viscosity and the self-diffusion coefficient were calculated to be in the ranges from 1.17 to 0.86?mPa?s and from 2.18 × 10^?9 to 5.44 × 10^?9?m²/s, respectively. The free volume – extracted results are in fair agreement with the experimental data and with the results obtained in the molecular dynamics simulations.     

Quantitative characterization of holographic displays based on liquid-crystal-on-silicon spatial light modulator

This report discusses the effect of speckle size on the quality of holographic images based on a liquid-crystal-on-silicon (LCoS) spatial light modulator (SLM). Further, it proposes methods of quantifying the average speckle size and holographic image resolution. These methods enable both characteristics to be compared using the same unit (the number of pixels in the holographic image), providing an intuitive and effective comparative analysis method. In particular, by varying the LCoS resolution ratio, the change in the resolvable minimum pixels of the holographic image is interpreted in conjunction with the average speckle size; moreover, an analysis of the correlation between the latter two is presented. This approach, based on LCoS resolution division, could provide useful insights into single-SLM-based, full-color holographic displays using space division. Furthermore, it could be extended to other components, including more advanced LCoS SLMs, and used to identify the relative effects on image quality with speckles.     

Comparison of analytical methods for the quality control of a new formulation containing soy extract and melatonin

Three analytical methods have been developed and compared for the quality control of a new formulation (Soymen GN(R) capsules) containing soy extract and melatonin for the treatment of menopausal symptoms. The first method is based on MEKC with diode-array detection, using a mixture of basic carbonate buffer (95%) and methanol (5%), containing 55 mM SDS, as the BGE. The second method is an HPLC method with UV detection at 260 nm. The third method is an HPLC method coupled to amperometric detection which is carried out at an oxidation potential of +0.8 V. In both HPLC systems, the chromatographic separation is obtained on an RP C18 column using a mixture of ACN and an acidic phosphate buffer (25:75 v/v) as the mobile phase. A feasible pretreatment procedure with a methanol/water mixture has been implemented to achieve the quantitative extraction of the main soy isoflavones and of melatonin from the capsules. The results obtained with the three methods are in good agreement with each other and satisfactory in terms of linearity (r(2) >0.9996), precision (RSD <5.4%) and accuracy (recovery >97%). Thus, each of the three analytical methods seems to be suitable for the simultaneous analysis of the main soy isoflavones and melatonin in the new commercial formulation.     

Liquid chromatography-mass spectrometry identification of imidacloprid photolysis products

Photolysis of imidacloprid by near ultraviolet (UV) radiation was investigated using reversed phase liquid chromatography (RPLC) and liquid chromatography-electrospray ionization/mass spectrometry (LC-ESI/MS) operated in the positive ion mode. The decomposition of imidacloprid by near UV light is first order with a half life of 10.18 h. Photo-degradation products of imidacloprid identified in this study included imidacloprid urea, imidacloprid olefin, and imidacloprid desnitro. A degradation pathway is proposed for imidacloprid from an examination of the product decay curves obtained in this monitoring study which was performed in a batch test mode.     

Rapid determination of trace polycyclic aromatic hydrocarbons in particulate matter using accelerated solvent extraction followed by ultra high performance liquid chromatography with fluorescence detection

A method has been developed for the trace analysis of polycyclic aromatic hydrocarbons, which are known as persistent organic pollutants and ubiquitous constituents of fine particulate matter that causes growing airborne pollution. The method, which was especially for samples of airborne particulate matter less than 2.5 μm in diameter, utilized accelerated solvent extraction and ultra high performance liquid chromatography with fluorescence detector. Four principal parameters of accelerated solvent extraction were optimized to obtain maximum extraction efficiency. Using the established synergetic programs of gradient elution and fluorescence wavelength switching, a rapid separation was achieved in 6.56 min with good linearity for 15 polycyclic aromatic hydrocarbons (coefficient of determination above 0.999). The limits of detection ranged from 0.833 to 10.0 pg/m³. The precision of the method expressed as inter‐day relative standard deviation ranged from 0.2 to 1%, which was calculated from nine repetitive measurements of 8.00 μg/L analytes. Average spiked recoveries ranged from 71.6 to 97.7%, with the exception of naphthalene. The rapid, sensitive, and accurate method can meet the pressing needs of health risk assessment and increasingly heavy daily tasks of air quality monitoring.     

液态锂限制器的铺展性测试平台设计及初步实验

为研究液态锂在电磁驱动限制器表面的铺展特性,设计了与EAST限制器接口相同的限制器测试平台.该平台运行时真空环境可达10?4Pa,对被测限制器可加热至350℃.在限制器锂回路管道上,利用外部2T水平磁场以及竖直方向施加的最大为200A的直流电流,形成电磁驱动力驱动下的锂液循环回路.测试平台设有顶部和正面两个观察窗,能够...     

超分子构筑调控合成结构规整的梯形聚合物及其应用研究

综述了"超分子构筑调控的逐步偶联/聚合法",该方法将高分子化学与超分子化学相结合,利用多种类型的超分子弱键协同作用首先构筑预期的梯形超分子结构,再经聚合得到共价键梯形高分子.利用该方法合成了一系列结构规整的氧桥基和有机桥基梯形聚硅氧烷以及碳基梯形聚酯,并利用侧基间π-π叠加作用实现了对聚合物立体构型控制.扼要介绍了梯形聚合物在先进材料方面的应用,例如梯形聚硅氧烷液晶光致取向膜;由梯形聚硅氧烷合成的管状聚硅氧烷在高室温储存期微电子环氧塑封料方面的应用;以及基于梯形聚硅氧烷的拟筛板聚合物在二阶非线性光学材料方面的应用等.