高温超导磁通跳跃过程中的磁致伸缩效应

文中基于超导磁通动力学理论,考虑电磁力与热激活对磁通运动的影响,基本模型包括由等效电阻率随超导体温度和磁场变化的磁通扩散方程,以及比热随超导体温度变化的热传导方程组成.在此基础上,用数值方法求解了这组非线性磁热耦合方程,主要研究了有磁通跳跃状发生状态时环境温度和外磁场速度对于高温超导磁致伸缩的影响.结果表明:磁通进入超...     

非链式脉冲DF激光器的关键技术（英文）

基于化学反应的非链式脉冲DF激光器是产生3.5～4.1μm波段的有效相干辐射光源,具有存储能量水平高等优点。这些优点使得该激光器倍受中红外领域激光研究者的重视。为了更好地提高非链式脉冲DF激光器的输出性能,研制高能量水平的DF激光器,本文详细介绍了自引发大体积放电技术、混合气体配比技术、循环冷却技术等DF激光器关键技术,重点介绍了自引发大体积放电技术。这几种技术将为研制高性能DF激光器提供理论指导。     

High power efficiency in single layer blue phosphorescent organic light-emitting diodes

High efficiency single layer blue phosphorescent organic light-emitting diodes (PHOLEDs) without any charge transport layer were developed. A mixed host of spirobifluorene based phosphine oxide (SPPO13) and 1, 1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC) was used as the host in the emitting layer. A high maximum external quantum efficiency of 15.8% and a quantum efficiency of 8.6% at 1000 cd/m² were achieved in the single-layer blue PHOLEDs without any charge transport layer. The maximum power efficiency and power efficiency at 1000 cd/m² were 31.4 and 16.9 lm/W, respectively.     

Analysis of Suzuki, Shanker, and Kumar formulations under strong compressions

A critical analysis of the Suzuki, Shanker, and Kumar formulations is presented by studying different classes of materials under high pressure. A similar trend for all the materials studied in the present work, demonstrates that Suzuki formulation is not capable to yield compression behaviour of solids. The Shanker formulation improves the results obtained by the Suzuki formulation in small compression range (0.9<V/V₀<1). For further compressions Shanker formulation also fails. On the other hand, the Kumar formulation is found to work well for the entire range of pressure. The reasons for the failure of Suzuki and Shanker formulations are discussed.     

Charge density study under high pressure

The experimental and analytical method of the high-pressure powder experiment at BL10XU, SPring-8, is described. There is no doubt that BL10XU must be one of the most appropriate beam lines for high pressure X-ray diffraction experiment taking advantage of third generation synchrotron source. As an example of the advanced charge density study under high pressure, the structural change of Cs₂Au₂Br₆ by applying pressure is studied by Rietveld/MEM analysis. It reveals that the structural change of Cs₂Au₂Br₆ by applying pressure occurs basically at electron level, such as valence state change and chemical bonding, which may be called the electronic phase transition.     

Parametrization of the effect of surface reflection on spectral infrared radiance measurements. Application to IASI

The recent launch of the Advanced Infrared Sounder (AIRS) on board EOS-Aqua and the scheduled launch of the Infrared Atmospheric Sounder Interferometer (IASI) on board the Meteorological Operational Satellite (METOP) in 2005 open interesting perspectives for remote sensing applications. Owing to their enhanced spectral resolution and sensitivity, this new generation of high-resolution infrared vertical sounders is first aimed at improving the vertical resolution of temperature and water vapor profile retrievals needed by the weather forecasting community. Another important possible use of these instruments, in the context of the study of global warming, is to permit the retrieval of the concentrations of greenhouse gases like , etc. In order to reach these two main objectives, improvement in the modeling of the radiative transfer is therefore necessary. One of the points which still needs some improvements is the contribution of the downward radiation reflected by the surface back to the satellite which is often improperly accounted for in radiative transfer calculation to save computer time. In this article, we show how it is possible to simplify the problem through the computation of a spectrally dependent “effective” emissivity for which a simple parametrization is proposed, while preserving the accuracy of the results.     

Optical absorption of lithium metal vapor at high temperatures

Experimental results are reported for a unique spectroscopic device called the Plasma Spectroscopy Cell. Optical absorption of lithium metal vapor was observed at high density and temperature. Absorption spectra are analyzed using theoretical calculations of absorption cross sections for lithium-helium interactions, and singlet and triplet state transitions of diatomic lithium in the visible spectral range. This is believed to be the most complex example yet calculated in which absolute bound-bound, bound-free, free-bound, and free-free contributions for all possible optically allowed transitions are all included, in quite respectable agreement with experiment.     

Concentric-ring structures in an atmospheric pressure helium dielectric barrier discharge

This paper performs a numerical simulation of concentric-ring discharge structures within the scope of a two-dimensional diffusion--drift model at atmospheric pressure between two parallel circular electrodes covered with thin dielectric layers. With a relative high frequency the discharge structures present different appearances of ring structures within different radii in time due to the evolvement of the filaments. The spontaneous electron density distributions help understanding the formation and development of self-organized discharge structures. During a cycle the electron avalanches are triggered by the electric field strengthened by the feeding voltage and the residual charged particles on the barrier surface deposited in the previous discharges. The accumulation of charges is shown to play a dominant role in the generation and annihilation of the discharge structures. Besides, the rings split and unify to bring and annihilate rings which form a new discharge structure.     

Synthesis and characterization of p-type boron-doped IIb diamond large single crystals

High-quality p-type boron-doped IIb diamond large single crystals are successfully synthesized by the temperature gradient method in a china-type cubic anvil high-pressure apparatus at about 5.5 GPa and 1600 K.The morphologies and surface textures of the synthetic diamond crystals with different boron additive quantities are characterized by using an optical microscope and a scanning electron microscope respectively.The impurities of nitrogen and boron in diamonds are detected by micro Fourier transform infrared technique.The electrical properties including resistivities,Hall coefficients,Hall mobilities and carrier densities of the synthesized samples are measured by a four-point probe and the Hall effect method.The results show that large p-type boron-doped diamond single crystals with few nitrogen impurities have been synthesized.With the increase of quantity of additive boron,some high-index crystal faces such as {113} gradually disappear,and some stripes and triangle pits occur on the crystal surface.This work is helpful for the further research and application of boron-doped semiconductor diamond.     

钚气溶胶环境中惰性气体氪迁移过程研究

放射性气体的安全性问题是涉及反应堆运行中必需研究的重要问题.因此在钚气溶胶环境中,对钚材料裂变产生的放射性气体裂变产物,需要研究其在钚气溶胶环境中的迁移过程.对放射性惰性气体Kr87,Kr88的实验测量数据进行了具体分析.依据它们具有钚材料直接裂变和作为固体裂变产物子体两种来源这一物理特性,在不同的制样时间对Kr87/Kr88比值变化规律进行分析.确立了这两种来源的在钚气溶胶环境中的物理图像和迁移过程的物理模型,并与实验数据进行比较以验证模型的正确性. 关键词： 钚气溶胶 气体裂变产物 放射性Kr87/Kr88 迁移过程