The effect of the structure of bonded cyanoalkyl stationary phases on their selectivity in the liquid chromatographic separation of polynuclear aromatic hydrocarbons

Summary The paper discusses the effect of the length and structure of the hydrocarbon chain connecting the nitrile group to the silica gel surface on the chromatographic properties of cyanoalkyl phases.When using non-polar and polar mobile phases, the selectivity of the cyanodecyl phases toward PAHs is higher than of the cyanopropyl phase and of hydroxylated silica gel.Polar additives to the mobile phase drastically decrease the retention on silica gel and on the cyanopropyl phase while affect the properties of cyanodecyl phases only to a considerably less degree. Newly synthesized phases with different structures of the hydrocarbon chain are compared with the commerical cyano-and ODS-phases. The retention mechanism on the cyanoalkyl phases is discussed.     

High-Performance Liquid Chromatographic Analysis of Amino Acids in Edible Seaweeds after Derivatization with Phenyl Isothiocyanate

Summary A reversed-phase high-performance liquid-chromatographic method has been used for analysis of the amino acids in edible seaweed. Sample proteins were hydrolysed with hydrochloric acid and the amino acids produced were derivatized with phenyl isothiocyanate. The resulting phenylthiocarbamyl amino acids were chromatographed on an ODS2 column with UV detection at 254 nm. The mobile phase was a mixture of 0.14 M ammonium acetate buffer, pH 6.4, containing 0.05% triethylamine (A) and 60:40 (v/v) acetonitrile–water (B), at a flow rate of 1.1 mL min^–1; the elution gradient (min:A%) was: 0:90, 8:90, 10:70, 12:70, 18:52, 20:0, 25:0, 28:90, 35:90. Method precision for the different amino acids was between 1.33 and 3.88% (relative standard deviation); detection limits were between 6.9 and 14.3 ng mL^–1. The amino acid content of the algae analysed ranged from 22.4 ± 1.9 to 138.0 ± 5.6 mg g^–1 d.w. The amino acids present at highest concentrations were glutamic acid, alanine, and phenylalanine.     

Determination by LC of Polyphenols in Italian Red Wine

A reversed-phase liquid chromatographic method, optimised for the separation of trans-, and cis-resveratrol, catechin, epicatechin, quercetin and rutin, is reported. Separation was achieved using a C18 column and a gradient elution with acetonitrile and 5% formic acid aqueous solution. The analyses required an equilibration period of 10 min and a run time of 25 min for completion. Identification was based on retention characteristics and by relative UV spectra, obtained by photodiode array detector and were compared with commercial standards. Analyses were performed without any sample pre-treatment. Detection was carried out by UV–Vis detector at three different wavelengths. The detection limit ranged from 0.16 μgm L⁻¹ (cis-resveratrol) to 1.5 μgm L⁻¹ (+)-catechin. Investigation was extended to quantitative determination of phenol compounds in Italian red wine and to investigate the stability of the six antioxidants.     

A New Chemo‐Enzymatic Route to Side‐Chain Liquid‐Crystalline Polymers: The Synthesis and Polymerization of 6‐(4‐Methoxybiphenyl‐4′‐oxy)hexyl Vinyl Hexanedioate

A novel synthetic method combining chemo and enzymatic synthesis strategies was employed to prepare a vinyl acetate type monomer, 6‐(4‐methoxybiphenyl‐4′‐oxy)hexyl vinyl hexanedioate (VA‐LC). Homo‐ and copolymers of VA‐LC with maleic anhydride (MAn) were prepared by conventional free radical polymerization using 2,2′‐azobisisobutyronitrile (AIBN) and 1,1′‐azobis (cyclohexane carbonitrile) (AHCN) as an initiator at 95 and 60 °C, respectively. The thermal properties of the generated polymeric material were investigated by differential scanning calorimetry (DSC), and the optical texture was inspected by polarizing optical microscopy (POM). While the monomer VA‐LC does not exhibit liquid‐crystalline properties, poly(VA‐LC), and the alternating copolymer of VA‐LC with maleic anhydride both displayed such properties.

     

High performance liquid chromatography assay for alanine amino transferase

Summary An improved method of alanine-amino transferase determination is proposed. The reaction is carried out with alanine and 2-oxoglutarate as substrates and analysis is by HPLC on a reversed-phase chromatographic system using a C₁₈ column and tetrabutylammonium phosphate in phosphate buffer (pH 7.0)-acetonitrile as mobile phase. The enzyme activity was determined by directly following the formation of pyruvic acid without employing any secondary reaction, which is necessary in the spectrophotometric method. The detection limit of pyruvic acid is 10 pmole l^–1 and the standard deviation for the enzymatic activity of standard solutions is 5.4%. Furthermore under the chromatographic conditions selected it is possible to detect the presence of some intermediate species.Work supported by National Research Council of Italy. Presented in part at the First International Symposium on Applications of HPLC in Enzyme Chemistry, Verona, September 1990.     

Fractionation and purification of antioxidant peptides from Chinese sturgeon (Acipenser sinensis) protein hydrolysates prepared using papain and alcalase 2.4L

Protein hydrolysates have the potential to be natural and safer sources of bioactive peptides. In this study, two proteases were used to hydrolyze Chinese sturgeon (Acipenser sinensis) protein, and the hydrolysates were then purified to yield antioxidant peptides. The degree of hydrolysis of 23.56 % and 18.14 % was obtained using papain and alcalase 2.4L, respectivly, and hydrolysates had 96.80 % and 87.24 % total amino acid content, respectivly. The papain hydrolysate (PH) and alcalase 2.4L hydrolysate (AH) showed good antioxidant activity against DPPH^? (IC₅₀ of 3.64 and 3.15 mg/mL) and ABTS^?+ (IC₅₀ of 1.92 and 1.58 mg/mL), respectively. The low-molecular-weight (<1000 Da) fraction of both hydrolysates demonstrated the highest antiradical activity (IC₅₀ of 2.59 and 2.31 mg/mL, DPPH) and (IC₅₀ of 1.54 and 1.36 mg/mL, ABTS), respectively. Nine peptides were separated from both hydrolysates using reverse phase high performance liquid chromatography (RP-HPLC). The IC₅₀ for ABTS^?+ scavenging activity of peptide P5 with valine, glycine and asparagine (MW of 282.13 Da) from PH, and peptide P3 with histidine, glycine and alanine (MW of 302.74 Da) from AH was 0.89 and 0.72 mg/mL, respectively. The fractions and purified peptides obtained from Chinese sturgeon hydrolysates could be utilized as natural antioxidant substitutes in pharmaceuticals and food products.     

Influence of silica gel pretreatment and bonding technique on PAH selectivity of octadecyl bonded phases

Summary The effect of silica gel pretreatment and of different bonding techniques, on the chromatographic properties of octadecyl bonded phases is described. The experiments show that a monomeric octadecyl bonded phase, prepared from silica gel that has not been treated before bonding, has a poor selectivity towards polycyclic aromatic hydrocarbons (PAHs) and shows high adsorption of basic components. Silica gel treatment before the bonding of the monofunctional silane does not give a substantial improvement. Polymeric phases on the other hand show a much better PAH selectivity and a lower adsorptivity towards basic components. Further improvement can be achieved with the polymeric modification if silica gel treatment is carried out before bonding.     

Application of ionic liquids as low-volatility plasticizers for PMMA

Room temperature ionic liquids (ILs) based on imidazolium salts, were found to be excellent plasticizers for poly(methyl methacrylate), with improved thermal stability, and the ability to reduce glass transition temperatures to near 0 °C. Because ILs have environmentally benign properties, they can be used in place of traditional chemicals in numerous products and processes. In this work, PMMA was formulated using dioctyl phthalate, DOP, as a traditional plasticizer, and properties were compared to PMMA plasticized with two ILs: butyl methylimidazolium/hexafluorophosphate, [bmim⁺][PF₆⁻], and hexyl methylimidazolium/hexafluorophosphate, [hmim⁺][PF₆⁻]. Formulations incorporated up to 30 vol.% DOP and 50 vol.% ILs. Bulk and plasticized polymers were characterized for glass transition temperature, elastic modulus, and the thermal stability of the plasticizers.     

Rapid liquid chromatographic-mass spectrometric analysis of withanolides in crude plant extracts by use of a monolithic column

Summary A rapid analytical method has been developed for the mutual resolution of three steroidal compounds, withaferin A, iochromolide, and withacnistin. Liquid chromatography was performed on a Chromolith analytical column (4.6 mm i.d.×50 mm), made from a cylindrical silica rod, operated at a flow rate of 4 mL min⁻¹ with a simple linear gradient prepared from 0.1% aqueous formic acid and 0.1% formic acid in acetonitrile. Under optimum conditions simultaneous separation of the compounds was achieved in less than 7 min, one eighth the time required for conventional LC separation. The overall analysis time was reduced without sacrificing chromatographic performance—essential for the resolution of positional isomers such as iochromolide and withacnistin. The column was coupled to a single-quadrupole mass spectrometer and the method was characterized by good performance in terms of repeatability, selectivity, linearity, and sensitivity. Detection limits in the single-ion-monitoring mode were 0.15 μg mL⁻¹ or below. Finally, the developed method was successfully applied to the determination of withanolides in extracts fromlochroma gesnerioides obtained by three different processes—traditional Soxhlet extraction and two faster methods, microwave-assisted extraction and pressurized solvent extraction.     

Element-selective detection using capillary gas chromatography with atomic emission detection

Capillary GC coupled to an atomic emission detector (AED) provides a powerful new hyphenated technique for the separation and characterization of complex mixtures and compounds. The AED provides simultaneous and truly specific multi-element detection. The specificity of detection reduces the need for the complex sample pretreatment procedures which are necessary to reduce the interference from co-eluted substances which is experienced with detectors such as the FID and the ECD. A range of environmentally significant problems has been studied, including PCB analysis, the characterization of the reaction products of a novel waste treatment process, and the profiling of sulfur-containing species formed by the pyrolysis of various types of coal.