Radiation-enhanced diffusion and fission gas release from recrystallised grains in high burn-up \hbox{UO}_{2} nuclear fuel

The effective diffusion coefficient that gives a steady-state xenon concentration of 0.2-0.3wt% in the recrystallised grains of high burn-up UO 2 fuel is calculated to lie in the range 10 m 24 to 10 m 22 m 2 s m 1 . These values are one to three orders of magnitude lower than the value currently accepted for the radiation-enhanced diffusion coefficient. The time required to reach the steady-state concentration depends on the local fission rate, the grain size distribution and the precise magnitude of the radiation-enhanced diffusion coefficient, and can take from 2 to 10 years. Additional calculations reveal that substantially less than 10% of the fission gas inventory is released from the original UO 2 grains in the outer region of the fuel prior to recrystallisation. In contrast, with a diffusion coefficient of 10 m 22 m 2 s m 1 more than 80% of the fission gas is released from the recrystallised grains of the high burn-up structure in one year.     

A novel sorptive extraction method based on polydimethylsiloxane frit for determination of lung cancer biomarkers in human serum

In this study, a porous polypropylene frit was coated with polydimethylsiloxane (PDMS) as extraction medium, based on the home-made PDMS-frit, a rapid, simple and sensitive sorptive extraction method was established for analysis of potential biomarkers of lung cancer (hexanal and heptanal) in human serum samples. In the method, derivatization and extraction occurred simultaneously on the PDMS-frit, then the loaded frit was ultrasonically desorbed in acetonitrile. Polymerization, derivatization–extraction and desorption conditions were optimized. Under the optimal conditions, satisfactory results were gained, a wide linear application range was obtained in the range of 0.002–5.0 μmol L⁻¹ (R > 0.997) for two aldehydes, the detection limits (S N⁻¹ = 3) were 0.5 nmol L⁻¹ for hexanal and 0.4 nmol L⁻¹ for heptanal. The relative standard deviations (RSDs, n = 5) of the method were below 7.9% and the recoveries were above 72.7% for the spiked serum. All these results hint that the proposed method is potential for disease markers analysis in complex biological samples.     

Mobile relays for enhanced broadband connectivity in high speed train systems

With the introduction of wireless modems and smart phones, the passenger transport industry is witnessing a high demand to ensure not only the safety of the trains, but also to provide users with Internet access all the time inside the train. When the Mobile Terminal (MT) communicates directly with the Base Station (BS), it will experience a severe degradation in the Quality of Service due to the path loss and shadowing effects as the wireless signal is traveling through the train. In this paper, we study the performance in the case of relays placed on top of each train car. In the proposed approach, these relays communicate with the cellular BS on one hand, and with the MTs inside the train cars on the other hand, using the Long Term Evolution (LTE) cellular technology. A low complexity heuristic LTE radio resource management approach is proposed and compared to the Hungarian algorithm, both in the presence and absence of the relays. The presence of the relays is shown to lead to significant enhancements in the effective data rates of the MTs. In addition, the proposed resource management approach is shown to reach a performance close to the optimal Hungarian algorithm.     

Monocrystalline ZnSe as an ionising radiation detector operated over a wide temperature range

This work presents an analysis of the main requirements for semiconductor detectors of ionising radiation that can be operated over a wide temperature range. The analysis shows that wide-gap semiconductors with a band gap greater than 2.0 eV are a better option for effective detection of ionising radiation at high temperatures. The results of an experimental investigation into the luminescent, electrical and spectrometric properties of the wide-gap semiconductor ZnSe are shown as an example. Undoped monocrystalline ZnSe has an extremely low leakage current over a wide range of temperatures up to 167 °C and can be used as a radiometric X-ray detector in pulse-counting mode over a wide temperature range up to at least 130 °C.     

基于现场可编程门阵列单探测器复合轴控制技术

为了解决空间激光通信系统中单探测器复合轴结构的粗精解耦难题,通过分析二维关联控制矩阵,得出粗精跟踪解耦的必要条件,提出了一种单探测器复合轴结构的工作方式.在跟踪过程中,相机直接配合子轴执行器完成精跟踪工作,而主轴的跟踪信息由子轴的角度偏转器来提供,同时所有的图像处理算法、位置检测算法、以及粗精伺服控制算法都在现场可编程门阵列中实现,完成了系统的轻小型化设计.实验搭建了测试系统,并对现场可编程门阵列硬件和系统跟踪性能进行测试,结果表明单探测器复合控制系统可以实现跟踪准确度优于3μrad,为工程化奠定了良好的基础.     

Quantitative assessment of motion correction for high angular resolution diffusion imaging

Several methods have been proposed for motion correction of high angular resolution diffusion imaging (HARDI) data. There have been few comparisons of these methods, partly due to a lack of quantitative metrics of performance. We compare two motion correction strategies using two figures of merit: displacement introduced by the motion correction and the 95% confidence interval of the cone of uncertainty of voxels with prolate tensors. What follows is a general approach for assessing motion correction of HARDI data that may have broad application for quality assurance and optimization of postprocessing protocols. Our analysis demonstrates two important issues related to motion correction of HARDI data: (1) although neither method we tested was dramatically superior in performance, both were dramatically better than performing no motion correction, and (2) iteration of motion correction can improve the final results. Based on the results demonstrated here, iterative motion correction is strongly recommended for HARDI acquisitions.     

Study of brain anatomy with high-field MRI: recent progress

Recent developments in high-field magnetic resonance imaging technology have led to improved contrast and resolution and are opening up new possibilities for the study of human brain anatomy. In particular, techniques sensitized to magnetic susceptibility contrast provide particular advantages at high field that have allowed visualization of brain structures that have been difficult to detect with conventional technology. In this review, some of these developments and techniques will be discussed, and an attempt will be made to interpret magnetic susceptibility contrast based on recent studies.     

The assay of pterostilbene in spiked matrices by liquid chromatography tandem mass spectrometry and isotope dilution method

Pterostilbene (trans‐3,5‐dimethoxy‐4‐hydroxystilbene) is an active component found in several plant species, exhibiting important pharmacological properties. A new and reliable method of assaying this phyto compound in various matrices is presented; the assay is based on (1) the selectivity of liquid chromatography (LC) hyphenated with electrospray ionisation (ESI), (2) the specificity of a two‐step mass spectrometric analysis (MS/MS) and (3) the accuracy of the isotope dilution method. The labelled analogue may be conveniently synthesised in a few steps. The sensitivity of the method is confirmed by the very low limit of detection (LOD) and limit of quantitation (LOQ) values achieved in the assay of pterostilbene in two distinct fortified matrices, and is further supported by the observed accuracy values. Copyright © 2010 John Wiley & Sons, Ltd.     

POLYMERIZATION OF ETHYLENE AND PROPYLENE WITH VCL4-BUTYLLITHIUM CATALYSTS

Polymerization of ethylene and propylene with VCl₄-BuLi (Bu = n-Bu, sec-Bu, tert-Bu) catalysts was investigated. The VCl₄-BuLi catalysts were found to initiate the polymerization of ethylene and propylene. The VCl₄-BuLi catalysts gave an ultra high molecular polyethylene. The effect of the Li /V mole ratio on the polymerization of ethylene with the VCl₄-BuLi catalysts was observed, an the catalyst gave an optimum rate at the Li/V ratio of about 3.0. The polyethylene obtained with the VCl₄-BuLi catalyst was found to be a linear structure. In the polymerization of propylene with the VCl₄-BuLi catalyst, the polymers contain mm contents of 56–66% were produced.