高温超导磁体试验装置设计

在高温超导磁体试验装置设计中,冷却方式有制冷机传导冷却和液氮浸泡冷却两种。制冷机传导冷却是将磁体通过一种热导率高的材料与制冷机冷头相连。该方式为保证绝缘、冷量传递、温场均匀性等指标,对磁体的结构设计要求较高;液氮浸泡冷却是将高温超导磁体浸泡在液氮中,该方式虽然对磁体结构设计要求有所降低,但在试验过程中需定期补充蒸发掉的液氮,试验过程较繁琐。有鉴于此,我们设计了一套利用热虹吸原理的零蒸发液氮浸泡冷却高温超导磁体试验装置,超导磁体吊装在杜瓦上盖板法兰下,液氮浸泡超导磁体,带GM制冷机的液氮再冷凝杜瓦与超导磁体分开,用一根真空绝热管道将两者连接起来,利用热虹吸原理构成自循环系统。     

卫星激光通信滤光膜的研制

为满足卫星激光通信中超高速数据传输的特殊要求,采用电子束和离子辅助沉积技术,制备了532nm、632nm和1 064nm波长处高反射,808nm和1 550nm处高透射的多波段滤光膜.选取了H4和SiO2作为高低折射率材料,通过对膜系设计曲线的不断优化,减少了灵敏层的个数,得到了相对易于制备的膜系结构;采用电子束加热蒸发方法并加以离子辅助沉积系统制备薄膜,采用光控与晶控同时监控的方法控制膜厚;通过不断调整工艺,提高了薄膜的抗激光损伤能力,减小了膜厚控制误差,提高了透射波段的透过率及反射波段的反射率,最终得到了光谱性能较好的滤光膜.该薄膜能够承受雨淋、盐雾、高低温等环境测试,满足使用要求.     

Stable isotope dilution assay for the accurate determination of tricaine in fish samples by HPLC–MS–MS

Tricaine methanesulfonate is one of most commonly used anesthetics in fish during blood sampling, artificial propagation and long‐distance transportation. In this study, an accurate method for the quantitative determination of tricaine in fish samples by a stable isotope dilution assay coupled with high‐performance liquid chromatography–triple quadrupole mass spectrometry was developed. Tricaine‐D₅ was synthesized and used as an isotopically labeled internal standard for the determination of tricaine. The analytical performance of the method was validated for tricaine determination in marine fish and freshwater fish. The determination of tricaine was linear in the range of 2.0–200.0 μg L^?1. The limit of detection and limit of quantitation for fish muscle tissues were 1.0 and 4.0 μg kg^?1, respectively. Good recoveries were obtained in the range of 92.08–97.50%. The inter‐ and intra‐assay relative standard deviations (RSD values) were investigated, and the values were 0.39–3.01 and 0.85–2.77%, respectively. The values of CCα and CCβ were 10.21–10.43 and 10.42–10.87 μg kg^?1, respectively. The clearance of MS‐222 from grass carp was further studied using our method. The results demonstrate that MS‐222 could be well absorbed and rapidly eliminated after bath administration.     

高效液相色谱三元梯度分离法测定大气中11种醛酮类化合物的研究

研究选择了以２,４－二硝基苯肼衍生化三元梯度洗脱的高效液相色谱测定大气中１１种醛酮类化合物的最佳色谱分离条件,醛酮类化合物的检出限０．４５到２．０４ｎｇ,各化合物保留时间和相对标准偏差ｓ,≤０．３８％在所测定的含量范围内具有很好的线性关系,每种化合物的相关系数均大于０．９９９;研究了涂敷２,４－二硝基苯肼硅胶吸附采样夹的制作方法,并应用于大气环境中醛酮类化合物的分析。方法简单、快速,１１种醛酮类化     

Preparative isolation of pseudolaric acids A and B,and their glucosides from the root bark of Pseudolarix kaempferi using high‐speed counter‐current chromatography

In order to provide the chemical markers for the quality control of herbal medicines, four diterpenoids, pseudolaric acids A and B (PAA and PAB), and their glucosides were isolated from the methanol extract of the Chinese herb Pseudolarix kaempferi using high‐speed counter‐current chromatography (HSCCC). The diphase solvent system was n‐hexane/EtOAc/MeOH/H₂O which was used at two ratios (5:5:5:5 and 1:9:4:6 by volume) in the separation of pseudolaric acids and their glycosides, respectively. As a result, PAA (14 mg), PAB (129 mg), PAA‐O‐β‐D ‐glucopyranoside (8 mg, PAAG), and PAB‐O‐β‐D ‐glucopyranoside (42 mg, PABG) were obtained from 0.5 g of the crude extract. Their purities were determined to be above 97% by HPLC analysis. Their chemical structures were confirmed by ¹H and ¹³C NMR analysis or HPLC comparison with the reference compounds.     

碱性去活性柱液相色谱测定水溶性维生素

采用碱性去活性柱高效液相色谱法同时分离测定了７种水溶性维生素。不需加入离子对试剂和胺类改性剂,峰形尖锐,用梯度洗脱分离完全,效果良了,方法的精密度为标准偏差５％以内,回收率为８９％￣１０２％,并用于实际样品的测定。     

Isotope dilution-thermal ionisation mass spectrometric analysis for tin in a fly ash material

Isotope dilution-thermal ionisation mass spectrometry (ID-TIMS) analysis has been applied to the determination of tin in a fly ash sample supplied by the EC Joint Research Centre (Ispra, Italy). The proposed procedure includes the silica gel/phosphoric acid technique for tin thermal ionisation activation and a strict heating protocol for isotope ratio measurements. Instrumental mass discrimination factor has been previously determined measuring a natural tin standard solution. Spike solution has been prepared from ¹¹²Sn-enriched metal and quantified by reverse isotope dilution analysis. Two sample aliquots were spiked and tin was extracted with 4.5 M HCl during 25 min ultrasound exposure time. Due to the complex matrix of this fly ash material, a two-step purification stage using ion-exchange chromatography was required prior TIMS analysis. Obtained results for the two sample-spike blends (10.11 ± 0.55 and 10.50 ± 0.64 μmol g⁻¹) are comparable, both value and uncertainty. Also a good reproducibility is observed between measurements. The proposed ID-TIMS procedure, as a primary method and due to the lack of fly ash reference materials certified for tin content, can be used to validate more routine methodologies applied to tin determination in this kind of samples.     

Crystal structure and high-pressure properties of γ-Mo2N determined by neutron powder diffraction and X-ray diffraction

We prepared samples of cubic γ-MoN_x (x∼0.5) by high-pressure-high-temperature synthesis. N atom site occupancies within the defect rock salt structure were determined from time-of-flight neutron diffraction and powder X-ray diffraction data by Rietveld analysis. The results show that N atoms occupy only octahedral sites within the structure. The semi-metallic compound is a superconductor, with determined by SQUID magnetometry. The compressibility of the material was determined by synchrotron X-ray diffraction measurements at high pressure in the diamond anvil cell. The vibrational density of states was studied by Raman scattering spectroscopy.     

Preparative isolation and purification of atractylon and atractylenolide III from the Chinese medicinal plant atractylodes macrocephala by high-speed counter-current chromatography

The medicinal plant Atractylodes macrocephala (Baizhu in Chinese) has been widely used in traditional Chinese medicine for energy and stomach complaints, treatment of dyspepsia and anorexia, anti-inflammation, anticancer and for increasing assimilation. A high-speed counter-current chromatography (HSCCC) method was developed for the preparative separation and purification of two main bioactive components, namely, atractylon and atractylenolide III from A. macrocephala by using light petroleum (60-90 degrees C)-ethyl acetate-ethanol-water (4:1:4:1 v/v) as the two-phase solvent system in dual-mode elution. Compared with the separation using the normal-mode elution, the dual-mode HSCCC can be achieved with shorter elution time. Atractylenolide III (32.1 mg) at 99.0% purity and 319.6 mg atractylon at 97.8% purity could be obtained from 1000 mg crude sample in a single run. The recoveries of atractylenolide III and atractylon were 95.4 and 92.6%, respectively.     

Comparative validation of amisulpride determination in pharmaceuticals by several chromatographic, electrophoretic and spectrophotometric methods

Depleted uranium (DU) is a by-product of the uranium enrichment process for nuclear fuel. According to the Commission Decision 2002/657/EC, a confirmatory method for the quantification of DU in freeze-dried fish was developed by isotope ratio dynamic reaction cell inductively coupled plasma-mass spectrometry (IR-DRC-ICP-MS). A preliminary study was performed to determine the following parameters: instrumental detection limit (IDL), isotopic ratio measurement limit (IRML), percentage of DU (P(DU)) in presence of natural uranium (NU) and limit of quantification (LoQ(DU)). The analyses were carried out by means of IR-DRC-ICP-MS. Ammonia was the reaction gas used for the dynamic reaction cell. In addition, a sector field inductively coupled plasma mass spectrometer (SF-ICP-MS) was employed to calculate the within-laboratory reproducibility. For the confirmatory method the following parameters were determined: (a) trueness; (b) precision; (c) critical concentrations alpha and beta (CC(alpha), CC(beta)); (d) specificity; (e) stability. Trueness was assessed by using the recovery tests. The recovery and within-laboratory reproducibility were determined by fortifying the blank digested solution of dogfish tissue: six aliquots were fortified at 1, 1.5 and 2 times the LOQ(DU) with 25.0, 37.5 and 50.0 ng L(-1) or 4.16, 6.24, 8.32 microg kg(-1) with a recovery of -8.2, +9.5 and +9.6%, respectively and a within-laboratory reproducibility (three analytical run) of 15.5, 8.0 and 11.0%, respectively. The results for the decision limit and the detection capability were: CC(alpha) = 11.69 ng L(-1) and CC(beta) = 19.8 ng L(-1). The digested solutions resulted to be stable during testing time (60 days) and the method can be considered highly specific as well.