Progress in the synthesis and applications of hierarchical flower-like TiO2 nanostructures

Flower-like TiO₂ materials, with their advantages of high specific surface area, developed pore structure, and high photocatalytic activity, have been widely used in environmental management and air purification, sterilization, and surface self-cleaning, among other areas. This paper summarizes several methods used to fabricate the flower-like TiO₂ nanostructures, such as the hydrothermal, solvothermal, microemulsion, sol–gel, hydrolysis, and electrodeposition oxidation methods. In addition, the morphologies, properties, and performance of different flower-like TiO₂ structures are discussed. Meanwhile, the application progresses of different flower-like TiO₂ structures are also analyzed.     

La distribution on the crater surface of W-1%La2O3 produced by a single laser pulse

The W-1%La₂O₃ alloy has been irradiated by a single laser pulse (λ = 1064 nm) to simulate transient thermal loads of high energy occurring in a tokamak under operative conditions. A zone with a diameter of ~2 mm, namely, much larger than the focal spot, results to be affected by the pulse, and a crater of about 300 μm is observed in its center. La₂O₃ particles are not present inside the crater. The change of surface morphology is accompanied by elemental redistribution. Multipoint XPS analysis evidenced that the concentration of La is very low in the crater and increases moving toward the border of the affected zone while that of W shows an opposite trend. The composition changes involve only the outmost 5 nm of the sample: through depth profiling, no differences of chemical composition were detected deeper in the alloy between the center and external border of the affected area.     

Collective risk models with dependence

In actuarial science, collective risk models, in which the aggregate claim amount of a portfolio is defined in terms of random sums, play a crucial role. In these models, it is common to assume that the number of claims and their amounts are independent, even if this might not always be the case. We consider collective risk models with different dependence structures. Due to the importance of such risk models in an actuarial setting, we first investigate a collective risk model with dependence involving the family of multivariate mixed Erlang distributions. Other models based on mixtures involving bivariate and multivariate copulas in a more general setting are then presented. These different structures allow to link the number of claims to each claim amount, and to quantify the aggregate claim loss. Then, we use Archimedean and hierarchical Archimedean copulas in collective risk models, to model the dependence between the claim number random variable and the claim amount random variables involved in the random sum. Such dependence structures allow us to derive a computational methodology for the assessment of the aggregate claim amount. While being very flexible, this methodology is easy to implement, and can easily fit more complicated hierarchical structures.     

Molecular insight into structures of monocationic and dicationic ionic liquids in mica slits

Structures of ionic liquids (ILs) 1-decyl-3-methylimidazolium bis(trifluoromethanesulfonyl)azanide ([C₁₀mim][TFSA]) and 1-decyl-dimethylimidazolium bis(trifluoromethanesulfonyl)azanide ([C₁₀(mim)₂](TFSA)₂) in different-sized mica slits have been investigated using molecular dynamics simulations. Ion density and angular distributions for monocationic IL [C₁₀mim][TFSA] were analysed to elucidate the IL structures under different surface charges and especially their changes in the direction perpendicular to the surfaces. [C₁₀mim][TFSA] formes in bilayers, compatible with existing models of ILs with long alkyl chains. For dicationic IL [C₁₀(mim)₂](TFSA)₂, cations adjacent to the mica surface tend to stay parallel to the surface with both positively charged rings absorbed. While near the centre of the slit, dications show the weak tendency of orientation distribution, more random than [C₁₀mim]⁺ ions. Structures of [C₁₀(mim)₂](TFSA)₂ cannot be described by bilayer models. Additionally, the in-plane arrangement of [C₁₀mim][TFSA] is more ordered when K⁺ ions completely neutralise the negative charge of the mica surface, and [C₁₀mim]⁺ ions tend to be located in hexagonal mica lattices with two aluminium atoms in replacement of silicon atoms. [TFSA]^? ions are constrained by the neighbouring K⁺ ions absorbed onto mica lattices.     

Emulsion Copolymerization of Vinyl Acetate and Vinyl Silanes: Kinetics and Development of Microstructure

The batch emulsion copolymerization of vinyl acetate with different vinyl silane functional monomers (vinyl trimethoxysilane [VTMS], vinyl triethoxysilane [VTES], and vinyl silanetriol [VSTO]) is studied. The nature of the silane strongly affects the development of the microstructure and crosslinking ability of the latexes. A combination of techniques (Soxhlet extraction, centrifugation, assymetric‐flow field flow fractionation AF4/MALS/RI) shows that the factor controlling the molar mass and crosslinking density is the degree of hydrolysis of the alkoxysilane, producing higher molar masses and degrees of crosslinking when the degree of hydrolysis is high. Thus, the copolymer containing VSTO produced a very crosslinked latex, the one with VTMS produced a latex with a low degree of crosslinking in the wet state that can yield high degrees of crosslinking upon drying, and the latex with VTES do not produce significant amounts of crosslinking neither before nor after drying.     

Controlled fabrication of hierarchically microstructured surfaces via surface wrinkling combined with template replication

In this paper,we present a simple method by combining surface wrinkling and template replication to create a series of hierarchical structures on polydimethylsiloxane(PDMS) elastomer.The primary stable lined patterns are formed by duplicating commercialized compact disk and digital versatile disk with PDMS.The secondary microscale patterns are from surface wrinkling,which is elicited by oxygen plasma(OP) treatment of the prestrained PDMS stamp followed with the prestrain release.By systematically varying the OP exposure duration,the prestrain,and the angle(θ) between the primary pattern orientation and the prestrain direction,we obtain highly ordered well-organized composite patterns from different patterning techniques and with different length scales and mechanical stabilities.     

Effect of cooling rate on microstructure of friction-stir welded AA1100 aluminum alloy

In this work, the microstructural changes occurring during cooling of friction-stir welded aluminum alloy AA1100 were evaluated. To this end, friction-stir welding (FSW) was performed in a wide range of cooling rates of 20–62 K/s and the evolved microstructures were studied by using electron backscatter diffraction. Below 0.6 T_m (T_m being the melting point), the stir zone material was found to experience no significant changes during cooling. At higher FSW temperatures, however, notable changes occurred in the welded material, including grain growth, sharpening of texture, reduction of the fraction of high-angle boundaries and material softening.     

Synthesis and characterization of iPP‐sPP stereoblock produced by a binary metallocene system

Stereoblock polypropylenes comprising of iPP and sPP segments are synthesized by polymerization of the following binary system of metallocenes: the C_s‐symmetric [2,7‐t‐Bu₂(Flu)₂Ph₂C(Cp)ZrCl₂] and the C₂‐symmetric rac‐Me₂Si(2‐Me‐4‐Ph‐Ind)₂ZrCl₂. Blends of samples made either by each catalyst individually (solution blend) with materials obtained with the mixed catalyst system (reactor blend) are compared. The simultaneous presence of MAO and DEZ, enhancing fast and reversible transfer of the growing chains between the two active centers, leads to the formation of a stereoblock microstructure. In this case, low molecular weight polymers are obtained. The junction between the blocks is qualitatively observed in ¹³C NMR. When made in toluene, the stereoblock material consists of a majority of syndiotactic sequences, whereas the ratio is more equilibrated when the polymerization was conducted in the more polar chlorobenzene. This is confirmed by the results obtained with ¹³C NMR, CRYSTAF, HT HPLC, DSC, SSA, WAXD, and optical microscopy. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1422–1434     

Solvent‐free inkjet printing process for the fabrication of conductive,transparent, and flexible ionic liquid‐polymer gel structures

A new and solvent‐free process for the fabrication of inkjet printed ionic liquid‐polymer gel microstructures with high‐resolution (line widths of ～40 μm), good electrical conductivity (5–30 mS cm^?1), optical transparency, and mechanical flexibility is presented. Carrying out the printing and polymerization process in nitrogen atmosphere eliminates the inhibiting influence of oxygen and guarantees homogeneously gelled structures. Careful selection and combination of ionic liquids (ILs) and unsaturated monomers makes it possible to achieve low viscosities which are printable with commercially available inkjet printers and printheads without adding extra solvents. By using different types and amounts of ILs and monomers the resulting properties of the printed IL‐polymer gels can be controlled in terms of ionic conductivity, optical transmission, and mechanical flexibility. Higher conductivities are possible by using a bifunctional instead of a monofunctional monomer, which allows one to lower the amount of monomer without loss in mechanical strength. Cast samples make it possible to obtain data of transmission (～90% for 170‐μm thick films) and mechanical flexibility (E = 0.02–0.23 MPa) of bulk material. Comparing electrical conductivity of printed and cast samples, the higher values of printed samples indicate the conductivity enhancing influence of moisture absorbed from the surrounding atmosphere after the fabrication process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Aggregation of clay platelets in nematic liquid crystal, 5CB: microstructure,electrical conductivity and rheological investigations

The microstructure, electrical conductivity and rheological properties of a nematic liquid crystal (5CB) doped at concentrations up to 4.5 wt% of montmorillonite (MMT) or organomontmorillonite (OMMT) clay nanoplatelets, were investigated at temperatures between 293 and 310 K. Microscopy and electrical conductivity assessment revealed noticeable differences in aggregation in MMT and OMMT suspensions, MMT nanoplatelets showing a strong tendency to aggregation. The incubation of 5CB in the presence of MMT initially produced loose aggregation, followed by the formation of compact aggregates. The latter had practically no influence on the surrounding inter-aggregate regions. In the case of OMMT, a greater degree of integration of the nanoplatelets was observed within the liquid crystal structure of 5CB, resulting in a noticeable effect on electrical conductivity and activation energy of the composite material. Thixotropy was observed in suspensions of 5CB composites formed with either MMT or OMMT. A composite of 5CB with OMMT also exhibited anomalous viscous thinning at shear rates below 100 s^?1. A structural model is suggested to explain this behaviour.