Using Taguchi Method to Determine the Optimum Conditions for Synthesizing Parapyruvate

The synthesis of parapyruvate is important for the analysis of the content in the pyruvate supplements and the study of aging-related neurodegenerative diseases. However, the pure parapyruvate crystal is not, as yet, commercially available. In this study, we applied the Taguchi’s L9 orthogonal array to investigate the optimal conditions for the preparation of the pure parapyruvate by the alkaline treatment of the pyruvic acid and then followed it with the solvent crystallization steps. We were also interested in revealing the major factors that affect the yield for the synthesized pure parapyruvate crystals. In addition, the parapyruvate-inhibited enzyme kinetic of α-ketoglutarate dehydrogenase complex (KGDHC) was also investigated. We found that the pure parapyruvate could be obtained in combination with an alkaline treatment and two solvent crystallization steps. The main factors affecting the yield of the pure parapyruvate were the concentration of the pyruvic acid (the reactant), the pH of the alkali treatment, the type of solvent used for the crystallization and the volume ratio of solvent used for crystallization. Finally, the optimal conditions could prepare parapyruvate crystals with a high purity of 99.8% and a high yield of 72.8%. In addition, the results demonstrate that parapyruvate is a reversibly competitive inhibitor for KGDHC.     

二极管阵列检测-流动注射分光光度法同时测定食品中铁铜钴

目的在于建立同时测定食品中铁、铜、钴三种微量元素的新方法。以2-(5-溴-2-吡啶偶氮)-5-二乙氨基酚(5-Br-PADAP)为显色剂,Triton X-100为增敏剂,采用流动注射-CCD二极管阵列检测-分光光度分析法同时对其进行测定。优化了实验参数,并用偏最小二乘法计算程序解析重叠光谱。结果显示,铁、铜和钴的线性范围分别为0.2～10 μg·mL-1,0.1～5.0 μg·mL-1,0.01～1.0 μg·mL-1,检出限分别为：0.2,0.1,0.01 μg·mL-1,进样频率为45样·h-1。所建方法用于茶叶、芝麻、小米等食品测定时,样品加标回收率分别为铁89.4%～102.3%、铜92.2%～108.0%、钴93.2%～110.8%,相对标准偏差为1.1%～12.1%。对国家一级标准参考物质茶叶和桃叶进行测定(ｎ＝8),结果在其给出的保证值范围之内。     

基于线阵InGaAs光电二极管阵列的光纤光栅传感解调

采用线阵InGaAs光电二极管阵列和体相位光栅并结合空分复用和波分复用技术,对光纤光栅传感进行解调.设计了基于线阵InGaAs光电二极管阵列和体相位光栅的光纤光栅传感解调系统,通过系统测试和性能分析,该解调系统解调带宽42 nm,信噪比30 dB,波长偏移测量精确度±15 pm,功率测量精确度为±0.3 dB.基于线阵InGaAs光电二极管阵列和体相位光栅的光纤光栅解调系统不但尺寸小,功耗低,而且具有较高的解调速度.     

阵列相关系数比对法在中药鉴别中的应用研究

中药材红外光谱具有“指纹”性,通过对红外特征吸收谱图的比对可达到区分和鉴别药材的目的。该研究用Visual Basic 6.0设计了中药材红外光谱阵列相关系数比对软件,建立了300多种中药药材的红外光谱数据库,将未知药材的红外光谱与数据库中药材的红外光谱进行比对,它能依11个波段两光谱相关系数的大小自动找到与库中最相似的光谱的药材,从而达到鉴别未知药材的目的。研究结果表明：在光谱数据库所包含的药材范围内,指定阵列相关系数的阈值,抓住特征波段光谱的比对,可避开CO₂和H₂O等外界因素对谱图的干扰,使比对结果准确可靠。该法有望成为中药材快速鉴别的一种常规手段。     

小孔阵列衍射特性与应用

以单色标量波衍射理论为基础,研究了均匀平面波从不同角度入射小孔阵列的衍射特性。运用单孔衍射理论,同时考虑相邻小孔间衍射光强的相互影响,建立了小孔阵列衍射的理论模型和光强分布的数值积分式,小孔为硬边小孔。利用Matlab对500 nm波长的平面波入射微小方孔阵列衍射图样进行了计算机仿真,得到了不同几何参量下平面波从不同角度入射时的衍射图样的一维和二维光强分布图,并将仿真结果用于微型数字式太阳敏感器的光学系统中的结构参量设计和图像处理中的参量确定。太阳敏感器的成像实验结果表明,小孔阵列衍射光强分布图的仿真结果正确、太阳敏感器光学系统参量设计合理。小孔阵列衍射理论为太阳敏感器的光学系统设计和图像处理提供了可靠的理论基础。     

机车轮对轴颈高精度动态检测技术的研究

通过对线阵CCD成像系统的研究,提出了机车轮对轴颈磨损的CCD成像拼接动态检测方法,分析了该方法的可行性.讨论了斜光束照射、背景光强变化等因素,这些因素降低了系统的测量精度.最后通过实验系统证明了该方法的可靠性.     

模板法组装纳米有序阵列的研究进展

由金属、半导体、碳纳米管、聚苯胺等组成的纳米有序阵列体系,在能量存储或转换、传感等方面具有广阔的应用前景。模板法组装纳米有序阵列体系是以具有特定微孔结构的材料为模板,通过电化学沉积、溶胶-凝胶沉积和化学气相沉积等手段,让纳米单元在模板提供的受控环境中原位生成,形成纳米有序阵列体系。模板法具有可控性好、工艺简便、能耗低等优点。本文综述了模板法组装纳米有序阵列体系的研究进展,并对纳米有序阵列体系的应用前景作了展望。     

Quantum Switchboard with Coupled-Cavity Array

The ability to control the flow of quantum information is deterministically useful for scaling up quantum computation. In this paper, we demonstrate a controllable quantum switchboard which directs the teleportation protocol to one of two targets, fully dependent on the sender’s choice. Importantly, the quantum switchboard also acts as a optimal quantum cloning machine, which allows the receivers to recover the unknown quantum state with a maximal fidelity of 56. This protects the system from the complete loss of quantum information in the event that the teleportation protocol fails. We also provide an experimentally feasible physical implementation of the proposal using a coupled-cavity array. The proposed switchboard can be utilized for the efficient routing of quantum information in a large quantum network.     

反相高效液相色谱二极管阵列检测器对戊四硝酯粉质量的研究

建立了戊四硝酯粉含量及有关物质的RP-HPLC测定法。采用ODS色谱柱,甲醇/水(70∶30)为流动相,使戊四硝酯与有关物质基线分离,二极管阵列检测器检测波长206nm。本方法操作简便,重现性好。     

曲面相机阵列多分辨成像方法

针对现有成像系统因数据冗余而无法兼顾大视场、高分辨、高效性的问题,结合人眼视网膜变分辨成像和并列式复眼成像原理,设计一种多分辨率成像的复合仿生成像系统.该成像系统按照球面和平面兼顾的曲面布局方式,利用11个相机镜头构建相机阵列,组成了四个等级分辨率的子眼拍摄模块.通过物距100 m的远景实验和物距10 m的近景实验发现,该系统在实现高分辨成像的同时,获得总视场达150.8°×37.8°.多分辨率成像实验结果表明,该系统获取的图像的分辨率从中心视场到边缘视场逐渐降低,并且相较于中心清晰全视场成像,四级分辨率成像的拼接图像数据量减少了17.2倍的数据冗余.