Theoretical Study on the Isomerization Mechanism of Enol Ester from 2-Acyl-1, 3-cyclohexanediones

The present paper employed density function theory to investigate two reaction pathways for isomerization of enol ester proposed by Yang(path a) and the present authors(path a), respectively. The base catalytic effects of solvent triethylamine on these two reactions were also evaluated. It is demonstrated that path B is more preferable than path a due to low barrier height for the rate-determining step.     

An efficient and solvent-free one-pot synthesis of dihydropyrimidinones under microwave irradiation

An efficient synthesis of 3,4-dihydropyrimidin-2(1H)-one derivatives using formic acid as catalyst, from aldehydes,β-ketoester and urea(thiourea) without solvent under the irradiation of microwave is described. Compared with the classical Biginelli reaction, this new method has the advantage of good yields (77-94% for aromatic aldehydes) and short reaction time (3-8 min).     

Phosphomolybdic acid-catalyzed efficient one-pot three-component aza-Diels-Alder reactions under solvent-free conditions: a facile synthesis of trans-fused pyrano- and furanotetrahydroquinolines

trans-Fused pyrano- and furanotetrahydroquinoline derivatives have been synthesized via a one-pot three-component aza-Diels-Alder reaction of aryl imines formed in situ from aromatic amines and arylaldehydes with cyclic enol ethers,such as 3,4-dihydro-2H-pyran and 2,3-dihydrofuran,in the presence of 1 mol % of phosphomolybdic acid under solvent-free conditions at room temperature in good to excellent yields.     

Surface cavities produced by high‐dose nitrogen ion implantation into silicon

Nitrogen ion implantation (24 keV, 4.6 × 10¹⁷ cm^?2) into (100) a p‐type silicon wafer material and a subsequent electron beam annealing at 1100 °C for 15 s under high vacuum conditions leads to the formation of an uneven surface in the implanted region caused by nitrogen bubbles beneath the surface. Annealing at 1200 °C for 300 s results in surface cavities with a mean diameter of 350 nm and a surface coverage of 3–4% and an average depth of ～60 nm. Nuclear reaction analysis reveals that the nitrogen concentration in the as‐implanted state exceeds 57 at%, the value of stoichiometric Si₃N₄. Annealing at 1100 °C for 15 s slightly reduces the nitrogen peak concentration, whereas annealing at 1200 °C for 300 s induces a significant alteration to the shape of the nitrogen depth profile coupled with the lowering of the concentration close to the stoichiometry of Si₃N₄. The results present a new method of producing sub‐micrometre cavities embedded in a thin silicon nitride film on wafer silicon which may lead to novel micro‐electronic and biotechnology applications. Copyright © 2007 John Wiley & Sons, Ltd.     

Improvement on Simultaneous Determination of Cr(III) and Cr(VI) by Capillary Electrophoresis and Chemiluminescence Detection

Chromiumexistsindifferentoxidationstatesingroundwater,industrialwastewater,seawater,andsoilofourenvironment1,2.Chromium(III)isanessentialtraceelementforhumans,requiredforthemaintenanceofnormalglucose,cholesterol,andfattyacidmetabolism.Ontheotherhand,watersolublechromium(VI),intheformCr2O72-orCrO42-,ishighlyirritatingandtoxictohumansandanimals3.Itsacutetoxiceffectsincludeanimmediatecardiovascularshockandlatereffectsonkidney,liver,andblood-formingorgans.Therefore,itisnecessaryforriskassessme…     

Methylene‐Bridged Metallocenes with 2,2′‐Methylenebis[1H‐inden‐1‐yl] Ligands: Synthesis,Characterization, and Polymerization Catalysis of a Synthetically Simple Class of C2‐ and C2v‐Symmetric ansa‐Metallocenes

The acid‐catalyzed reaction between formaldehyde and 1H‐indene, 3‐alkyl‐ and 3‐aryl‐1H‐indenes, and six‐membered‐ring substituted 1H‐indenes, with the 1H‐indene/CH₂O ratio of 2 : 1, at temperatures above 60° in hydrocarbon solvents, yields 2,2′‐methylenebis[1H‐indenes] 1 – 8 in 50–100% yield. These 2,2′‐methylenebis[1H‐indenes] are easily deprotonated by 2 equiv. of BuLi or MeLi to yield the corresponding dilithium salts, which are efficiently converted into ansa‐metallocenes of Zr and Hf. The unsubstituted dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 1′ )]) is the least soluble in organic solvents. Substitution of the 1H‐indenyl moieties by hydrocarbyl substituents increases the hydrocarbon solubility of the complexes, and the presence of a substituent larger than a Me group at the 1,1′ positions of the ligand imparts a high diastereoselectivity to the metallation step, since only the racemic isomers are obtained. Methylene‐bridged ‘ansa‐zirconocenes’ show a noticeable open arrangement of the bis[1H‐inden‐1‐yl] moiety, as measured by the angle between the planes defined by the two π‐ligands (the ‘bite angle’). In particular, of the ‘zirconocenes’ structurally characterized so far, the dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[4,7‐dimethyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 5′ )] is the most open. The mixture [ZrCl₂( 1′ )]/methylalumoxane (MAO) is inactive in the polymerization of both ethylene and propylene, while the metallocenes with substituted indenyl ligands polymerize propylene to atactic polypropylene of a molecular mass that depends on the size of the alkyl or aryl groups at the 1,1′ positions of the ligand. Ethene is polymerized by rac‐dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1‐methyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 2′ )])/MAO to polyethylene waxes (average degree of polymerization ca. 100), which are terminated almost exclusively by ethenyl end groups. Polyethylene with a high molecular mass could be obtained by increasing the size of the 1‐alkyl substituent.     

Theoretical study of CH…O hydrogen bond in proton transfer reaction of glycine

Density functional theory (DFT) calculations are used to study the strength of the CH…O H‐bond in the proton transfer reaction of glycine. Comparison has been made between four proton transfer reactions (ZW1, ZW2, ZW3, SCRFZW) in glycine. The structural parameters of the zwitterionic, transition, and neutral states of glycine are strongly perturbed when the proton transfer takes place. It has been found that the interaction of water molecule at the side chain of glycine is high in the transition state, whereas it is low in the zwitterionic and neutral states. This strongest multiple hydrogen bond interaction in the transition state reduces the barrier for the proton transfer reaction. The natural bond orbital analysis have also been carried out for the ZW2 reaction path, it has been concluded that the amount of charge transfer between the neighboring atoms will decide the strength of H‐bond. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

High-intensity ultrasound and microwave, alone or combined, promote Pd/C-catalyzed aryl-aryl couplings

Pd-catalyzed homo- and cross-couplings of boronic acids and aryl halides were successfully carried out both in aqueous media under high-intensity ultrasound (US) and in DME under microwave (MW). Heterogeneous catalysis with Pd/C was employed, avoiding phosphine ligands and phase-transfer catalysts. In a trial series involving 15 different iodo- and bromoaryls and 7 boronic acids, both energy sources drastically reduced reaction times affording biaryls in acceptable to good yields. With palladium(II) acetate as catalyst, electron-deficient aryl chlorides also reacted, affording a few biaryls in acceptable yields. Ullmann-type zinc-mediated homocoupling of iodo- and bromoaryls in the presence of Pd/C under CO₂ atmosphere was achieved in aqueous media under US, though not under MW. Suzuki homo- and cross-couplings were also carried out in a new reactor developed in our laboratory, featuring combined US and MW irradiation, further improving a green synthetic method.     

γ-Fe2O3纳米粉的低热固相制备及其电磁损耗特性(英)

The Fe(OH)₃ precursor was prepared by solid -state reaction with Fe(NO₃)₃·9H₂O, NaOH and dispersed poly-ethylene glycol at low heating temperature(25 ℃). Synthesis of iron oxide (γ-Fe₂O₃) nanoparticle was achieved by thermal decomposition of Fe(OH)₃·xH₂O precursor. The nanoparticle was characterized by TG-DTA, X-ray diffra-ction, TEM etc. The results showed that the nanoparticle was composed of γ-Fe₂O₃ and was a better absorber for electromagnetic wave within the low frequency band.     

Fluoride-induced nucleophilic (phenylthio)difluoromethylation of carbonyl compounds with [difluoro(phenylthio)methyl]trimethylsilane (TMS-CF2SPh)

A fluoride-induced nucleophilic (phenylthio)difluoromethylation method using TMS-CF₂SPh has been achieved. This new methodology efficiently transfers “PhSCF₂” group into both enolizable and non-enolizable aldehydes and ketones to give corresponding (phenylthio)difluoromethylated alcohols in good to excellent yields. Diphenyldisulfide can also be (phenylthio)difluoromethylated into PhSCF₂SPh in high yield. The reaction with methyl benzoate, however, gives only low yield of (phenylthio)difluoromethyl phenyl ketone. The above-obtained PhSCF₂-containing alcohols can be further transformed into difluoromethyl alcohols using an oxidation-desulfonylation procedure. This new type of nucleophilic (phenylthio)difluoromethylation methodology may have other potential applications in the medicinal and agrochemical fields.