Absorption and Capture of Methane into Ionic Liquid

A reversible storage-release process switched by a temperature difference of 10℃around room temperature can be realized. This fast, recyclable, energy efficient, low cost and green system within a wide range of temperature and pressure is reported here for the first time. The system is believed to open up a new route for the storage and homogeneous utilization of methane.     

离子液体［bmim］HSO4中合成的苯胺与环氧丙烷共聚物的电催化性能

 采用恒电流电解法,在1-丁基-3-甲基咪唑硫酸氢盐(［bmim］HSO4)离子液体中合成了苯胺与环氧丙烷共聚物(PAN-PPO). 扫描电镜观察表明, PAN-PPO由直径小于80 nm的纳米纤维组成. PAN-PPO对草酸氧化具有较好的电催化活性. 采用电化学原位红外光谱技术对草酸的电催化氧化进行了简单的分析.     

Second Dissociation Constants of 4-[N-morpholino]butanesulfonic Acid and N-[2-hydroxyethyl]piperazine-N′-4-butanesulfonic Acid from 5 to 55°C

The values of the second dissociation constant, pK ₂, for the dissociation of the NH⁺ charge center of the zwitterionic buffer compounds 4-(N-morpholino)butanesulfonic acid (MOBS), and N-(2-hydroxyethyl)piperazine-N-4-butanesulfonic acid (HEPBS) have been determined from 5 to 55°C, including, 37°C at intervals of 5°C. The electromotive-force (emf) measurements have been made utilizing hydrogen electrodes and silver–silver chloride electrodes. The value of pK ₂ for MOBS was found to be 7.702 ± 0.0005, and 8.284 ± 0.0004 for HEPBS, at 25°C, respectively. The related thermodynamic quantities, G ^o, H ^o, S ^o, and C _p ^o for the dissociation processes of MOBS and HEPBS have been derived from the temperature coefficients of pK ₂. Both the MOBS and HEPBS buffer materials are useful as primary pH standards for the control of pH 7.3 to 8.6 in the region close to that of physiological fluids.     

Alkylation of benzene with 1-hexene in acidic ionic liquid systems: Et3NHCl-FeCl3and Et3NHCl-AlCl3ionic liquids

Summary The alkylation of benzene with 1-hexene has been investigated in different triethylamine hydrochloride-ferric chloride (Et₃NHCl-FeCl₃) and triethylamine hydrochloride-aluminium chloride (Et₃NHCl-AlCl₃) ionic liquids. Both high catalyst activity and monoalkylation selectivity were observed for these two type of ionic liquids. Systems prepared by modification with HCl in Et₃NHCl-FeCl₃ionic liquids prove to be very suitable solvents and catalysts for the reaction. When employing Et₃NHCl-AlCl₃ionic liquids as catalysts, the reaction takes place in biphasic mode with facile catalyst separation and catalyst recycling.     

离子液体在导电高分子中的应用

综述了离子液体作为介质，在导电高分子合成及其电化学性能测试，以及导电高分子电化学器件中（电化学电容、发光电化学池、驱动器、太阳能电池）的最新研究进展。在此基础上。展望了离子液体在导电高分子中的应用前景。     

DFT Study on the Structure of Ionic Liquid 1-Ethyl-3-methylimidazolium Hexafluorophosphate

1 INTRODUCTION Ionic compounds generally have high melting points and always exist in solid state since they are main- tained by electrovalent bonds. Ionic Liquids (ILs), which are liquids at or near ambient temperature, have been a class of ionic compounds extensively studied experimentally and theoretically in recent years[1, 2]. ILs consist exclusively of anions and ca- tions and do not contain any neutral molecule. They have many attractive properties, such as low vapor pressure, no…     

Potentiometric measurements of the first hydrolysis quotient of magnesium(II) to 250°C and 5 molal ionic strength (NaCl)

The first molal hydrolysis quotient, Q_1.1, of Mg²⁺ was measured potentiometrically from 1 to 250°C at ionic strengths of 0.11, 0.31, 1.01, and 5.0 mol-kg^-1 in an aqueous NaCl medium using a hydrogen-electrode, concentration cell. Only hydrolysis of the first four percent of the magnesium in solution could be followed before precipitation of brucite, Mg(OH)₂(cr), occurred. The log Q_1.1 values were fitted as a function of temperature and ionic strength using four adjustable parameters. The resulting constants are compared with the limited existing low temperature data. At infinite dilution and 25°C the following quantities are reported: logK _1.1 = -11.68±0.05, †H_so = 70.1±1.2 kJ-mol^-1, †S^o = 11±4 J-K^-1-mol^-1, and †C _p ^o = 0 J-K^-1-mor^-1. At each ionic strength, including the values extrapolated to infinite dilution, the heat capacity change for the hydrolysis reaction was zero,i.e., logQ _1.1 was found to be a linear function of the reciprocal temperature in Kelvin, at least over the measured range of l-250°C. The hydrolysis constants at infinite dilution were modeled to 550°C and two kbar pressure with a function incorporating solvent density using published results obtained at these extreme conditions.     

Incorporating the effect of ionic strength in free energy calculations using explicit ions

The incorporation of explicit ions to mimic the effect of ionic strength or to neutralize the overall charge on a system in free energy calculations using molecular dynamics simulations is investigated. The difference in the free energy of hydration between two triosephosphate isomerase inhibitors calculated at five different ion concentrations is used as an example. We show that the free energy difference can be highly sensitive to the presence of explicit ions even in cases where the mutation itself does not involve a change in the overall charge. The effect is most significant if the molecule carries a net charge close to the site mutated. Furthermore, it is shown that the introduction of a small number of ions can lead to very severe sampling problems suggesting that in practical calculations convergence can best be achieved by incorporating either no counterions or by simulating at high ionic strength to ensure sufficient sampling of the ion distribution.     

Dynamically coating the capillary with 1-alkyl-3-methylimidazolium-based ionic liquids for separation of basic proteins by capillary electrophoresis

Ionic substances with melting points close to room temperature are referred to as ionic liquids. Because ionic liquids are environmentally benign and are good solvents for a wide range of both organic and inorganic materials, interest for their potential uses in different chemical processes is increasing. In this paper, a capillary electrophoretic method for the analysis of basic proteins including lysozyme, cytochrome c, trypsinoge, and α-chymotyypsinogen A is reported. The method, in which 1-alkyl-3-methylimidazolium-based ionic liquids are used as the running electrolytes, leads to a surface charge reversal on the capillary wall. The effects of the alkyl group, imidazolium counterion, and the concentration of the ionic liquids were discussed. The optimum buffer system was a 90 mM 1-ethyl-3-methylimidazolium tetrafluoroborate (1E-3MI-TFB) solution. The applied voltage was −15 kV and detection was performed by monitoring absorbance at 240 nm. Baseline separation, high efficiencies, and symmetrical peaks of four proteins were obtained. The R.S.D. values of migration times and peak areas were <0.68 and <3.0%, respectively. The separation mechanism seems to involve association between the imidazolium cations and the proteins.