平均值组合评价方法的优良性研究

综合评价方法广泛应用于教育、管理等很多领域.在一定程度上可以说综合评价的结果是决策的基础.因此选用好的综合评价方法非常重要.提出了一种新的综合评价方法:平均值组合评价方法.这种方法在一定程度上克服了单一综合评价方法的片面性.研究结果还表明所提的平均值组合评价方法在平方损失函数和兼容度两种标准下具有优良性.     

Complementary energy principle for large elastic deformation

Using the “base forces” as the fundamental unknowns to determine the state of an elastic system, the complementary energy principle for large elastic deformation is constructed for the conjugate quantities being displacement gradients, which possesses exactly the same form as that of classical linear elasticity. It is revealed that the complementary energy contains deformation part and rotation part.     

羟乙基壳聚糖的合成及其与聚乳酸的相容性

本文以异丙醇为溶剂,碱化壳聚糖与2-氯乙醇反应制备了羟乙基壳聚糖,对产物的结构与性能进行了分析表征;然后以二甲基亚砜为溶剂,采用溶液共混法制备了一系列不同组成的壳聚糖/聚乳酸和羟乙基壳聚糖/聚乳酸复合膜,对两组分间的相容性进行了研究。结果表明,羟乙基化反应在-OH和-NH2上均有发生,壳聚糖单元糖环上的羟乙基取代度为2.46;改性后,壳聚糖结晶性能和起始热分解温度下降,溶解性能得到改善。复合膜的电镜结果显示,在壳聚糖/聚乳酸复合膜中,相分离现象显著存在,壳聚糖在聚乳酸基体中的分散不均匀,有团聚现象,随着壳聚糖含量增加,两组分间的相分离程度增大,团聚现象更为严重,当壳聚糖含量达到50%时,已难以制备完整的复合膜;与之相反,羟乙基壳聚糖/聚乳酸复合膜中两种组分之间的相容性有所改善,相分离现象不明显,并且,当羟乙基壳聚糖含量从10%增加到50%,复合膜中两种组分之间的相容性变化不大。     

羟基磷灰石/聚乳酸微粒复合生物支架的体外细胞相容性评价

利用溶液共混法以及溶剂挥发法制备了羟基磷灰石(Nano-HA)/聚乳酸(PLA)微粒,再粘结微粒加工成三维多孔Nano-HA/PLA微粒复合生物支架。借助相差显微镜、扫描电子显微镜和MTT法检测了鼠骨髓基质细胞(BMSCs)在该支架材料上的生长情况,通过细胞形态学观察和细胞增殖情况评价了该复合生物支架材料的生物相容性。结果表明,SEM观察到支架材料上培养细胞4d后,细胞主要附着、铺展在支架的低洼处或孔洞处表面,并向孔洞深部沿壁生长;在支架材料上培养细胞8d后,细胞多为梭形形态,并有许多生长角,直接贴附于支架的微粒表面,开始连片生长,有明显的增值,各组没有变形、坏死现象。支架材料上培养细胞2,3,4,5,6和8d的MTT检测表明,各实验组RGR均达到100%以上,细胞毒性为0级;细胞在支架材料上的生长曲线显示,实验组细胞活力比对照组高26%。因此,该Nano-HA/PLA微粒复合生物支架没有细胞毒性,并对细胞有良好的粘附和增殖能力,为较具潜力的骨修复材料。     

自然电位测井的数学模型

自然电位测井是石油开发中一种常用而重要的测井方法。自然电位函数的数学模型可归结为具有间断交界面条件的椭圆型等位面边值问题,在交界面交汇点处,自然电位的跳跃通常不满足相容性条件,此时,这个边值问题不存在分块H1*解,不能使用有限元素法直接求解。本文介绍这一测井方法的数学模型及数值求解方法。     

Compatible and tearing properties of poly(lactic acid)/poly(ethylene glutaric‐co‐terephthalate) copolyester blends

Fourier transform infrared and nuclear magnetic resonance results suggest that the carboxylic acid groups of poly(lactic acid) (PLA) molecules react with the hydroxyl groups of FePol (FP) molecules during the melt‐blending of PLA_xFP_y specimens. Differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) experiments of PLA and PLA/FP specimens suggest that only small amounts of poor PLA and/or FP crystals are present in their corresponding melt crystallized specimens. In fact, the percentage crystallinity, peak melting temperature, and onset re‐crystallization temperature values of PLA/FP specimens reduce gradually as their FP contents increase. However, the glass transition temperatures of PLA molecules found by DSC and DMA reduce to a minimum value as the FP contents of PLA_xFP_y specimens reach 6 wt %. Further DMA and morphological analysis of PLA/FP specimens reveal that FP molecules are compatible with PLA molecules at FP contents equal to or less than 6 wt %, as no distinguished phase‐separated FP droplets and tan δ transitions were found on fracture surfaces and tan δ curves of PLA/FP specimens, respectively. In contrast to PLA, the FP specimen exhibits highly deformable and tearing properties. After blending proper amounts of FP in PLA, the inherent brittle deformation and poor tearing behavior of PLA were successfully improved. Possible reasons accounting for these interesting crystallization, compatible and tearing properties of PLA/FP specimens are proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 913–920, 2010     

Alkyl side chain length dependent compatibility of poly(4‐n‐alkylstyrene)s and 1,4‐rich polyisoprene blends

We investigated the compatibility of blends of 1,4‐rich polyisoprene (1,4‐PI) and poly(4‐n‐alkylstyrene)s with six kinds of n‐alkyl side groups, that is, methyl, ethyl, propyl, butyl, hexyl, and octyl focusing on carbon number of alkyl groups. Poly(4‐methylstyrene)/1,4‐PI blend was turned out to be immiscible at all temperature range adopted in this work and poly(4‐ethylstyrene)/1,4‐PI blend revealed UCST type phase behavior, while the others were found to be compatible. The phase diagrams of poly(4‐ethylstyrene)/1,4‐PI blends were obtained by optical microscopy, and the temperature dependence of the Flory‐Huggins interaction parameter χ has been estimated to be χ = ?0.036 + 24/T by applying lattice theory, where T is the absolute temperature. From this relationship χ value at room temperature (298 K) was calculated to be 0.045, the value is reasonably low for miscible polymers system. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1791–1797     

Dynamic Scheduling on a Single Batch Processing Machine with Split Compatibility Graphs

We consider the problem of minimizing the makespan on a batch processing machine, in which jobs are not all compatible. Only compatible jobs can be included into the same batch. This relation of compatibility is represented by a split graph. Jobs have release dates. The capacity of the batch processing machine is finite or infinite. The processing time of a batch is given by the processing time of the longest job in the batch. We establish the NP-hardness of the general problem and present polynomial algorithms for several special cases. Relating scheduling theory and graph theory appears to be an interesting and important concept.     

Synthesis and morphology of polyethylene‐block‐poly(methyl methacrylate) through the combination of metallocene catalysis with living radical polymerization

Polyethylene‐block‐poly(methyl methacrylate) (PE‐b‐PMMA) was successfully synthesized through the combination of metallocene catalysis with living radical polymerization. Terminally hydroxylated polyethylene, prepared by ethylene/allyl alcohol copolymerization with a specific zirconium metallocene/methylaluminoxane/triethylaluminum catalyst system, was treated with 2‐bromoisobutyryl bromide to produce terminally esterified polyethylene (PE‐Br). With the resulting PE‐Br as an initiator for transition‐metal‐mediated living radical polymerization, methyl methacrylate polymerization was subsequently performed with CuBr or RuCl₂(PPh₃)₃ as a catalyst. Then, PE‐b‐PMMA block copolymers of different poly(methyl methacrylate) (PMMA) contents were prepared. Transmission electron microscopy of the obtained block copolymers revealed unique morphological features that depended on the content of the PMMA segment. The block copolymer possessing 75 wt % PMMA contained 50–100‐nm spherical polyethylene lamellae uniformly dispersed in the PMMA matrix. Moreover, the PE‐b‐PMMA block copolymers effectively compatibilized homopolyethylene and homo‐PMMA at a nanometer level. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3965–3973, 2003