New perylene polyimides containing p‐n diblocks for sensitization in TiO2 solar cells

Three novel perylene polyimides (PPIs) containing p‐n diblock units were designed and synthesized for use in dye‐sensitized mesoporous TiO₂ solar cells. They all dissolve in m‐cresol and N‐methyl‐2‐pyrrolidone (NMP). Their visible light absorption, electrochemical and photoelectrochemical properties were systematically studied. The polyimides have band gap energies of 2.16, 2.19 and 2.25 eV deduced from ultraviolet–visible absorption spectra, and electron affinity (E_a) and ionization potential (IP) of ?3.93 and 6.10 eV for PPI1, ?3.94 and 6.13 eV for PPI2, ?3.93 and 6.59 eV for PPI3, respectively, deduced from cyclic voltammogram. Experimental data show that introduction of 4,4′‐bisaminetriphenylamine cannot only greatly enhance optic‐electro conversion efficiency, but also enhance the dissolubility which in favorable for making the devices. The relationship of structure and properties of PPI is discussed and the mechanism of photocurrent generation is explained. Copyright © 2004 John Wiley & Sons, Ltd.     

Analysis of basic hair dyes by HPLC with on-line post-column photochemical derivatisation

Summary A reversed phase liquid chromatographic method is proposed for the analysis of basic hair dyes (raw materials and colourant formulations). The performance of the method was enhanced by introducing post-column on-line photochemical derivatisation in combination with a Diode Array Detector. On-line photoderivatisation provided an effective way of selectively transforming the analytes to compounds with different spectral properties. For each analyte two characteristic UV-Visible spectra (photoreactor on and off) were obtained with the same mobile phase and this information in combination with the chromatographic data (k' at pH 3.0 and 4.5) enabled the unambiguous identification of both commonly used, approved, and banned basic hair dyes. Additionally, this approach was found useful to improve the method sensitivity, allowing the determination of analytes present in low concentration (0.03%) in complex commercial formulations.This work constitutes part of the thesis for the Dottorato di Ricerche of Roberto Gotti.     

Preparation of lucifer yellow fluorescent liposomes: A method for cells' membrane labeling

This report describes a method to conjugate lucifer yellow to the external surface of liposomes. The heterobifunctional cross-linking reagentN-succinimidyl 3-(2-pyridyldithio)propionate has been used to activate DMPE molecules. The DMPE-dithiopyridine product has been mixed with DMPC to prepare liposome vesicles. These have been reduced by DTT and finally reacted with lucifer yellow-iodoacetamide to produce the fluorescence-labeled vesicles. The quenching of their fluorescence intensity by Kl is consistent with fully exposed fluorophores. The decay of the fluorescence intensity of the lipid-bound lucifer yellow is biexponential (₁=7.9 ns; ₂=1.1 ns), with a relative yield of 0.16. When the fluorescent liposomes are mixed with cells, the lucifer yellow-DMPE derivative is transferred. Boar spermatozoa and peripheral human blood lymphocytes have been used as cellular models. The extent of incorporation is dependent on the incubation time and temperature. At 36°C, lucifer yellow fluorescence appears in the spermatozoa cells after 10 min of incubation and reaches its maximum at about 60 min. The fluorescent phospholipid derivative seems to incorporate specifically into membrane structures. The highest labeling ratio is observed with integer, scarcely motile, spermatozoa. A poorer labeling yield (15%) is found with lymphocytes. Interestingly, photobleaching due to epiillumination of the labeled cells is apparently negligible and cells are clearly visible after irradiation times ranging from several minutes to few hours.A preliminary account of this work was presented at the Quarto Simposio su Biotecnologie Biochimiche, Capri, 28–30 June 1992.     

Copolymers of methyl methacrylate with some benzanthrone dyes, photo-stabilisers and their combined structures

Copolymerisation of methyl methacrylate with nine novel monomer compounds, triazinyl benzanthrone dyes, triazinyl benzotriazole stabilisers and their combined structures, was investigated. Chemical bonding of the compounds in the polymers obtained was confirmed spectrophotometrically. The quantity of the chemically bonded monomer compounds was determined to be over 50%, providing a colour and a fluorescence stable to solvents. Their influence on the rate of the copolymerisation was studied. It was found that the compounds under study did not significantly affect the rate of copolymerisation. A stabilizing effect towards photo-degradation of PMMA was achieved at 0.1 wt.% initial concentration of the compounds, which made them suitable for “one-step” colouration and stabilisation of PMMA.     

Enhancing the organic dye adsorption on porous xerogels

We investigate the adsorption of four different organic dyes (i.e., methyl orange, alizarin red S, brilliant blue FCF, and phenol red) on porous xerogels. To understand the factors affecting the adsorption capacity of the xerogels, we vary the hydrophobicity and the textural properties of the xerogels as well as the solution pH. We control the hydrophobicity by mixing two different precursors (i.e., vinyltriethoxysilane (VTES) and tetraethoxysilane (TEOS)) and the textural properties by using cetyltrimethylammonium bromide (CTAB) as a templating agent. We find that the adsorption capacity is enhanced as the organic/inorganic hybrid xerogel or the templated xerogel is used instead of the purely inorganic or the untemplated xerogel. In all the cases studied, adsorption decreases as the pH is increased due to the electrostatic repulsion between the dyes and the xerogel surface. We find that both the hydrophobic surface and larger pore size/volume are required to enhance the adsorption capacity significantly.     

偶氮染料在酸性介质中的电还原性质

研究了4个偶氮染料在酸性介质中的电还原性质。偶氮基在酸性介质中的还原均为不可逆四电子一步全还原。邻、对位上有吸电子基(如—CO_2Bu-n)的偶氮基较间位有吸电子基时更易被还原。分子中同时含有偶氮基和硝基时,偶氮基先被还原。     

冠醚菁染料及其中间体的特征红外光谱

本文首次报道冠醚菁染料3,3’-二乙基-5,6,5’,6’-双骈-(15-冠-5)-硫碳菁碘盐(1)和3,3’-二乙甲基-5,6-骈-(15-冠-5)-硫碳菁碘盐(2)以及合成中间体:4’-溴5’-硝基-苯骈-15-冠-5(3),2.2’-二硝基-4,5,4’,5’-双骈-(15-冠-5)-二本基二硫化物(4),2-甲基-5,6-骈-(15-冠-5)-苯骈噻唑(5)和2-甲基-3-乙基-5,6-骈-(15-冠-5)-苯骄噻唑碘盐(6)的特征红外光谱图。     

光催化降解染料ZnO催化剂的性能

光催化法是20世纪70年代发展起来的新型水处理技术，即以某些半导体材料为催化剂，利用光催化法来降解环境污染物。该方法工艺简单，成本较低，在常温下能使大多数不能或难于生物降解的有毒有机物彻底氧化分解。近年来研究最多的是TiO2，由于其带隙较宽(3．2eV)，只能吸收波长λ≤387nm的紫外光，因此研制新型光催化剂仍是重要课题。     

Physicochemical and Cytochemical Investigations on the Binding of Ethidium and Acridine Dyes to DNA and to Organelles in Living Cells

Ethidium and acridine dyes are classical model substances for studying the binding of small, pharmacologically active molecules to DNA. Intercalation between the DNA base pairs is nearly always proposed as the most important type of binding. According to our investigations, however, there is a second type of binding, which also occurs when the concentration of the bound molecules is low and will be referred to here as external or preintercalative binding. The experimental binding isotherms show that the binding constant for intercalation K_S1 is considerably smaller than that for external binding K_S2 (K_S1 > K_S2). This surprising result is not due to the binding enthalpy (ΔH ≈ ΔH) but to the binding entropy (ΔS > ΔS). Electrostatic interactions between the dye and the DNA represent the most important contribution to both types of binding; they are supplemented by hydrogen bonds and hydrophobic interactions. The behavior of a substance in living cells, however, cannot be reliably predicted from its in vitro binding to DNA. Very few substances are bound to the DNA of the nuclear chromatin in cell culture; for example, dyes often accumulate instead in the lysosomes. In some cases the dye binds specifically and very efficiently to the mitochondria of the living cell, especially to the mitochondrial membranes, the sites of oxidative phosphorylation.     

氢化物发生—分光光度法测定染发剂中的微量铅

本文提出了用铁氰化钾将铅氧化至高价,再用氢化物发生-分光光度法测定铅的一种新方法。该法灵敏度高,简便快速,用于分析染发剂中的铅,取得了较好的效果。