ICP-MS determination of heavy metals in submerged cultures of wood-rotting fungi

Accumulation of five heavy metal ions by five species of wood-rotting basidiomycetes during a 9-day cultivation was studied. Contents of Cd, Cu, Pb, and Zn were measured using ICP-MS; the amount of mercury was determined directly in solid samples using the Advanced Mercury Analyser. A standard operation procedure for the sample preparation and determination of metal content was developed and validated. Presence of Cd, Cu, Hg, and Pb decreased the accumulation of zinc by the fungi. The basidiomycete Pycnoporus cinnabarinus exhibited the highest metal binding capacity of all fungi tested.     

Optimization of the Conditions for the Cr (III) Adsorption on Activated Carbon

In order to understand the patterns of the adsorption equilibrium of Cr (III) on activated carbon, the adsorption process was studied by two different ways: classical batch experiments on commercial Norit and Merck activated carbons and their oxidized forms in a wide range of pHs; and extended time-based tests at the same pH values on the same adsorbents. This approach allowed us to understand the role of texture, chemical carbon surface functionality and experimental conditions (initial pH of the solution, contact time and adsorbate/adsorbent ratio) on the effectiveness of Cr (III) removal. The adsorption process of Cr (III) at (24 ± 1^∘C) on Merck and Norit activated carbons and their oxidized forms were studied at pH values between 1.5 and 5 (either adjusted or buffered). Chromium concentration was fixed at 200 ppm. The carbon loading ranged from 1.2 to 20 g/l. The carbon/Cr (III) solution contact time was varied from 0.5–1 month to 5 months, to ensure that the saturation of the carbon level was reached. According to the data obtained, the presence of carboxylic groups on carbon surface seems to enhance Cr (III) uptake at initial pH of the solution in the range between 2 and 4. Depending on the nature of the adsorbent surface chemistry, the contact time to reach equilibrium may range from 3 to 5 months. There is an optimum carbon loading which limits the Cr (III) uptake/removal at given pH value. In order to understand the adsorption process, an ion exchange, surface complex and surface precipitation were considered. This paper was presented in the 5th Brazilian Meeting on Adsorption, held at Natal, Brazil, 18-21 July, 2004.     

Selective adsorption, pre-concentration and matrix elimination for the determination of Pb(II), Cd(II), Hg(II) and Cr(III) using 1,5,9,13-tetrathiacyclohexadecane-3,11-diol anchored poly (p-chloromethylstyrene-ethyleneglycoldimethacrylate) microbeads

Poly(p-chloromethylstyrene-ethyleneglycoldimethacrylate) polymeric microbeads, poly(p-CMS-EGDMA), were synthesized and 1,5,9,13-tetrathiacyclohexadecane-3,11-diol (S4HD) was attached chemically onto the polymeric microbeads. Characterization of all microbeads was done by Fourier transform-infrared spectrometry (FT-IR) and elemental analyzer. The amount of attached 1,5,9,13-tetrathiacyclohexadecane-3,11-diol to the polymer was found to be 2.23 mmol g⁻¹ polymers. The ligand attached microbeads, poly(p-CMS-EGDMA-S4HD), were used to examine the adsorption capacity of Pb(II), Cd(II), Hg(II) and Cr(II) ions for recovery, pre-concentration and the matrix elimination by changing the pH and the initial metal ion concentrations and also adsorption kinetics of the studied metal ions was determined. Pre-concentration factors for the studied toxic metal ions were found to be more than 500-fold and recovery was between 92 and 106%. In the drinking, lake, tap and sea-water samples from water lands, ultra-trace toxic metal ion concentrations were determined easily by using ligand modified microbeads after pre-concentration because of the high pre-concentration factor and easily matrix elimination using ligand modified microbeads. Reference sea-water material was used for the validation of the method and it was found that recovery, pre-concentration and the matrix elimination were performed perfectly. For the desorption of the toxic metal ions, 3 M HCl containing 0.8 M thiourea was used and desorption ratio was obtained more than 96%.     

Thermochemistry of adducts of some bivalent transition metal bromides with 4-chloroaniline

The compounds [MBr₂(p-clan)₂] (where M is Mn(II), Fe(II), Co(II), Ni(II), Cu(II) or Zn(II); p-clan = 4-chloroaniline) were synthesized and characterized by melting points, elemental analysis, thermal analysis and electronic and IR spectroscopy. The enthalpies of solution of the adducts, metal(II) bromides and 4-chloroaniline in methanol, 1.2 M aqueous HCl or 25% (v/v) 1.2 M aqueous HCl in methanol were measures and by using thermochemical cycles, the following thermochemical parameters for the adducts have been determined: the standard enthalpies for the Lewis acid/base reactions (Δ_rH°), the standard enthalpies of formation (Δ_fH°), the standard enthalpies of decomposition (Δ_DH°), the lattice standard enthalpies (Δ_MH°) and the standard enthalpies of the Lewis acid/base reactions in the gaseous phase (Δ_rH°(g)). The mean bond dissociation enthalpies of the metal(II)-nitrogen coordinated bonds and the enthalpies of adduct formation in the gaseous phase have been estimated.     

Nickel Aqueous Speciation and Solubility at Ambient Conditions: A Thermodynamic Elegy

Summary.  This review reveals that, in contrast to the general opinion, the aqueous speciation of nickel is poorly known. Besides the fairly well established first hydrolysis constant, data are scarce and only poor estimates can be derived for higher Ni hydrolysis constants from a few solubility studies. The situation is even worse in the case of aqueous carbonate complexes. No reliable experimental study has been published so far and almost all numbers reported in thermodynamic databases are unacceptable estimates. In this review we scrutinise all these published estimates and propose expectation ranges of nickel carbonate complex stability through correlation with other known thermodynamic constants. Solubility constants for a few simple nickel solids are known or have been estimated from thermochemical data. However, none of these simple solids is of geochemical relevance at ambient conditions. Based on field evidence, classes of solids are identified which potentially govern nickel concentrations in ground and surface waters. Recent spectroscopic data indicate that magnesium clay minerals and layered double hydroxides are the most prominent candidates for nickel-bearing solids at ambient conditions. Corresponding author. E-mail: wolfgang.hummel@psi.ch Dedicated to the memory of Prof. Rolf Grauer Received January 14, 2003; accepted January 24, 2003 Published online May 15, 2003     

Polarography in solution of some problems in organic chemistry: recent applications

Applications of chromatographic and atomic absorption methods are compared with those of electroanalytical techniques. The limitations of electroanalytical procedures and their advantages, such as speed, sensitivity and speciation are discussed. Among applications of polarography and voltammetry to a solution of basic problems, attention has been paid to the possibility to distinguish the degree of conjugation (e.g. of compounds containing the grouping CNNC), to a contribution to understanding of solution chemistry of mitomycin C and to processes involved in the reduction of cephalosporins. Among practical applications, the possibility to analyze suspensions, which can be carried out without separation offers advantages. Examples are interactions in suspensions of bile salts in the presence of metal (II) ions, adsorptions of various pesticides and other toxic materials on lignin and the possibility to follow alkaline cleavage of lignin in buffers pH 8-12 at 25 °C. Most of these studies would not be possible to carry out using other techniques.     

Evaluations of solid electrodes for use in voltammetric monitoring of heavy metals in samples from metallurgical nickel industry

Evaluation of different solid electrode systems for detection of zinc, lead, cobalt, and nickel in process water from metallurgical nickel industry with use of differential pulse stripping voltammetry has been performed. Zinc was detected by differential pulse anodic stripping voltammetry (DPASV) on a dental amalgam electrode as intermetallic Ni–Zn compound after dilution in ammonium buffer solution. The intermetallic compound was observed at –375 mV, and a linear response was found in the range 0.2–1.2 mg L^–1 (r²=0.98) for 60 s deposition time. Simultaneous detection of nickel and cobalt in the low g L^–1 range was successfully performed by use of adsorptive cathodic stripping voltammetry (AdCSV) of dimethylglyoxime complexes on a silver–bismuth alloy electrode, and a good correlation was found with corresponding AAS results (r²=0.999 for nickel and 0.965 for cobalt). Analyses of lead in the g L^–1 range in nickel-plating solution were performed with good sensitivity and stability by DPASV, using a working electrode of silver together with a glassy carbon counter electrode in samples diluted 1:3 with distilled water and acidified with H₂SO₄ to pH 2. A new commercial automatic at-line system was tested, and the results were found to be in agreement with an older mercury drop system. The stability of the solid electrode systems was found to be from one to several days without any maintenance needed.     

New organic metals: Radical cation salts of bis(ethylenedioxo)tetrathiafulvalene with halide mercurate anions

Radical cation salts with halide mercurate anions were obtained by the electrochemical oxidation of bis(ethylenedioxo)tetrathiafulvalene (BEDO-TTF), and their conductivity was studied. The compounds (BEDO-TTF)₄Hg₃X₈ (X = Cl or Br), (BEDO-TTF)₄Hg_3.5I₉, and (BEDO-TTF)₂HgBr₃ possess the conductivity of the metallic type down to helium temperatures.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1167–1170, May, 1996.