Adsorption of Pb(2+) ions on nanosized gamma-Fe(2)O(3): formation of surface ternary complexes on ligand complexation

Adsorption of Pb²⁺ ions on the combustion derived nanosized γ-Fe₂O₃ and its thiourea complex composite is reported. The adsorbents upon adsorption of Pb²⁺ ions are characterised by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray microanalysis and infrared spectroscopy techniques. The eluent is characterised by atomic absorption spectroscopy for the estimation of Pb²⁺ ions. The reduction in the amount of lead after adsorption was estimated to be around 50% in case of complex composite adsorbent and around 15% in case of the γ-Fe₂O₃ adsorbents. Orthorhombic PbSO₄ precipitated out from the eluent and is reported with a model reaction. Adsorption of lead onto the complex composite is explained through the formation of a surface tertiary complex. The advantage of employing a thiourea-γ-Fe₂O₃ complex composite as solid adsorbent for the adsorption of heavy metal pollutants is envisaged in the present investigation.     

Ultra-trace analysis of U,Th, Ca and selected heavy metals in high purity refractory metals with isotope dilution mass spectrometry

A method for the determination of trace impurities (U, Th, Ca, Fe, Cr, Ni, Cu, and Cd) in the refractory metals molybdenum and tungsten with isotope dilution mass Spectrometry (IDMS) has been developed. This method enables determinations of uranium and thorium down to the lowest pg/g level with high precision and accuracy. Selective chromatographic, extractive and electrolytic methods for the trace-matrix separation were combined with positive thermal ionization mass spectrometry. Different samples of high purity (4N) and of ultra high purity (UHP) materials for advanced technologies were analysed. The detection limits reached are (in ng/g): U 0.006, Th 0.008, Ca 10, Fe 19, Cr 0.5, Ni 0.6, Cu 2.7, and Cd 0.12. A comparison of results with other sensitive analytical methods (ICP-MS, GDMS, SIMS) makes obvious the urgent necessity of a reliable calibration method like IDMS because the analytical results obtained by the other methods often spread over a wide range.     

Effect of group II metal cations on catecholate oxidation.

The unexpected effects of Ca(2+) on the free-radical chain reactions of dopamine, norepinephrine, isoproterenol, and pyrocatechol oxidation are studied using oxygen consumption measurements, EPR-spectroscopy, UV/VIS spectrophotometry, and by potentiometric titration. It is found that the formation of Ca(2+)-catecholate complexes is accompanied by an increase in the dissociation constants (K(ai) ) of their phenolic hydroxyls. At pH>pK(ai) and in the presence of alkaline-earth metal cations, the rate of catecholate oxidation increases (Ca(2+), Mg(2+)> Sr(2+), Ba(2+)), whereas on addition of Zn ions the rate decreases. The effects of Group II metal cations on catecholate autoxidation are concomitant with a transient increase of the EPR signal for metal-semiquinonate complexes. Therefore, the effects of Ca(2+) and other alkaline-earth metal cations on catecholate autoxidation can be defined as 1) additional deprotonation of catechol OH-groups involved in the formation of M(2+)-catecholate complexes, the latter exceeding catechols in the susceptibility to dioxygen-induced oxidation and 2) formation of relatively stable free-radical intermediates responsible for chain propagation.     

Aromatic hydrocarbons, carbocyclic ligands spanning several oxidation states in both Main Group and transition elements. Recent advances with early transition d elements

In this paper some synthetic procedures to obtain (η⁶-arene)metal derivatives are reviewed. The metal-atom-arene-vapor co-condensation technique is the most appropriate to generate complexes of polycyclic aromatic hydrocarbons or heterocycles. As far as the aluminium halide-mediated synthesis is concerned, two classes of reaction are observed. When AlX₃ is used with a metal halide in the presence of an aromatic hydrocarbon in the absence of any reducing agent, AlX₃ can function as a dehalogenating agent, to give ionic compounds of general formula [M(η⁶-arene)n](AlX₄)_m, or it can add across the M---X bond with formation of M(μ-X)_nAlX_4−n systems. In both cases the metal displays its typical oxidation state. However, the use of AlX₃ in combination with aluminium (the Fischer-Hafner reducing system) affords ionic or covalent low-oxidation-state metal(η⁶-arene) complexes. Attention is focused on our most recent results concerning the synthesis, properties and reactivity of η⁶-arene derivatives of Group 4 and 5 elements, showing, inter alia, the first example of a tetraarylborate anion behaving as a 12-electron donor to one metal atom and low-valent η⁶-arene compounds as useful reagents in the inorganic and coordination chemistry of the corresponding metal in nonaqueous systems.     

Active nickel-based reduction of organic compounds

The reducing system NiCl₂·2H₂O—Li—arene_cat (cat is catalyst) was proposed for use to reduce a wide range of organic compounds, including alkenes, alkynes, carbonyl compounds, imines, halogenated derivatives, sulfonates, aromatic compounds, hydrazines, azo and azoxy compounds, N-oxides, and nitrones. The degree of reduction can be controlled for some substrates. Deuterium can be incorporated in the reaction products using nickel chloride deuteriohydrate. Nitrones, N-alkoxyamides, and acyl azides are also reduced with the Li—arene_cat system containing no nickel salt.     

A QM-MM interface between CHARMM and TURBOMOLE: implementation and application to systems in bulk phase and biologically active systems

The implementation of a hybrid QM-MM approach combining ab initio and density functional methods of TURBOMOLE with the molecular mechanics program package CHARMM is described. An interface has been created to allow data exchange between the two applications. With this method the efficient multiprocessor capabilities of TURBOMOLE can be utilized with CHARMM running as a single processor application. Therefore, features of nonparallel running code in CHARMM like the TRAVEL module for locating saddle points or VIBRAN for the calculation of second derivatives can be exploited by running the CPU intensive QM calculations in parallel. To test the methodology, several small systems are studied with both Hartree-Fock and density functional methods and varying QM-MM boundaries. Also, the computationally efficient RI-J method has been examined for use in QM-MM applications. A B(12) cofactor containing cobalt has been studied, to examine systems with a large QM region and transition metals. All tested methods perform satisfactory in comparison with pure quantum calculations. Additionally, algorithms for the characterization of saddle points have been tested for their potential use in QM-MM problems. The TRAVEL module of CHARMM has been applied to the Menshutkin reaction in the condensed phase, and a saddle point was located. This saddle point was verified by calculation of a steepest descent path connecting educt, transition state, and product, and by calculation of vibrational modes.     

Coordination solids via assembly of adaptable components: systematic structural variation in alkaline earth organosulfonate networks

A family of alkaline earth organosulfonate coordination solids is reported. In contrast to more typical crystal engineering approaches, these solids are sustained by the assembly of building blocks that are coordinatively adaptable rather than rigid in their bonding preferences. The ligand, 4,5-dihydroxybenzene-1,3-disulfonate, L, progressively evolves from a 0D, 1D, 2D, to a 3D microporous network with the Group II cations Mg(2+), Ca(2+), Sr(2+), and Ba(2+), (compounds 1-4), respectively. This trend in dimensionality can be explained by considering factors such as hard-soft acid-base principles and cation radii, a rationalization which follows salient crystal engineering principles. The selective gas sorption properties of the microporous 3D network [Ba(L)(H(2)O)].H(2)O, 4, with different gaseous guests are also presented.     

CeAgAs2 — a New Derivative of the HfCuSi2 Type of Structure: Synthesis,Crystal Structure and Magnetic Properties

Single crystals of CeAgAs₂ have been obtained by chemical transport reactions starting from a pre‐reacted powder sample. The crystal structure was solved using X‐ray diffraction (space group Pmca, No. 57, a = 5.7586(4) Å, b = 5.7852(4) Å, c = 21.066(3) Å, Z = 8) and refined to a residual of R(F) = 0.029 for 46 refined parameters and 1020 reflections. The structure of CeAgAs₂ represents a new distorted and ordered variant of the HfCuSi₂ type. The characteristic feature of this structure are infinite cis‐trans chains of As atoms with As—As distances of 2.563(1) Å and 2.601(1) Å. CeAgAs₂ is paramagnetic (μ_eff = 2.37 μ_B, θ = —10.5(2) K), with antiferromagnetic ordering at 5.5(2) K and exhibits a metamagnetic transition starting at 4.6 kOe and T = 1.8 K.     

Digests or extracts?—Some interesting but conflicting results for three widely differing polluted sediment samples

Three sets of samples have been investigated in some detail. One set is from a river polluted by mine workings, containing substantial levels of Fe, Mn,Cu, Zn and Ni with traces of many other metals. The second set consists of typical estuarine sediments contaminated from a wide range of industrial sources, and the third set consists of oily drilling cuttings from the sea bottom in the vicinity of a North Sea oil production platform.These samples have been subjected to treatment 1) with EDTA at two different pH's (extracts) 2) with HNO₃/H₂O₂ 3) with HNO₃/HCl and 4) with HNO₃/HCl/HF (digests). EDTA recoveries, compared toaqua regia digests, are often very reproducible, not dependent on pH, and usually significantly low. Nitric/peroxide andaqua regia digests often give very close results suggesting that these are meaningful values indicating the maximum levels of polluting metals in the sediments. However, the triple acid digest with HF does sometimes give higher values (and reasonable agreement for CRM's such as MESS-1) but with poorer reproducibility.     

Inorganic electrides

Inorganic electrides are a novel kind of ionic compounds in which the anions are electrons confined in a complex array of cavities or channels and the cations are nanoscale arrays of alkali metal ions that provide charge balance. In electrides the donated electron behaves like a low-density correlated electron gas, whereby the dimensionality of the electron gas and its electronic and magnetic properties are determined by the topology of the cavities in the host matrix. Unlike traditional electrides, in which alkali cations are encapsulated within an organic cage, inorganic electrides are thermally stable. The current inorganic electrides based on alkali metal loaded zeolites can be designed as useful reduced-dimensionality materials. Inorganic electrides are powerful reducing agents, and they are able to reduce small aromatic molecules to the radical anions within the channels of the zeolite.