RuO2 electrode surface effects in electrocatalytic oxidation of glucose

We have studied the electrocatalytic activity of RuO₂-PVC film electrodes, fabricated using RuO₂ powders prepared at five different temperatures, viz., 300, 400, 500, 600 and 700°C, for the oxidation of glucose in high alkaline media, 1 to 3 M NaOH. The RuO₂-PVC film electrodes have been first characterized in 1 to 3 M NaOH solution by cyclic voltammetry (CV) and rotating disc electrode (RDE) techniques in a wide potential range −1,100 to 450 mV (SCE), and three redox pairs representing Ru(IV)/Ru(III), Ru(VI)/Ru(IV) and Ru(VII)/Ru(VI) transitions have been identified. The voltammetric peaks at low sweep rates have been analyzed using surface activity theory formulated for interacting electroactive adsorption sites, and interaction terms have been evaluated. The total voltammetric surface charges have been analyzed as per Trassatti’s formalism with respect to their dependence on potential sweep rate, and charges associated with less accessible and more accessible surface sites have been calculated. For glucose oxidation, the results have indicated that RuO₂ (700°C)-PVC electrode shows two oxidation peaks in contrast to RuO₂ (300°C)-PVC electrode. Also, RuO₂ (700°C)-PVC electrode exhibits higher intrinsic electrocatalytic activity than the 300°C electrode, although the former possesses lower electrochemically active surface area. Additionally, kinetic analyses made from RDE results with reference to Michealis–Menten (MM) enzyme catalysis has shown that RuO₂ (700°C) electrode possesses extended glucose-sensing range in terms of MM kinetic constant, K _M , compared to other electrodes. Possible reasons for such differences in the behavior of the electrodes of different temperatures towards glucose oxidation are identified from studies on oxidation of glucose in solutions of different pH, oxidation of different glucose derivatives, and also from physicochemical results from BET, XRD, SEM, DTGA, XPS analysis of RuO₂ powder samples.     

Volatile phase profiling of mainstream smoke by glass capillary gas-chromatographic techniques

A heated injection system for a microprocessor-controlled GC has been developed for the (GC)² analysis of the volatile phase of whole smoke of a cigarette. Effects of injection port temperature and the presence of a Cambridge filter pad are demonstrated. Chromatograms are shown for smoke samples with and without a Cambridge Filter with the sample valve oven at 25°, 165° and 205°C. The use of a flame ionization and a nitrogen-phosphorous detector is illustrated.     

MH—Ni电池封口化成及其性能

在硼氢化钾碱性溶液中对金属氢化物（ＭＨ）电极的表面进行化学还原处理，提高了ＭＨ电极的放电容量、活化性能和电催化活性．用其为负极组装的ＡＡ型ＭＨ－Ｎｉ电池进行了封口化成，电池放电容量达到１１５０ｍＡｈ，５Ｃ下电池的放电容量达到０．２Ｃ下容量的８０％以上，电池在１Ｃ１００％ＤＯＤ（放电深度）充放电条件下，循环寿命由原来的１００次左右提高到２００次以上     

Synthesis of phthalide derivatives using nickel-catalyzed cyclization of o-haloesters with aldehydes

The reaction of o-bromobenzoate (1 b) with benzaldehyde (2 a) in the presence of [NiBr(2)(dppe)] (dppe=1,2-bis(diphenylphosphino)ethane) and zinc powder in THF (24 hours, reflux temperature), afforded 3-phenyl-3H-isobenzofuran-1-one (3 a) in an 86 % yield. Similarly, o-iodobenzoate reacts with 2 a to give 3 a, but in a lower yield (50 %). A series of substituted aromatic and aliphatic aldehydes (2 b, 4-MeC(6)H(4)CHO; 2 c, 4-MeOC(6)H(4)CHO; 2 d, 3-MeOC(6)H(4)CHO; 2 e, 2-MeOC(6)H(4)CHO; 2 f, 4-CNC(6)H(4)CHO; 2 g, 4-(Me)(3)CC(6)H(4)CHO; 2 h, 4-C(6)H(5)C(6)H(4)CHO; 2 i, 4-ClC(6)H(4)CHO; 2 j, 4-CF(3)C(6)H(4)CHO; 2 k, CH(3)(CH(2))(5)CHO; 2 l, CH(3)(CH(2))(2)CHO) also underwent cyclization with o-bromobenzoate (1 b) producing the corresponding phthalide derivatives in moderate to excellent yields and with high chemoselectivity. Like 1 b, methyl 2-bromo-4,5-dimethoxybenzoate (1 c) reacts with tolualdehyde (2 b) to give the corresponding substituted phthalide 3 m in a 71 % yield. The methodology can be further applied to the synthesis of six-membered lactones. The reaction of methyl 2-(2-bromophenyl)acetate (1 d) with benzaldehyde under similar reaction conditions afforded six-membered lactone 3 o in a 68 % yield. A possible catalytic mechanism for this cyclization is also proposed.     

Determination of dopamine in synthetic cerebrospinal fluid by SWV with a graphite–polyurethane composite electrode

This work describes an electroanalytical investigation of dopamine using cyclic voltammetry (CV) and the graphite–polyurethane composite electrode (GPU). In CV studies, well-defined redox peaks characterize the oxidation process at the GPU electrode, which is indicative of electrocatalytic effects associated with active sites on the GPU electrode surface. A new analytical methodology was developed using the GPU electrode and square wave voltammetry (SWV) in BR buffer solution (0.1 mol L^–1; pH 7.4). Analytical curves were constructed under optimized conditions (f=60s^–1, E_a=50 mV, E_I=2 mV) and detection and quantification limits of 6.4×10^–8 mol L^–1 (12.1 g L^–1) and 5.2×10^–6 mol L^–1 (0.9 mg L^–1), respectively, were achieved. The precision of the method was checked by performing ten successive measurements for a 9.9×10^–6 mol L^–1 dopamine solution. For intra-assay and inter-assay precisions, the relative standard deviations were 1.9 and 2.3%, respectively. In order to evaluate the developed methodology, the determination of dopamine was performed with good sensitivity and selectivity, without the interference of ascorbic acid in synthetic cerebrospinal fluid, which indicates that the new methodology enables reliable analysis of dopamine.     

碱性溶液中金电极上氧还原中间物研究

应用改进了的旋转全电极上的电势阶跃计时库仑法,分别测定了不同电极电势下氧还原过程中电极吸附中间物和溶解中间物氧化所需的电量,实验证明,在此过程中电极上确有吸附中间物存在,而且是电极电势的函数,但其分子属性尚需进一步鉴别。     

Mass transfer to horizontal gas-generating electrodes

Mass transfer to a horizontal electrode during electrolytic evolution of oxygen and hydrogen at current densities of 100 to 10 000 A/m² is studied. The mass transfer intensity is evaluated from the diffusion layer thickness, which varies from 60 to 5 μm at such current densities. Calculations show that the decrease in the diffusion layer thickness is due to bubbles with a stationary interphase surface crossing the diffusion layer. During the hydrogen evolution, the diffusion layer thickness is nearly the same for vertical and horizontal electrodes. During the oxygen evolution, the diffusion layer is much thinner for a horizontal electrode. Additional decrease of the diffusion layer thickness during the evolution of oxygen is associated with the lesser solution density in the near-electrode layer and with its transport away by means of natural convection.     

Adsorption of the fluoride ion on the surface of various faces of a single crystal of silver: a quantum-chemical study

The fluoride ion adsorption from a gas phase on various faces of a single crystal of silver is studied by a density functional method within a cluster model for metal. The adsorption bond energy is found to increase in the series Ag(100) < Ag(111) < Ag(311) < Ag(110). A substantial structural and energetic heterogeneity of various adsorption sites is revealed. The results are utilized to simulate the electrochemical interface between individual faces of a single crystal of silver and aqueous solutions containing the fluoride ion. It is assumed that the adsorption potential may be represented as the sum of two contributions, one of which describes the metal–ion interaction and the other, the ion solvation energy. The plotted adsorption terms take into account partial degradation of the fluoride ion when adsorbed from an aqueous solution. Estimates of discreteness of the electrical double layer are presented. A conclusion on the maximum manifestation of specific adsorption of the fluoride ion for the Ag(100) face is made.Translated from Elektrokhimiya, Vol. 41, No. 2, 2005, pp. 232–238.Original Russian Text Copyright © 2005 by Nazmutdinov, Zinkicheva.This revised version was published online in April 2005 with corrections to the article note and article title and cover date.     

电化学合成聚苯胺粉末电极的电化学行为研究

我们曾用慢速动电位扫描法研究化学合成聚苯胺粉末的电化学行为.本文对恒电位电解合成聚苯胺粉末进行了研究.用这种方法制备的粉末由于合成溶液中不含氧化剂因而纯度高.本文还报导了这种聚苯胺粉末电极的交流阻抗测量结果.交流阻抗法曾用于聚苯胺膜的电导和化学合成聚吡咯的电阻测定. 所用盐酸、氟硼酸、硅氟酸、苯胺均为分析纯;苯胺经常压蒸馏提纯;硫酸为超纯;磷酸为分析纯;高氯酸为优级纯.溶液皆用两次蒸馏水配制.     

铁氰化锰修饰玻碳电极的制备及其电化学性能

A thin film of manganese hexacyanoferrate （MnHCF） was electrochemically formed on a glassy carbon （GC） electrode to prepare a chemically modified electrode （CME）. The mechanism of film formation of MnHCF and its growth process were investigated in detail by cyclic voltammetry. The results show that the stoichiometric composition of MnHCF is Mn^ⅢFe^Ⅲ（CN）6, an analogue of prussian yellow. There exist three clear-cut stages in the whole modification process and the last stage is indispensable to the fabrication of homogenized, stable MnHCF film and must last for an appropriate time. The surface morphology of MnHCF/GC electrode was characterized by scanning electron microscopy （SEM）, which further verified the effective deposition of MnHCF film on GC. The kinetic constants of MnHCF/GC electrode process were also evaluated. The resulting MnHCF film modified electrode presented good stability and high electrocatalytic activity toward the oxidation of H2O2, indicating that MnHCF film possesses function of catalase and can be expected for analytical purposes.