硅钼杂多阴离子薄膜修饰电极线性扫描伏安法测定黑液中可溶性硅

本文报导了以玻碳电极为基体的１：１２硅钼杂多阴离子薄膜化学修铈电极的制备及其电化学特性。并应用于导数伏安法测定。在４．０×１０￣（－３）ｍ０ｌ／Ｌ（ＮＨ＿４）＿６ＭＯ＿７Ｏ＿（２４）－６．８×１０￣（－２）ｍｏｌ／ＬＮａ＿３Ｃｉｔ－０．４８ｍｏｌ／ＬＮＨＯ＿３体系中，硅浓度在８．３×１０￣（－７）～１．７×１０￣（－３）ｍｏｌ／Ｌ范围内与峰电流呈良好线性关系，检测限为８．０×１０￣（－７）ｍｏｌ／Ｌ。对可溶性硅（以ＳｉＯ＿２计）为２４５．０５ｍｇ／Ｌ的黑液，稀释１０倍后，取２．００ｍＬ平行测定９次，ＲＳＤ为０．５８％，加标回收率在９７．３％～１０４．４％间。     

L—氨基酸氧化酶电极的制作及电极特性的研究

报道了一种新的Ｌ－氨基酸氧化酶电极，这种酶电极系由氨气敏电极和以氨基化玻璃布为载体的酶膜所组成；研究了固定化条件对酶膜活性的影响以及底物浓度、温度和ｐＨ对电极响应特性的影响。该电极在６．０×１０＾－５～４．０×１０＾－３ｍｏｌ／Ｌ的底物浓度范围内呈良好的线性关系，检测下限为５．０×１０＾－５ｍｏｌ／Ｌ。在最宜条件下，酶电极具有良好的稳定性。     

电沉积镍钨注钼电极的析氢反应

在所有电极过程中研究最多的是析氢反应,其重要性一直为化学界所关注。提高电极活性的各种方法中,普遍采用电沉积法,它价廉简便、效果明显。但涂层不够牢固,在使用过程中易脱落,使用寿命短。为了克服上述缺点,作者将电沉积和离子注入技术联合使用,即在Ni、W镀层上注入Mo离子,利用Mo离子的能量将Ni、W打入表面内层,进行离子束混合。这既     

PVC基管状流通钾离子选择电极的研制及其在流动注射分析中的应用

实验装置由PVC基管状流通钾离子选择电极和与它结合的流动注射分析体系两部分组成。对该体系的分析特点和影响测定的参数进行了讨论,建立了土壤浸提液中钾测定方法,样品分析结果和火焰光度法有良好一致性。     

Determination of phosphate in hydroponic nutrient solutions using flow injection potentiometry and a cobalt-wire phosphate ion-selective electrode

The direct flow injection potentiometric (FIP) analysis of phosphate in hydroponic nutrient solution has been carried out using a cobalt-wire ion-selective electrode (ISE). Synthetic hydroponic nutrient solution, commercial hydroponic nutrient solution and working hydroponic farm nutrient solution were analysed for phosphate using the FIP technique. It is shown that FIP results compare favourably to standard methods of analysis such as spectrophotometry and indirect photometric ion-pair chromatography. Reproducible FIP response curves with a slope of −(47.57±0.03) mV per decade and intercept of −(169.7±0.1) mV were obtained for four separate calibrations in the concentration range 5.0×10⁻⁴–1.0×10⁻² M H₂PO₄⁻. Anion corrections for interferences by Cl⁻, NO₃⁻ and SO₄²⁻ were applied to all samples using the selectivity coefficients determined independently using a fixed interference method. Nevertheless, it was found that anion corrections were not necessary, as the deviations fell within the bounds of experimental error for the cobalt-wire ISE technique (i.e.±2–5% R.S.D.). The proposed FIP method enables the direct determination of phosphate in hydroponic nutrient solutions.     

Characterization of Mercury – Humic Acids Interaction by Potentiometric Titration with a Modified Carbon Paste Mercury Sensor

Stability constant for mercury binding by commercial and natural humic acids (HA) were determined using a new potentiometric mercury(II) sensor based on dithiosalicylic acid modified carbon paste electrode. The sensor present a high selective and sensitive response to mercury(II) ions, and a low detection limit of 1.8×10^?8 M. The potentiometric titrations curves of humic acids against mercury(II) ions were modeled. For 1.00×10^?7 to 3.00×10^?4 M mercury(II) ion concentration levels the results are consistent with the presence of two different binding sites in the humic acid macromolecule. The strongest binding sites (log K₁ ranging from 10.1 to 6.8) are probably due to interaction with carboxylic acid and amine groups in the molecule, whereas weakest binding sites (log K₂ ranging from 8.8 to 4.5) can be associated to phenolic groups.     

Determination of Uric Acid and Norepinephrine by Chitosan‐Multiwall Carbon Nanotube Modified Electrode

A novel chemically modified electrode based on the chitosan‐multiwall carbon nanotube (MWNT) coated glassy carbon electrode (GCE) is described, which exhibited an attractive ability to determine uric acid (UA) and norepinephrine (NE) simultaneously. The responses of UA and NE merged into a large peak at a bare GCE, but yielded two well‐defined oxidation peaks at the chitosan‐MWNT modified GCE (MC/GCE). The experimental parameters were optimized, and a direct electrochemical method for the simultaneous determine for UA and NE is proposed. The MC/GCE showed good sensitivity, selectivity and stability.     

The Electrochemical Behavior of Keggin Polyoxometalate Modified by Tricyclic,Aromatic Entity

The inorganic‐organic hybrid polyoxometalates (POMs), (pbpy)₄H[PMo₁₂O₄₀(VO)] ( 1 ) and (pbpy)₄H₄[SiMo₁₂O₄₀] ( 2 ) (pbpy=5‐phenyl‐2‐(4‐pyridinyl)pyridine), have been synthesized and were, respectively, used as a solid bulkmodifier to fabricate a three‐dimensional bulk‐modified carbon paste electrode (CPE) by direct mixing. The electrochemical behavior and electrocatalysis of 1 and 2 modified CPE ( 1 ‐CPE and 2 ‐CPE) have been studied in detail. Both 1 ‐CPE and 2 ‐CPE show remarkable stability that can be ascribed to the doped organic conjugated pbpy, which is very important for practical applications in electrode modification.     

Effect of ionic strength on the formal potential of the glass electrode in various saline media

We examined the variation with ionic strength (I, adjusted with KCl, KNO₃, KBr, NaCl or NaClO₄) of the formal potential (E_const) for glass electrodes exhibiting a Nernstian response (i.e. E_cell=E_const−s log [H⁺]). For this purpose, we investigated the different factors included in the formal potential, so we obtained reported values for the liquid junction potential as a function of ionic strength and determined the logarithm of the activity coefficient for the proton in various saline media, using Pitzer equations.     

Pt／钇稳定氧化锆固体电解质在高温下的电化学性质

用交流阻抗技术研究了二电极、三电极Ｐｔ／钇稳定氧化锆（简称ＹＳＺ）高温固体电化学体系．开路电位下，Ｐｔ／ＹＳＺ体系只有一个阻抗半圆，对应于电极体系的电化学活化控制过程，极化电阻随温度变化的表观活化能为１７１．５ｋＪ／ｍｏｌ．Ｐｔ／ＹＳＺ界面的双电层电容约为３００μＦ／ｃｍ２．阳极极化下，交流阻抗极化电阻显著减小；阴极极化下，极化电阻反而增大，并出现浓差控制现象．