用扫描式电感耦合等离子体光谱仪测定红矾钾产品中的杂质

应用电感耦合等离子体发射光谱法测定了铬盐清洁工艺红矾钾产品中的微量元素硅、铝、铁、钙、锰、镁和氯。采用基体匹配法消除了大量基体的干扰。实验的优化条件为RF发生器的入射功率095kW;载气压力013MPa,流量12L·min-1;辅助气流量02L·min-1。元素氯用氯化银沉淀间接测定,在6%的硝酸体系中氯离子形成氯化物完全沉淀,在50℃陈化2h后进行测定。样品的加标回收率在90%～104%,RSD<4%,检出限在10-4%～10-5%。随机抽样的分析结果与标准加入法吻合较好,相对误差在-427%～ 526%。本方法用于实际样品分析,快速简单,结果令人满意。     

利用可见近红外光谱多指标综合预测生鲜牛肉储存期

建立了牛肉基于TVB-N、菌落总数、pH值和肉色参数L*多个指标的储存期预测模型,利用可见近红外光谱(Vis/NIR)技术结合区间偏最小二乘(iPLS)和遗传算法(GA)建立了各个指标的PLS预测模型,实现了多指标综合无损快速预测4 ℃下牛肉的储存期。用iPLS和iPLS-GA提取有效波长变量建立PLS预测模型,以预测相关系数和预测标准差作为模型评价标准,结果表明用iPLS-GA选择变量建立的各个指标的PLS预测模型均优于全波段和iPLS组合的PLS模型。由多个指标的预测值和储存期的预测模型,对校正集和预测集样品储存期进行预测,其预测相关系数和标准差分别是0.903, 0.897和1.88, 2.24。说明利用光谱技术结合得出的储存期预测模型可以实现多指标综合预测牛肉储存期,为无损快速检测牛肉储存期或货架期提供了一种新方法。      

Structural characterisation of Sb-based heterostructures by X-ray scattering methods

Antimonide-based superlattices dedicated to the elaboration of opto-electronic devices have been studied by X-ray scattering techniques. In particular, specular and non-specular X-ray reflectometry experiments have been performed on two MBE-samples elaborated with different shutter sequences at the interfaces. The results have shown a limitation of the incorporation of Sb species in the subsequent InAs layer for one of the samples, as expected.Then, a study on a InGaAs-cap layer/(InGaAs/AlAsSb)_N superlattice grown on a InGaAs/InP buffer layer by both specular X-ray reflectometry and High resolution X-ray diffraction is reported. In particular, the results have revealed the presence of a highly disturbed thin-layer on top of the MOVPE-made GaInAs, whose presence has been explained by In-concentration modification during the desoxidation procedure at the surface of the MOVPE-made GaInAs.Beside the results on the Sb-based heterostructures, the use of X-ray scattering metrology as a routinely working non-destructive testing method has been emphasized.     

液相阴极辉光放电原子发射光谱法高灵敏测定精铜矿中的铅和锌

由于重金属毒性大,且在环境、动物和人体器官中易积聚,因而在矿石开采、冶炼和加工之前,监测其中的微量重金属显得尤为重要。著名的原子光谱仪器,如原子荧光光谱(AFS)、原子吸收光谱(AAS)、电感耦合等离子体(ICP)等已广泛用于各种样品中元素的检测,但它们体积大、能耗高、价格昂贵、气体消耗大,这些缺点严重阻碍了野外现场的连续监测。为了满足分析仪器的微型化趋势,1993年Cserfalvi开发了一种电解液阴极放电原子发射光谱(ELCAD-AES)技术并将其用于分析检测中。该装置中,待测溶液以8～10 mL·min-1的流速从细管顶端溢出,然后沿管壁流入装满电解液的35 mL储液池中,以溢出溶液的液面作为放电阴极,在和流动液体电极相距2～4 mm处放一金属W(Ti)棒为阳极,细管浸入电解液并尖端向上弯曲超出储液池液面1～3 mm,细管顶端溢出的液体流入储液池并通过其中的碳棒与电源负极相连,从而构建放电系统。从那时起,为了提高激发效率和放电稳定性,人们对ELCAD进行了大量改进。基于ELCAD的特点,通过改进放电装置,建立了一种新的液相阴极辉光放电(LCGD)分析系统。该系统中,放电在直径0.5 mm的铂针阳极和内径1 mm的毛细管顶端溢出的溶液阴极之间的间隙中产生。毛细管上端和铂丝之间的间隙为2 mm,毛细管插入石墨管且露出石墨管的距离为2.5 mm。样品溶液以4.5 mL·min-1从毛细管顶端溢出流经石墨管上的凹槽,石墨管和电源负极连接。与ELCAD相比,LCGD的优点在于：Pt针做阳极,可形成尖端放电,从而降低能耗(<60 W),提高激发效率;蠕动泵管上打结,可降低泵的脉动性,提高放电的稳定性;石墨管链接电源负极,删除ELCAD中的储液池,使样品消耗更少。为了评估方法的分析性能,用LCGD测定了HNO₃-HCl消化的精铜矿样品中的铅和锌。系统研究了放电稳定性以及放电电压、溶液流速、支持电解质和溶液pH对发射强度的影响,并将LCGD与其他ELCAD的分析性能进行比较。此外,用ICP对LCGD的测试结果进行验证,t检验分析两种结果的差异性。结果表明,当电压从620升高到680 V,发射强度逐渐增大,这是因为电压升高,激发能量增大,单位体积内激发的金属原子增多,激发效率提高。考虑到放电稳定性,选择650 V为最佳放电电压。当流速从2.5增加到4.5 mL·min-1时,发射强度增加,这是由于流速增加导致进入放电区的样品量增加,发射强度增强;流速高于4.5 mL·min-1后,发射强度有下降的趋势,这是由于水荷载的增加引起放电区能量密度降低以及过量水加热消耗了用于激发样品的能量,导致激发能量降低。因此,选择最佳流速为4.5 mL·min-1。pH=1的HNO₃具有较高的激发强度,因而选择pH=1为最佳pH。最佳条件下,Pb和Zn的检出限分别为0.38和0.59 mg·L-1,相对标准偏差分别为0.9%和1.2%,功率低于60 W。实验中的检出限与其他类似方法所测结果有一定差距,这可能与所选谱仪有关。固定激发波长下研究发现,放电过程有较好的稳定性。矿石样品中Pb和Zn的回收率在87.6%~107.4％,LCGD测试结果与ICP基本一致,两种方法基本无显著性差异。与ICP相比,LCGD具有低能耗、高激发效率、小型便携等优点。随着进一步改进,有望开发出可用于实时、在线检测金属元素的微型化仪器。     

Beyond nanosizing: an approach to shape analysis of fluorescent nanostructures by SMI-microscopy

Using spatially modulated illumination (SMI) light microscopy it is possible to measure the sizes of fluorescent structures that have an extension far below the conventional optical resolution limit (“subresolution size”). Presently, the sizes are determined as the object extension along the optical axis of the SMI microscope. For this, however, “a priori” assumptions on the fluorochrome distribution (“shape”) within the examined fluorescent structure have to be made. Usually it is assumed that the fluorochrome follows a Gauss-distribution or a spherical distribution. In this report we overcome the necessity to make an assumption on the shape of the fluorochrome distribution. We introduce two new experimentally obtained parameters which allow the determination of a shape measure to describe the spatial distribution of the fluorescent dye. This becomes possible by independent measurements with different excitation wavelengths. As an example, we present shape parameter measurements on individual fluorescent microspheres with a nominal geometrical diameter (“size”) of 190 nm. In the case investigated, the experimental shape correlated well with a homogeneous fluorochrome distribution (“spherical shape”) but not with a variety of other “shapes”.     

Structure and Curie temperature of Y2Fe17-xCrx

The structures of Y2Fe17-xCrx are simulated by the ab initio potentials. The site preference of Cr atom in Y2Fe17 is evaluated and the order is determined as 4f, 12j, which is close to the experimental result. Based on the site preference behavior, the calculated parameters and the atom sites of Y-Fe-Cr system are studied. The result corresponds well to observed data. Further, the DOS of the relaxed structures are calculated and the variation in Curie temperature is explained qualitatively by the spin-fluctuation theory.     

温度对涂有溶胶-凝胶多层干涉膜的卤钨灯光谱的影响

本文叙述了两个问题.首先,采用溶胶-凝胶浸渍水解法在H4汽车灯上制备了多层干涉膜.该膜层温度升高使这种灯透过膜层的光谱有所移动,于是引起灯发射光谱的变化.其次,我们研究了温度对膜材料光学性质的影响.     

反应(Cl+HBr→HCl+Br和Cl+HBr→BrCl+H)机理和速率的密度泛函理论研究

用密度泛函理论（DFT）B3LYP方法,在6－311G＊＊基组下,计算研究了反应CI+HBr→HCI+Br和CI+HBr→BrCI+的机理,求得的各过渡态均通过振动分析加以确认。运用求得的反应活化能,以及不同温度下过渡态和反应络合物的配分函数,借助绝对反应速率理论求得50－1500K的反应速率常数。     

Sample Preparation for the Determination of Metals in Food Samples Using Spectroanalytical Methods—A Review

Abstract

The present article gives an overview of recent publications and modern techniques of sample preparation for food analysis employing atomic and inorganic mass spectrometric techniques, such as flame atomic absorption spectrometry, chemical vapor generation atomic absorption and atomic fluorescence spectrometry, graphite furnace atomic absorption spectrometry, inductively coupled plasma optical emission spectrometry, and inductively coupled plasma mass spectrometry. Among the most frequently applied sample preparation techniques for food analysis are dry ashing, usually with the addition of an ashing aid, and acid digestion, preferably with the assistance of microwave energy. Slurry preparation, particularly with the assistance of ultrasound, is increasingly used to reduce acid consumption and sample preparation time. Direct analysis of solid samples is gaining importance in the field of food analysis as it offers the highest sensitivity, avoids the use of acids and other aggressive reagents, makes possible the analysis of micro‐samples, and can be applied for fast screening analysis, e.g., of fresh meat.     

新疆产12种中草药中微量金属元素的测定

本文测定了新疆产新疆党参,新疆元胡等１２种中草药中十种微量金属元素的含量．结果表明这些中草药中具有显著生理活性的Ｚｎ、Ｆｅ、Ｃｕ、Ｍｎ等元素．它们的含量除了个别样品外均大于或接近于国内其它地区所产的同种中草药、根据冠心病病因的Ｚｎ／Ｃｕ值假说和微量金属元素的含量关系,新疆产１２种中草药也可用于防治冠心病．