Conventional and microwave synthesis,spectral, thermal and antimicrobial studies of some transition metal complexes containing 2-amino-5-methylthiazole moiety

Schiff base metal complexes of Cr(III), Co(II), Ni(II) and Cu(II) derived from 5-chlorosalicylidene-2-amino-5-methylthiazole (HL¹) and 2-hydroxy-1-naphthylidene-2-amino-5-methylthiazole (HL²) have been synthesized by conventional as well as microwave methods. These compounds have been characterized by elemental analysis, FT-IR, FAB-mass, molar conductance, electronic spectra, ¹H-NMR, ESR, magnetic susceptibility, thermal, electrical conductivity and XRD analyses. The complexes exhibit coordination number 4 or 6. The complexes are coloured and stable in air. Analytical data reveal that all the complexes exhibit 1:2 (metal:ligand) ratio. IR data show that the ligand coordinates with the metal ions in a bidentate manner through the phenolic oxygen and azomethine nitrogen. FAB-mass and thermal data show degradation pattern of the complexes. The thermal behaviour of metal complexes shows that the hydrated complexes lose water molecules of hydration in the first step; followed by decomposition of ligand molecules in the subsequent steps. XRD patterns indicate crystalline nature for the complexes. The Schiff bases and metal complexes show good activity against the Gram-positive bacteria; Staphylococcus aureus and Gram-negative bacteria; Escherichia coli and fungi Aspergillus niger and Candida albicans. The antimicrobial results also indicate that the metal complexes are better antimicrobial agents as compared to the Schiff bases.     

纳米薄层HZSM-5分子筛催化甲醇制丙烯

在合成系列硅铝比纳米薄层HZSM-5分子筛的基础上,研究了纳米薄层HZSM-5分子筛催化甲醇制丙烯(MTP)的反应性能.在固定床微反装置上详细考察了工艺条件对纳米薄层HZSM-5分子筛催化性能的影响,同时与纳米HZSM-5分子筛对MTP反应的催化性能进行了比较.结果表明,纳米薄层HZSM-5分子筛具有较高的目的产物选择性和较长的催化寿命.在适宜硅铝比(n(SiO2)/n(Al2O3)=213)和反应条件下(温度470°C,甲醇质量空速为3 h-1),丙烯的选择性达到46.7%,三烯(乙烯、丙烯和C4烯烃)选择性达到78.7%.其中,丙烯/乙烯的质量比可达到6.5,是纳米HZSM-5分子筛的2倍,而芳烃的选择性比纳米分子筛明显降低.这是因为纳米薄层HZSM-5分子筛比纳米HZSM-5分子筛具有较宽的(010)晶面、较大的外比表面积和介孔孔容.     

Chemical Probing of the Human Sirtuin 5 Active Site Reveals Its Substrate Acyl Specificity and Peptide‐Based Inhibitors

Sirtuins are NAD⁺‐dependent deacetylases acting as sensors in metabolic pathways and stress response. In mammals there are seven isoforms. The mitochondrial sirtuin 5 is a weak deacetylase but a very efficient demalonylase and desuccinylase; however, its substrate acyl specificity has not been systematically analyzed. Herein, we investigated a carbamoyl phosphate synthetase 1 derived peptide substrate and modified the lysine side chain systematically to determine the acyl specificity of Sirt5. From that point we designed six potent peptide‐based inhibitors that interact with the NAD⁺ binding pocket. To characterize the interaction details causing the different substrate and inhibition properties we report several X‐ray crystal structures of Sirt5 complexed with these peptides. Our results reveal the Sirt5 acyl selectivity and its molecular basis and enable the design of inhibitors for Sirt5.     

反相高效液相色谱法同时测定壮阳类保健品中达泊西汀和4种PDE5抑制剂

提出了反相高效液相色谱法同时测定壮阳类保健品中4种PDE5抑制剂和达泊西汀含量的方法。样品溶于水中,再加甲醇提取。分取10μL提取液进样,并用Inertsil ODS-SP色谱柱为分离柱和由(A)三乙胺-乙酸-水(8+4+988)混合液,(B)乙腈和(C)0.02%(φ)磷酸溶液三者按不同比例相混的混合液作流动相进行梯度淋洗和分离。在检测波长290nm处进行测定。他达那非的质量浓度在1.25~25.0mg·L-1范围内与其峰面积呈线性关系,其余4种化合物的质量浓度在5.0~100mg·L-1范围内与其峰面积呈线性关系,方法的检出限(3S/N)在0.05~0.2mg·L-1之间。加标回收率在94.1%~109%之间,测定值的相对标准偏差(n=6)均小于1.0%。     

低温溶剂热法制备5V级性能优异的LiCr_(0.2)Ni_(0.4)Mn_(1.4)O_4正极材料(英文)

通过低温溶剂热的方法成功制备出了LiCr0.2Ni0.4Mn1.4O4尖晶石正极材料。通过此法,溶液的饱和蒸汽压急剧降低且在室温(25℃)下即可沸腾。所有的金属离子可在随后的热聚合过程中均匀分散且煅烧后所得材料无杂质相生成。采用了热重分析,X射线衍射,扫描电镜、循环伏安,交流阻抗等测试手段对材料进行了表征。结果表明:此法所得材料含有Mn3+,为Fd3m晶型,且其形貌规则、粒度分布均一。1C和10C下放电容量为140.5和121.0 mAh·g-1,10C下100次循环容量保持率高达96.9%。其优异的电化学性能可归因于均相的前驱体制备过程,高结晶度且无杂相生成,以及较高的锂离子扩散系数诸因素的共同作用。     

An efficient method to synthesize TNAD by the nitration of 1,4,5,8- tetraazabicyclo-[4,4,0]-decane with N20s and acidic ionic liquids

An experimental study was carried out on the direct nitration of 1,4,5,8-tetraaza-bicyclo-[4,4,0]-decane to synthesize 1,4,5,8-tetranitro-1,4,5,8-tetraazabicyclo-[4,4,0]-decane(TNAD) with N2O5 catalyzed by acidic ionic liquids. Various ionic liquids, such as [HMim]X, [(CH2)4SO3HMim]X and [Capl]X(X = pTSO, NO3, HSO4), and various parameters such as equivalents of ionic liquid, molar ratio of N2O5 to the starting material, reaction time and temperature, and solvent were investigated. Ionic liquid [(CH2)4SO3HMim]HSO4 showed better catalytic activity. In the presence of 3% molar ratio of [(CH2)4SO3HMim]HSO4 ionic liquid to the staring material, the yield of 1,4,5,8-tetranitro-1,4,5,8-tetraazabicyclo-[4,4,0]-decane was improved by 6.2% compared to the system without ionic liquid.     

Fractional pyrolysis of Cyanobacteria from water blooms over HZSM-5 for high quality bio-oil production

Fractional pyrolysis and one-step pyrolysis of natural algae Cyanobacteria from Taihu Lake were comparatively studied from 200 to 500 ℃. One-step pyrolysis produced bio-oil with complex composition and low high heating value （HHV〈30.9 MJ/kg）. Fractional pyrolysis separated the degradation of different components in Cyanobacteria and improved the selectivity to products in bio-oil. That is, acids at 200 ℃, amides and acids at 300 ℃, phenols and nitriles at 400 ℃, and phenols at 500 ℃, were got as main products, respectively. HZSM-5 could promote the dehydration, cracking and aromatization of pyrolytic intermediates in fractional pyrolysis. At optimal HZSM-5 catalyst dosage of 1.0 g, the selectivity to products and the quality of bio-oil were improved obviously. The main products in bio-oil changed to nitriles （47.2%） at 300 ℃, indoles （51.3%） and phenols （36.3%） at 400 ℃. The oxygen content was reduced to 7.2 wt% and 9.4 wt%, and the HHV was raised to 38.1 and 37.3 MJ/kg at 300 and 400 ℃, respectively. Fractional catalytic pyrolysis was proposed to be an efficient method not only to provide a potential solution for alleviating environmental pressure from water blooms, but also to improve the selectivity to products and obtain high quality bio-oil.     

Synergistic effect of W and P on ZSM-5 and its catalytic performance in the cracking of heavy oil

In order to develop the conversion of heavy oil with a high yield of propylene in the catalytic cracking process, ZSM-5 zeolite was modified by tungsten and phosphorus, which was proved to be an effective method. Characterization results show that the improvement of catalytic performance could be correlated to the interaction of phosphorus and tungsten species on ZSM-5. P inhibited the aggregation of tungsten species on ZSM-5 and was conductive to convert the tungsten species with octahedral coordination into tetrahedral coordination. And this ultimately led to that more acid sites were reserved after hydrothermal treatment in the tungsten and phosphorus co-modified ZSM-5 catalyst. Phosphorus species played an important role to restrain the dehydrogenation activity of tungsten. In addition, a model reflecting the interaction between tungsten species and ZSM-5 framework was proposed.     

5-甲基苯并三唑-1-乙酸铕三元配合物的合成及表征

以5-甲基-苯并三唑-1-乙酸和1,10-邻菲啰啉为配体,采用溶液法合成了一种铕配合物。通过元素分析、配位滴定、摩尔电导率、红外光谱和紫外光谱对其进行表征。其组成可能为Eu(L)3phen·3.5H2O(HL=5-甲基-苯并三唑-1-乙酸,5-mbtaa;phen=1,10-邻菲啰啉)。使用热分析和荧光光谱研究了配合物的性质。热分析结果显示:铕配合物具有较好的热稳定性。荧光光谱显示:该配合物发出Eu(Ⅲ)特征荧光,并且5-甲基-苯并三唑-1-乙酸是较好的敏化剂。