Synthesis and kinetic evaluation of 4-deoxy-4-phosphonomethyl-d-erythronate, the first hydrolytically stable and potent competitive inhibitor of ribose-5-phosphate isomerase

4-deoxy-4-Phosphonomethyl-d-erythronate, an isosteric and hydrolytically stable analogue of the known ribose-5-phosphate isomerase inhibitor 4-deoxy-4-phospho-d-erythronate, was obtained by a 14-step synthesis from d-arabinose through an highly improved synthesis of the precursor 5-deoxy-5-phosphonomethyl-d-arabinose. The title compound appears as the first stable and potent competitive inhibitor of the enzyme catalyzed isomerization of ribose-5-phosphate to d-ribulose-5-phosphate (K_i=74 μM, K_m/K_i=100), exhibiting only a 3-fold weaker inhibitory activity than its phosphate analogue.     

甲烷在Mo/HZSM-5催化剂上的脱氢聚合反应

对不同Mo含量的Mo／HZSM－5催化剂的结构进行了表征，并对这些催化剂的甲烷非氧气氛下的转化反应进行了考察．催化剂的BET比表面积及酸性随Mo含量的增加而降低，当Mo含量大于5％时，Mo对ZSM－5分子筛的晶型有影响，并出现MoO3物相．甲烷在700℃时可高选择性地生成苯和乙烯，最佳Mo含量大约为2％．纯的MoO3或HZSM－5上该反应几乎不进行，因此，可能是分散的钼氧离子和分子筛的酸中心是甲烷转化的活性中心，只有二者的协同作用才能促进甲烷的转化．反应后催化剂中的钼物种被还原了．催化剂上的积炭可能是催化剂失活的主要原因之一，烧炭后催化剂活性基本恢复．     

Crystal and Molecular Structure of the Nitramino Derivatives of Tetrazole and 1,2,4-Triazole. III. 5-Nitraminotetrazole Lithium Salt Monohydrate

The structure of 5-nitraminotetrazole lithium salt monohydrate was determined by X-ray diffraction analysis. Crystals are monoclinic, space group P2₁/c; a = 8.3789(5), b = 10.1872(6), c = 6.6709(5) ; = 106.63(1)°; V = 545.60(98) ³; Z = 4; _calc = 1.875 g/cm³. The anion has a planar nitrimine structure with a delocalized negative charge. Each lithium cation (c.n. 5) is bound to three anions and two hydration water molecules. Both oxygen atoms of the nitro groups and the N(3) atom of the tetrazole ring are involved in cation coordination. The geometrical characteristics of the anion are similar to those found for other monosalts of 5-nitraminotetrazole.     

A novel and efficient approach to highly substituted indolizines via 5-endo-trig iodocyclization

A new approach to indolizines has been developed using a 5-endo-trig iodocyclization of allylic esters followed by isomerization and dehydroiodination facilitated by triethylamine at rt. This mild procedure enabled us to synthesize a number of highly substituted indolizines in good yields.     

镓改性ZSM-5沸石中镓活性中心的形成与表征

采用脉冲微反体系研究了经不同程度还原和不同镓含量的GaZSM-5沸石的芳构化性能与吡啶吸附红外光谱特征谱带吸收度的关联，证实了1458 cm~(-1)吸收带的用于表征与Ga物种有关的活性中心，并研究了沸石的硅铝比对Ga中心形成和Ga的价态对芳构化性能的影响。结果表明，对Ga含量相同的样品来说，硅铝比愈低，起始Ga中心生成量愈多，高价态与低价态的Ga中心对丙烷芳构化反应都有促进作用。     

Molecular and crystal structures of 5,7-dichloro-4-nitro-2,1,3-benzoxadiazole and products of its reactions with secondary amines

The molecular and crystal structures of 5,7-dichloro-4-nitro-2,1,3-benzoxadiazole and products of its reactions with hexamethyleneimine and dimethylamine were established by X-ray diffraction analysis. The molecular structures and the systems of hydrogen bonds in the crystals of these compounds are discussed.     

载铜5A分子筛在汽油模拟体系中脱硫性能的研究

近年,美国环保局计划将汽油中硫的质量分数从当前的300×10-6降到2006年的30×10-6,欧盟也已经通过了新的汽油硫质量分数标准为30×10-6~50×10-6,德国甚至提出计划使用无硫汽油[1]。中国汽油硫的质量分数高达800×10-6以上,与世界汽油品质距离甚远。因此汽油中硫化物的脱除成为当务之急。目前,脱硫技术主要有催化裂化脱硫、催化加氢脱硫、水蒸气脱硫、生物催化脱硫、吸附精制脱硫、氧化脱硫等[2~5]。吸附精制法具有净化度高、能耗低、易于操作等优点,高效的脱硫吸附剂制备是过程开发的关键。负载金属离子的活性纤维是脱除汽油中硫醇的一种…     

PEO-LiClO_4-ZSM5 composite polymer electrolyte (IV): Polarized optical microscopy study

All solid-state lithium polymer batteries may be one of the best choices for the future electrochemical power source, characterized by high energy densities, good cyclability, reliability and safety[1,2]. Owing to its potential capability to replace the t…     

DEHYDROGENATION AND AROMATIZATION OF METHANE IN THE ABSENCE OF OXYGEN OVER DOPED Mo/HZSM-5 CATALYSTS

研究了在Ｍｏ／ＨＺＳＭ－５催化剂上添加助剂以及不同的反应预处理温度对甲烷无氧脱氢芳构化反应的影响。实验结果表明，由于第二组分的添加，Ｍｏ／ＨＺＳＭ－５催化剂的活性和选择性都得到了较大程度的改善。预处理温度是影响催化剂反应性能的关键因素。Ｍｏ－Ｒｕ／ＨＺＳＭ－５催化剂经过８７３Ｋ空气预处理后，甲烷在９７３Ｋ的转化率约为１０％，催化剂的稳定性也得到较大程度的提高。ＴＰＳＲ实验结果表明，Ｒｕ的加入降低了芳烃生成的温度。ＴＰＯ和ＤＴＡ实验结果表明，在Ｍｏ－Ｒｕ／ＨＺＳＭ－５催化剂上可生成较多的碳物种，结合反应结果，可以认为反应过程中生成的碳物种对甲烷的无氧脱氢芳构化反应是起积极作用的     

Synthesis of 1-Bromo-3-methoxy-4-propoxy-5-iodobenzene——A Novel Efficient Process for the Synthesis of Brominated Aromatic Compound

The reaction of aromatic carboxylic acid with oxalyl chloride gives rise to the corresponding acid chloride which without purification is treated with the sodium salt of mercaptopyridine oxide in the presence of 2,2-azo-bisisobutyronitrile (AIBN), radical initiator to give a brominated aromatic compound. After etherification and oxidation, 5-iodovaniline was converted to trisubstituted benzene carboxylic acid which give 1-bromo-3-methoxy-4-propoxy-5-iodobenzene by this new brominating process with a yield of 74%.