Quantitative determination of sodium stearyl fumarate in a tablet formulation from continuous manufacturing using a high-pH reversed-phase HPLC method

This study demonstrates the first use of a reversed-phase (RP) high-performance liquid chromatography method with a high-pH buffer for the analysis of sodium stearyl fumarate (SSF) from a tablet formulation. After examining the retention time and peak shape using various buffer concentrations, buffer pH, and RP stationary phases, an optimized method was established using the XBridge® BEH C18 at high pH. This column was further evaluated for method specificity, accuracy, precision, linearity, stability, and sensitivity. Finally, the method was successfully used as a convenient and robust analytical procedure to accurately quantitate SSF in stratified tablets from a continuous manufacturing process to confirm the excipient uniformity throughout the process.     

Radial sample load distribution under overload conditions: Analytical scale columns

The homogeneity of the sample load across the radial cross section of analytical scale columns was determined when operating under overload conditions. The study was performed using active flow technology columns operating in parallel segmentation mode. The outlet segmentation ratio was varied to enable different volume fractions of mobile phase, and thus sample, to elute from the peripheral and central flow regions of the column. The amount of solute exiting the peripheral and radial central exit ports was determined as a function of the flow segmentation ratio. The experimental data using an analytical scale column with dimensions, 100?×?4.6?mm, indicated that the sample load distribution was essentially uniform as a function of the column radial cross section.     

Development,validation and application of an HPLC method for phenol electrooxidation products in the presence of chloride

A high-performance liquid chromatography (HPLC) method was developed and validated to determine phenol and potential intermediates from hydroxylation (hydroquinone, benzoquinone, catechol) and hypochlorination (2-chlorophenol, 3-chlorophenol, 4-chlorophenol, 2,4-dichlorophenol, 2,6-dichlorophenol, 2,3,6-trichlorophenol, 2,4,5-trichlorophenol, 2,4,6-trichlorophenol and pentachlorophenol) pathways during electrooxidation in the presence of chloride. A Hypersil ODS column (150 mm L × 4.6 mm I.D.) was used for the separation. The best separation was achieved when using a time variant gradient between a water mobile phase (with 0.1% formic acid adjusted to pH 3.0 with 0.1 mM sulfuric acid) and an organic phase (90:5:5 by volume mixture of acetonitrile:methanol:acetic acid). The flow rate was 0.8 mL min^?1 and UV absorbance was monitored at 270, 280, 290 and 300 nm, choosing the wavelength of strongest response for each compound. The intra- and inter-day accuracy and precision were tested using five replicates each day on three consecutive days.     

Residues Analysis of Post-Harvest Imidazole Fungicides in Citrus Fruit by H PLC and GLC

Abstract

The determination of imazalil and prochloraz fungicide residues has been carried out by HPLC with an UV detector at 204 nm and by GLC with an electron capture detector (ECD).

In both cases fungicide residues were extracted with hexane/acetone (90:10, v/v) after pH adjustment and purified by a liquid-liquid partitioning process. When HPLC was used for prochloraz and imazalil analysis, it was necessary to eliminate the interfering substances with a further clean-up process. This was also required when samples with low residue levels were analyzed by GLC.

Recovery was always higher than 70%. The detection limit was 0.04 ppm for the HPLC method and 0.02 for the GLC method.

Imazalil and prochloraz residues in “Washington Navel” oranges and “Hernandina” clementine fruits, dipped in a 1000 ppm fungicide solution, are reported.     

Combination of FASP and fully automated 2D‐LC‐MS/MS allows in‐depth proteomic characterization of mouse zymogen granules

Zymogen granule (ZG) constituents play important roles in pancreatic injury and disease. In previous studies, proteomic analyses with rat zymogen granules were separated by two‐dimensional gel electrophoresis or one‐dimensional SDS–PAGE, followed by in‐gel tryptic digestion. In order to overcome the disadvantage of in‐gel digestion and to carry out further in‐depth proteomic analysis of the zymogen granules, in this study, by combining a filter‐aided sample preparation method and fully automated 2D‐LC‐MS/MS technique, 800 ZG proteins were identified with at least two unique peptides for each protein, 75% of which have not been previously reported. The identified proteins revealed broad diversity in protein identity and function. This is the largest dataset of ZG proteome, and also the first dataset of the mouse ZG proteome, which may help elucidate on the molecular architecture of ZGs and their functions. Copyright © 2012 John Wiley & Sons, Ltd.     

Determination of trans,trans‐muconic acid in workers' urine through ultra‐performance liquid chromatography coupled to tandem mass spectrometry

A novel method for the biological monitoring of benzene‐exposed workers has been developed through ultra‐performance liquid chromatography coupled to tandem mass spectrometry. The method uses trans,trans‐muconic acid in urine as the benzene‐exposure biomarker. The method was developed using a triple quadrupole mass spectrometer with enough sensitivity to facilitate diluting and injecting the urine samples directly, rather than performing a solid‐phase extraction procedure as is common in the available protocols. Moreover, compared with a conventional high‐pressure liquid chromatography system, the separation power provided by the ultra‐performance liquid chromatography system allows a 10‐fold reduction in run time. The method was adjusted to a dynamic range of between 198.9 and 4916.7 µg/L to cover the biological exposure index of trans,trans‐muconic acid in urine. Also, the method demonstrated intra‐day and inter‐day precision at 98%, and accuracy within an acceptable range of 101 ± 8%. The method has been used to quantify various types of urine samples, such as workers' urine and inter‐laboratory proficiency tests. Depending on the sample, the quantified levels ranged from less than the limit of quantitation to 3836.7 µg/L. No levels exceeding the calibration range were detected in the urine of workers, and the reported concentrations in urine for the proficiency tests were, as expected, based on known values. Moreover, the new method using sample dilution and faster chromatographic run was more effective, facilitating fast communication of results, as needed, to decision‐makers. Copyright © 2012 John Wiley & Sons, Ltd.     

Identification of metabolites in WZS‐miniature pig urine after oral administration of Danshen decoction by HPLC coupled with diode array detection with electrospray ionization tandem ion trap and time‐of‐flight mass spectrometry

Danshen (DS) is a widely used traditional Chinese medicine for treating cardiovascular and cerebrovascular diseases. A simple, rapid and sensitive method was developed for identification of the in vivo metabolites in urine of WZS‐miniature pigs after oral administration of DS decoction by HPLC coupled with diode array detection with electrospray ionization tandem ion trap and time‐of‐flight mass spectrometry. This method has been successfully applied to simultaneous identification of 50 compounds (including 11 new ones) in pig urine. In addition, one new compound, (3‐hydroxyphenyl) crylic acid glycine methyl ester (C1), along with eight known ones were first isolated by column chromatography and identified by spectroscopic means, including 1D/2DNMR and mass spectrometry, as reference substances. Ten phenolic compounds (protocatechuic aldehyde, protocatechuic acid, caffeic acid, danshensu, ferulic acid, isoferulic acid, rosmarinic acid and salvianolic acid A/B/D) were found to be the main absorbed original constituents of DS decoction, which underwent the metabolic reactions of glucuronidation, sulfation, methylation, hydrogenation and glycine conjugation in vivo. In conclusion, the developed method is applicable to the analysis and identification of constituents in biological matrices after administration of DS decoction. Copyright © 2012 John Wiley & Sons, Ltd.     

Chiral analytical method development and application to pre‐clinical pharmacokinetics of pinocembrin

An analytical method enabling the detection and quantification of the individual enantiomers of racemic (±) pinocembrin is required to fully characterize its pharmacokinetic disposition. Direct resolution of the enantiomers of pinocembrin was achieved using a novel and simple reversed‐phase high‐performance liquid chromatography method with electrospray ionization and detection by mass spectrometry in rat serum. A Chiralcel® AD‐RH column was employed to perform baseline separation with electrospray positive‐mode ionization with selected ion monitoring detection. The standard curves were linear from 0.5 to 100 µg/mL for each enantiomer. The limit of quantification was 0.5 µg/mL. The assay was applied successfully to stereoselective serum disposition of pinocembrin enantiomers in rats. Pinocembrin enantiomers were detected in serum. Both enantiomers had a serum half‐life of ~15 min in rats. Similar values of volume of distribution between the enantiomers were also observed: 1.76 L/kg for S‐pinocembrin and 1.79 L/kg for R‐pinocembrin. Total clearance was 5.527 L//h/kg for S‐pinocembrin and 5.535 L/h/kg for R‐pinocembrin, and the area under the curve was 1.821 µg h/mL for S‐pinocembrin and 1.876 µg h/mL for R‐pinocembrin. The large volume of distribution coupled with the short serum half‐life suggests extensive distribution of pinocembrin into the tissues. Copyright © 2012 John Wiley & Sons, Ltd.     

Determination of PF‐04620110, a novel inhibitor of diacylglycerol acyltransferase‐1, in rat plasma using liquid chromatography–tandem mass spectrometry and its application in pharmacokinetic studies

In this study, we developed a method for the determination of PF‐04620110 (2‐{(1r,4r)‐4‐[4‐(4‐amino‐5‐oxo‐7,8‐dihydropyrimido[5,4‐f][1,4]oxazepin‐6(5H)‐yl)phenyl]cyclohexyl}acetic acid), a novel diacylglycerol acyltransferase 1 (DGAT‐1) inhibitor, in rat plasma and validated it using liquid chromatography–tandem mass spectrometry (LC‐MS/MS). Rat plasma samples were processed following a protein precipitation method by using acetonitrile and were then injected into an LC‐MS/MS system for quantification. PF‐04620110 and imipramine (internal standard) were separated using a Hypersil Gold C₁₈ column, with a mixture of acetonitrile and 10 mm ammonium formate (90:10, v/v) as the mobile phase. The ion transitions monitored in positive‐ion mode [M + H]⁺ of multiple‐reaction monitoring were m/z 397.0 → 260.2 for PF‐04620110 and m/z 280.8 → 86.0 for imipramine. The detector response was specific and linear for PF‐04620110 at concentrations within the range 0.05–50 µg/mL and the signal‐to‐noise ratios for the samples were ≥10. The intra‐ and inter‐day precision and accuracy of the method matched the acceptance criteria for assay validation. PF‐04620110 was stable under various processing and/or handling conditions. PF‐04620110 concentrations in the rat plasma samples could be measured up to 24 h after intravenous or oral administration of PF‐04620110, suggesting that the assay is useful for pharmacokinetic studies in rats. Copyright © 2013 John Wiley & Sons, Ltd.     

Liquid chromatography–tandem mass spectrometry method for simultaneous quantification of urapidil and aripiprazole in human plasma and its application to human pharmacokinetic study

A sensitive and selective liquid chromatography–tandem mass spectrometry (LC–MS/MS) method was developed and validated for simultaneous determination of urapidil and aripiprazole in human plasma. A simple liquid–liquid extraction with ethyl acetate was used for the sample preparation. Chromatographic separation was achieved on a Phenomenex C₁₈ (4.6 × 50 mm, 5 µm) column with 0.1% formic acid–acetonitrile (10:90, v/v) as the mobile phase with flow rate of 0.6 mL/min. The quantitation of the target compounds was determined in a positive ion multiple reaction monitoring mode. Calibration plots were linear over the range of 2.0–2503.95 ng/mL for urapidil and 1.0–500.19 ng/mL for aripiprazole. The lower limit of quantitation for urapidil and aripiprazole was 2.0 and 1.0 ng/mL, respectively. Mean recovery was in the range of 69.94–75.62% for both analytes and internal standards. Intra‐day and inter‐day precisions of the assay at three concentrations were 2.56–5.89% with accuracy of 92.31–97.83% for urapidil, and 3.14–6.84% with accuracy of 91.38–94.42% for aripiprazole. The method was successfully applied to human pharmacokinetic study of urapidil and aripiprazole in healthy human male volunteers. Copyright © 2013 John Wiley & Sons, Ltd.