High-performance liquid chromatographic enantioseparation of methanobenzazocines

Chiral recognition and resolution of methanobenzazocines was investigated by HPLC using polysaccharide, Pirkle-type, native and derivatized β-cyclodextrin chiral stationary phases. Enantioseparation of phenyl substituted 2,6-methanobenzazocines was achieved with multiple chiral stationary phases throughout the classes described. Chiral resolution of the enantiomers of 1,5-methano-3-methyl-6-oxo-1,2,3,4,5,6-hexahydro-3-benzazocine was produced on both polysaccharide and Pirkle-type phases. In the case of 1,5-methano-3-methyl-6-phenyl-1,2,3,4,5,6-hexahydro-3-benzazocine only a dinitrophenyl substituted β-cyclodextrin produced a separation of enantiomers.     

Development and Validation of HPLC,TLC and Derivative Spectrophotometric Methods for the Analysis of Ezetimibe in the Presence of Alkaline Induced Degradation Products

Reversed phase‐high performance liquid chromatography (RP‐HPLC), thin layer chromatography (TLC) densitometry and first derivative spectrophotometry (1D) techniques are developed and validated as a stability‐indicating assay of ezetimibe in the presence of alkaline induced degradation products. RP‐HPLC method involves an isocratic elution on a Phenomenex Luna 5μ C₁₈ column using acetonitrile: water: glacial acetic acid (50:50:0.1 v/v/v) as a mobile phase at a flow rate of 1.5 mL/min. and a UV detector at 235 nm. TLC densitometric method is based on the difference in Rf‐values between the intact drug and its degradation products on aluminum‐packed silica gel 60 F₂₅₄ TLC plates as stationary phase with isopropanol: ammonia 33% (9:1 v/v) as a developing mobile phase. On the fluorescent plates, the spots were located by fluorescence quenching and the densitometric analysis was carried out at 250 nm. Derivative spectrophotometry, the zero‐crossing method, ezetimibe was determined using first derivative at 261 nm in the presence of its degradation products. Calibration graphs of the three suggested methods are linear in the concentration ranges 1–10 mcg/mL, 0.1–1 mg/mL and 1–16 mcg/mL with a mean percentage accuracy of 99.05 ± 0.54%, 99.46 ± 0.63% and 99.24 ± 0.82% of bulk powder, respectively. The three proposed methods were successfully applied for the determination of ezetimibe in raw material and pharmaceutical dosage form; the results were statistically analyzed and compared with those obtained by the reported method. Validation parameters were determined for linearity, accuracy and precision; selectivity and robustness and were assessed by applying the standard addition technique.     

Applications of polymethacrylate-based monoliths in high-performance liquid chromatography

Monolithic columns were introduced in the early 1990s and have become increasingly popular as efficient stationary phases for most of the important chromatographic separation modes. Monoliths are functionally distinct from porous particle-based media in their reliance on convective mass transport. This makes resolution and capacity independent of flow rate. Monoliths also lack a void volume. This eliminates eddy dispersion and permits high-resolution separations with extremely short flow paths. The analytical value of these features is the subject of recent reviews. Nowadays, among other types of rigid macroporous monoliths, the polymethacrylate-based materials are the largest and most examined class of these sorbents. In this review, the applications of polymethacrylate-based monolithic columns are summarized for the separation, purification and analysis of low and high molecular mass compounds in the different HPLC formats, including micro- and large-scale HPLC modes.     

Selectivity comparisons of monolithic silica capillary columns modified with poly(octadecyl methacrylate) and octadecyl moieties for halogenated compounds in reversed-phase liquid chromatography

Stationary phase selectivities for halogenated compounds in reversed-phase HPLC were compared using C18 monolithic silica capillary columns modified with poly(octadecyl methacrylate) (ODM) and octadecyl moieties (ODS). The preferential retention of halogenated benzenes on ODM was observed in methanol/water and acetonitrile/water mobile phases. In selectivity comparison of selected analytes on ODM and ODS, greater selectivities for halogenated compounds were obtained with respect to alkylbenzenes on an ODM column, while similar selectivities were observed with a homologous series of alkylbenzenes on ODM and ODS columns. These data can be explained by greater dispersive interactions by more densely packed octadecyl groups on the ODM polymer coated column together with the contribution of carbonyl groups in ODM side chains. For the positional isomeric separation of dihalogenated benzenes (ortho-, meta-, para-), the ODM column also provided better separation of these isomers for the adjacently eluted isomers that cannot be completely separated on an ODS column in the same mobile phase. These results imply that the ODM column can be used as a better alternative to the ODS column for the separation of other halogenated compounds.     

Determination of ultra-trace amount methyl-, phenyl- and inorganic mercury in environmental and biological samples by liquid chromatography with inductively coupled plasma mass spectrometry after cloud point extraction preconcentration

The cloud point extraction (CPE) preconcentration of ultra-trace amount of mercury species prior to reverse-phase high performance liquid chromatography (HPLC) with inductively coupled plasma mass spectrometry (ICP-MS) detection was studied. Mercury species including methyl-, ethyl-, phenyl- and inorganic mercury were transformed into hydrophobic chelates by reaction with sodium diethyldithiocarbamate, and the hydrophobic chelates were extracted into a surfactant-rich phase of Triton X-114 upon heating in a water bath at 40 °C. Ethylmercury was found partially decomposed during the CPE process, and was not included in the developed method. Various experimental conditions affecting the CPE preconcentration, HPLC separation, and ICP-MS determination were optimized. Under the optimized conditions, detection limits of 13, 8 and 6 ng l⁻¹ (as Hg) were achieved for MeHg⁺, PhHg⁺ and Hg²⁺, respectively. Seven determinations of a standard solution containing the three mercury species each at 0.5 ng ml⁻¹ level produced relative standard deviations of 5.3, 2.3 and 4.4% for MeHg⁺, PhHg⁺ and Hg²⁺, respectively. The developed method was successfully applied for the determination of the three mercury species in environmental water samples and biological samples of human hair and ocean fish.     

郁金药材中姜黄素类成分含量测定方法研究

开展了郁金药材中姜黄素类成分的含量测定的研究,确立了姜黄素的优化提取条件,建立了姜黄素的高效液相色谱含量测定方法。通过筛选,发现以60％乙醇回流,15倍药材溶剂量,提取时间1h,提取次数1次对姜黄素的提取较完全。姜黄素在0．0265～0．2648μg范围内线性关系良好。精密度、稳定性和重复性的RSD均小于2％,平均加标回收率为99。73％,RSD为1．41％。     

Quantitative Determination of Adrenaline Hydrochloride Injection and Noradrenaline Bitartrate Injection by a New HPLC Method via Substitute for Reference Substance

An HPLC method for quantitative determination of adrenaline hydrochloride injection and noradrenaline bitartrate injection was established and validated with a substitute for the reference substance.Phenylephrine hydrochloride was selected as the substitute for the reference substance of adrenaline and noradrenaline bitartrate.The correction factor of phenylephrine hydrochloride with respect to the reference substance of adrenaline and noradrenaline bitartrate was determined under defined conditions.Adrenal...     

使用模拟技术建立海洛因样本的HPLC快速分析方法

采用TRYLAB模拟技术和高效液相色谱技术(HPLC)对实际海洛因样本进行优化,建立一种海洛因样本的HPLC快速分析方法,实现了海洛因样本中7类生物碱的分离,其中海洛因和单乙酰吗啡之间的分离度达到2. 16,海洛因定量曲线的线性相关系数为0. 99993,定量限为0. 001～1. 000 mg/mL;使用该数学模拟技术可以迅速有效地帮助各级实验室建立优化的海洛因HPLC分析方法.     

Sensitive determination of phenols in environmental water samples with SPE packed with bamboo carbon prior to HPLC

Bamboo carbon, an inexpensive, readily available material, has attracted great attention in recent years because of adsorptive properties. In this paper, the potential of bamboo carbon as a SPE adsorbent for the determination of phenols, was investigated. Phenols are important environmental contaminants that may adversely affect human health. Parameters influencing extraction efficiency, including type of eluent, eluent volume, amount of adsorbent, as well as sample pH, volume, and flow rate were investigated and optimized. The optimized results exhibited excellent linear relationships between peak area and phenol concentrations over the range of 2.0–100 ng/mL, with precision between 2.2–7.2%. The LODs were 0.06–0.4 ng/mL for the eight phenols tested. The proposed method has been successfully applied to the analysis of several real‐world environmental water samples. These results indicate that bamboo carbon may be used as a novel SPE adsorbent for the concentration and determination of phenols in real environmental water samples.     

Selectivity differences between alkyl and polar‐modified alkyl phases in reversed phase high performance liquid chromatography

Compared to conventional C18 phases, polar‐modified phases have distinct differences with regards to chromatographic behavior. In the present study, ODS phases and polar‐modified phases were synthesized. The columns containing these new packings demonstrated satisfactory stability under both acidic (pH 1.5) and basic (pH 10) conditions. We evaluated the selectivity differences between alkyl and polar‐modified alkyl RP columns by using a range of neutral analytes. The polar‐modified alkyl phases showed excellent peak shapes for almost all compounds. We also compared the selectivity differences between them for separating nucleotides by using 100% aqueous mobile phase and tricyclic antidepressants in the intermediate pH mobile phases. The results demonstrated that polar‐modified phases display a significantly reduced hydrophobic nature and a significantly reduced silanol activity compared to the conventional C18 phases.