Gamma-ray spectra in the positron-annihilation process of molecules at room temperature

In this study, a fully self-consistent method was developed to obtain the wave functions of the positron and electrons in molecules simultaneously. The wave function of a positron at room temperature, with a characteristic energy of approximately 0.04 eV [1], was used to analyse the experimental results of its annihilation in helium, neon, hydrogen, and methane molecules. The interactions between the positron and molecule provide a significant correction in the gamma-ray spectra of the annihilating electron–positron pairs. It was also observed that high-order correlations offered almost no correction in the spectra, as the interaction between the low-energy positron and electrons cannot drive the electrons into excited electronic states. More accurate studies, which consider the coupling of the positron–electron pair states and vibration states of nuclei, must be undertaken.     

Stationary optical solitons with Sasa–Satsuma equation having nonlinear chromatic dispersion

This paper retrieves stationary optical solitons to Sasa–Satsuma equation that carries nonlinear chromatic dispersion. The solutions are in terms of Gauss' hypergeometric functions and consequently the convergence criteria are also listed.     

Shape stability of a gas bubble in a soft solid

Predicting the onset of non-spherical oscillations of bubbles in soft matter is a fundamental cavitation problem with implications to sonoprocessing, polymeric materials synthesis, and biomedical ultrasound applications. The shape stability of a bubble in a Kelvin-Voigt viscoelastic medium with nonlinear elasticity, the simplest constitutive model for soft solids, is analytically investigated and compared to experiments. Using perturbation methods, we develop a model reducing the equations of motion to two sets of evolution equations: a Rayleigh-Plesset-type equation for the mean (volume-equivalent) bubble radius and an equation for the non-spherical mode amplitudes. Parametric instability is predicted by examining the natural frequency and the Mathieu equation for the non-spherical modes, which are obtained from our model. Our theoretical results show good agreement with published experiments of the shape oscillations of a bubble in a gelatin gel. We further examine the impact of viscoelasticity on the time evolution of non-spherical mode amplitudes. In particular, we find that viscosity increases the damping rate, thus suppressing the shape instability, while shear modulus increases the natural frequency, which changes the unstable mode. We also explain the contributions of rotational and irrotational fields to the viscoelastic stresses in the surroundings and at the bubble surface, as these contributions affect the damping rate and the unstable mode. Our analysis on the role of viscoelasticity is potentially useful to measure viscoelastic properties of soft materials by experimentally observing the shape oscillations of a bubble.     

Sonication enhances the stability of MnO2 nanoparticles on silk film template for enzyme mimic application

We have developed an in-situ method using sonication (3 mm probe sonicator, 30 W, 20 kHz) and auto-reduction (control) to study the mechanism of the formation of manganese dioxide (MnO₂) on a solid template (silk film), and its resulting enzymatic activity on tetramethylbenzidine (TMB) substrate. The fabrication of the silk film was first optimized for stability (no degradation) and optical transparency. A factorial approach was used to assess the effect of sonication time and the initial concentration of potassium permanganate (KMnO₄). The result indicated a significant correlation with a fraction of KMnO₄ consumed and MnO₂ formation. Further, we found that the optimal process conditions to obtain a stable silk film with highly catalytic MnO₂ nanoparticles (NPs) was 30 min of sonication in the presence of 0.5 mM of KMnO₄ at a temperature of 20–24 °C. Under the optimal condition, we monitored in-situ the formation of MnO₂ on the silk film, and after thorough rinsing, the in-situ catalysis of 0.8 mM of TMB substrate. For control, we used the auto-reduction of KMnO₄ onto the silk film after about 16 h. The result from single-wavelength analysis confirmed the different kinetics rates for the formation of MnO₂ via sonication and auto-reduction. The result from the multivariate component analysis indicated a three components route for sonication and auto-reduction to form MnO₂-Silk. Overall, we found that the smaller size, more mono-dispersed, and deeper buried MnO₂ NPs in silk film prepared by sonication, conferred a higher catalytic activity and stability to the hybrid material.     

Effects on the evolution of microstructure and properties of low-silicon cast aluminum alloys in service

ABSTRACT

The microstructure evolution and property change of four kinds of low silicon cast aluminum alloy exposed to heat for 0–50?h at 200°C were studied by means of Brinell hardness test, tensile property test, friction and wear property test and XRD analysis. The results show that with increasing thermal exposure time, the tensile strength of each group of samples decreased and the amount of wear increased. The tensile strength of samples with more Si content decreased slowly. When the time increased to 50?h, the increase of wear loss was the largest. The hardness of samples after thermal exposure increases compared with that before thermal exposure. The residual stress of (311) diffraction crystal surface of AlSi3.5Mg0.66 under different thermal exposure time was measured. The type of residual stress changed from residual tensile stress to residual compressive stress after thermal exposure. There is an abnormal phenomenon that the hardness of the sample increased and the amount of wear increased, and it is evident that the distribution of residual stress was inhomogeneous after thermal exposure. It is found that with increasing thermal exposure time to 50?h, the average lattice distortion ε of the low-index crystal plane and the high-index crystal plane in the aluminum alloys gradually increased.     

Effect of Zr concentration on the mechanical and thermodynamic properties of NbIr3 intermetallic compounds from theoretical estimations

ABSTRACT

The iridium is an important metal which has excellent resistance to corrosion at high temperature. L1₂ intermetallic compounds i.e. Ir₃Nb and Ir₃Zr, with similar lattice parameters are ideal for working at high temperature. They are fully soluble due to their low lattice misfit. A first-principle investigation into the effect of doping Zr with different concentrations on the electronic structure, mechanical and thermodynamic properties of NbIr₃ has been studied to prompt the development of novel high-temperature materials. Nine Zr_xNb_8?xIr₂₄ compounds are carefully considered. The results show that adding Zr into these compounds can strengthen their structural stability and ductility. Nevertheless, it reduces the elastic modulus and elastic stiffness. Simultaneously, with the increase of Zr content, the thermodynamic properties of these compounds decrease. It is also found that the changes of elastic modulus are mainly attributed to the variations of bonds in these compounds.     

超滤、高效液相色谱和毛细管电泳的多维组合用于胎脑垂体组织培养液的分离分析

采用超滤、高效液相色谱和毛细管电泳的多维组合分离分析了胎脑垂体组织培养液的成分，比较了各种工具的不同组合产生的分离效果，考察了获取最多信息量或达到最佳分离的条件，获得了满意结果。     

HPLC分离化学发光检测药物中的马钱子碱、士的宁和麻黄类生物碱

在KMnO₄-H⁺-还原剂体系中研究了马钱子碱、士的宁和麻黄类生物碱的化学发光(CL)行为,建立了其快速灵敏的流动注射化学发光分析方法,将此法与HPLC联用,实现了上述物质的选择性测定,该方法的检出限为1.0×10^-10g/mL马钱子碱、1.0×10^-8g/mL士的宁、1.0×10^-5g/mL麻黄碱和伪麻黄碱,测定的相对标准偏差小于3%,HPLC流动相的脉动及其中的溶解氧不影响测定的精密度。此法已用于一些药物中马钱子碱等生物碱的测定,回收率为94%～101%.     

固相萃取-高效液相色谱法同时检测大米中12种磺酰脲类除草剂的残留

建立了固相萃取前处理净化技术-高效液相色谱（HPLC）同时检测大米中12种磺酰脲类除草剂残留的方法。采用ENVITM-18(C18)硅胶柱和ENVI-Carb(GCB)石墨化碳柱对样品进行净化、萃取,采用C8柱,以乙腈和5 mmol/L 冰乙酸混合溶剂为流动相进行梯度洗脱,在240 nm下进行检测。12种磺酰脲类除草剂在0.01~0.50 μg/g添加范围内的回收率为72.2%~106.5%,相对标准偏差为0.6%~6.4%,检出限为0.01~0.02 μg/g。     

高效液相色谱法测定柑橘汁中的柠檬苦素和柚皮苷

柑橘汁的苦味主要是由于柚皮苷和柠檬苦素的存在所致,其含量的测定可用于控制柑橘类果汁的质量。采用高效液相色谱法在KR100-5C18(4.6 mm i.d.×250 mm,5 μm)上,分别以乙腈-四氢呋喃-水(体积比为17.5∶17.5∶65)和甲醇-冰醋酸-水(体积比为40∶1∶59)为流动相（流速均为1 mL/min）,在207 nm和283 nm检测波长下分别测定了柠檬苦素和柚皮苷。实验结果表明,柠檬苦素在1.00～50.00 mg/L时线性关系良好(r=0.9992),检出限为0.07 μg,平均加标回收率为98.69%,相对标准偏差（RSD）为2.5%;柚皮苷在20.00～160.00 mg/L时线性关系良好(r=0.9988),检出限为0.14 μg,平均加标回收率为100.13%,RSD为1.5%。用该法检测柑橘汁样品中的柠檬苦素与柚皮苷,方法简便、快速、准确。