Isotachophoretic determination of carboxylic acids in biodegradation samples

In the current study a method of isotachophoretic separation of selected carboxylic acids was developed. The method was used for the determination of carboxylated oligo(ethylene glycol)s and their degradation products in biodegradation tests of PEG 250 DA [a mixture of dicarboxylated oligo(ethylene glycol)s]. Two tests were performed in the studies: the Organization for Economic Cooperation and Development (OECD) screening test and the river water die-away test. Both the biodegradation tests proved relatively fast biodegradation of the studied compounds. In the OECD screening test the biodegradation was faster than in the river water die-away test which can be ascribed to a higher concentration of bacteria in the biodegradation liquor. The minimal sample pretreatment and relatively low cost of analysis by the isotachophoretic method used here make it a good alternative to existing methods of carboxylic acids analysis.     

Computational examination of the electrophilic reaction on oxidative polymerization of phenyltrimethylsilane with sulfur chloride

Phenyltrimethylsilane possesses a higher HOMO energy (–9.34 eV) than nonsubstituted benzene (>0.41 eV). The π electron of the phenyltrimethylsilane localizes on the benzene ring at the ipso position rather than at the para position. Two center energies calculated by the MNDO-PM3 method indicate that the C? Si bond is facilitated to cleave in comparison with the C? H (para position) one of the benzene ring. Phenyltrimethylsilane and phenyl bis(trimethylsilane) were polymerized with sulfur chloride through the cationic oxidative polymerization. The product is isolated as oligo(p-phenylene sulfide), with a melting point of 150–190°C. An electrophile attacks the carbon atom linked to the Si atom in phenyltrimethylsilane. The new synthetic route of PPS can be established on the basis of the computational calculation.     

Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

Application of HPLC to measure vanadium in environmental,biological and clinical matrices

Vanadate and vanadium compounds exist in many environmental, biological and clinical matrices, and despite the need only limited progress has been made on the analysis of vanadium compounds. The vanadium coordination chemistry of different oxidation states is known, and the result of the characterization and speciation analysis depends on the subsequent chemistry and the methods of analysis. Many studies have used a range of methods for the characterization and determination of metal ions in a variety of materials. One successful technique is high performance liquid chromatography (HPLC) that has been used mainly for measuring total vanadium level and metal speciation. Some cases have been reported where complexes of different oxidation states of vanadium have been separated by HPLC. Specifically reversed phase (RP) HPLC has frequently been used for the measurement of vanadium. Other HPLC methods such as normal phase, anion-exchange, cation-exchange, size exclusion and other RP-HPLC modes such as, ion-pair and micellar have been used to separate selected vanadium compounds. We will present a review that summarizes and critically analyzes the reported methods for analysis of vanadium salts and vanadium compounds in different sample matrices. We will compare various HPLC methods and modes including sample preparation, chelating reagents, mobile phase and detection methods. The comparison will allow us to identify the best analytical HPLC method and mode for measuring vanadium levels and what information such methods provide with regard to speciation and quantitation of the vanadium compounds.     

Novel anti-inflammatory and wound healing controlled released LDH-Curcumin nanocomposite via intramuscular implantation,in-vivo study

One of the most common problems in wounds is delayed healing and complications such as infection. Therefore, the need for novel materials accelerates the healing of wounds especially abdominal wounds after surgery besides high efficiency and safety is mandatory. The rate of wound healing, anti-inflammatory and biocompatibility of Zn-Al LDH (Zn-Al layer double hydroxide) alone and loaded with Curcumin (Zn-Al LDH/Curcumin) was screened via in-vivo assays through intramuscular implantation in rat abdominal wall with intact peritoneum cavity. The implanted drugs were formed through Curcumin loaded into LDH of Zn-Al with drug release of 56.78 ± 1.51% within 24 h. The synthesized nanocomposite was characterized by (TGA/DTA) thermal analysis, (XRD) X-ray diffraction, (FESEM) Field emission scanning electron microscopy, (HRTEM) high resolution transmission electron microscope, energy dispersive X-ray (EDX) and low-temperature N₂ adsorption, pore volume and average pore size distribution. The integrity of blood circulation, inflammatory signs, wound healing rate, capacity of tissue integration, antigenicity and composite biocompatibility, auto fluorescence ability of collagen bundles and the tensile strength of the muscle were assessed histopathologically after 7 and 30 days’ post-implantation. Excellent wound healing ability was achieved with shortest length between the wound gap edges and higher tensile strength of the muscle. Besides emit florescence very well followed by good healing and tensile muscles strength in Curcumin while very low strength with scar formation in Zn-Al LDH/Curcumin in both acute and chronic wound. No signs of inflammation in Curcumin & Zn-Al LDH. No vessels obstruction or bleeding observed in both Zn-Al LDH and Curcumin more than Zn-Al LDH/Curcumin and control which examined through candling. Good healing & infiltrated immune cells in same groups through histopathological examination. This work supports the anti-inflammatory, wound healing and biocompatibility of both LDH and Curcumin with living matter, increasing their biomedical applications in this era with safety and increasing efficacy with prolonged drug release.     

Quantitative analysis of delta9-tetrahydrocannabinol in preserved oral fluid by liquid chromatography-tandem mass spectrometry

A rapid and sensitive method for the analysis of delta9-tetrahydrocannabinol (THC) in preserved oral fluid was developed and fully validated. Oral fluid was collected with the Intercept, a Food and Drug Administration (FDA) approved sampling device that is used on a large scale in the U.S. for workplace drug testing. The method comprised a simple liquid-liquid extraction with hexane, followed by liquid chromatography-tandem mass spectrometry (LC-MS-MS) analysis. Chromatographic separation was achieved using a XTerra MS C18 column, eluted isocratically with 1 mM ammonium formate-methanol (10:90, v/v). Selectivity of the method was achieved by a combination of retention time, and two precursor-product ion transitions. The use of the liquid-liquid extraction was demonstrated to be highly effective and led to significant decreases in the interferences present in the matrix. Validation of the method was performed using both 100 and 500 MicroL of oral fluid. The method was linear over the range investigated (0.5-100 ng/mL and 0. 1-10 ng/mL when 100 and 500 microL, respectively, of oral fluid were used) with an excellent intra-assay and inter-assay precision (relative standard deviations, RSD <6%) for quality control samples spiked at a concentration of 2.5 and 25 ng/mL and 0.5 and 2.5 ng/mL, respectively. Limits of quantification were 0.5 and 0.1 ng/mL when using 100 and 500 microL, respectively. In contrast to existing GC-MS methods, no extensive sample clean-up and time-consuming derivatisation steps were needed. The method was subsequently applied to Intercept samples collected at the roadside and collected during a controlled study with cannabis.     

氧芴三苯胺多枝分子的双光子吸收与电化学行为

研究了3个氧芴/三苯胺衍生物: E-2,8-双(4-二苯胺基苯乙烯基)氧芴(简称OT-G1)、E-2,8-双[4-(二苯基氨基-二苯乙烯基)(4’-溴苯基)氨基-苯乙烯基]氧芴(简称OT-G1.5)和E-2,8-双-[4’,4″-二-(二苯胺基苯乙烯基)-4-二苯胺基苯乙烯基]氧芴(简称OT-G2)的双光子吸收和电化学行为. 研究结果表明, 分子“代数”从1→1.5→2增高, 氧芴三苯胺多枝分子的HOMO能级升高、双光子荧光强度和双光子吸收截面明显增大. 由于HOMO能级的升高有利于分子的电荷转移, 因而分子表现出强的双光子吸收能力, 这表明可通过电化学行为来推断出分子的双光子吸收性能.     

螺栓连接的梁–弹簧模型及各齿承载分布

螺栓各齿承载分布严重不均,内外螺纹啮合的第一齿承载较大且齿根存在应力集中,易造成螺栓杆横断失效。本文通过对螺栓连接的受力变形分析,建立梁–弹簧模型,推导了理论模型的力学方程组,并基于此模型编程计算,求解得到螺栓连接件在使用过程中各齿承载的分布情况和齿根应力集中系数。最后进行有限元仿真,对比理论模型和有限元的结果,两者误差在工程可接受范围之内。研究表明,螺栓连接的组合梁–弹簧模型是合理有效的。

     

乐山泥岩的水土曲线和崩解特征试验研究

红层软岩的崩解性引发显著的软岩风化破裂现象,经常导致坡体不稳定、岩石崩落等不良地质现象。为深入理解泥岩的水土特征曲线（soil and water characteristic curve,SWCC）和浸水崩解特征,以乐山红层泥岩为例,采用滤纸法、浸水法等试验方法系统研究了泥岩的SWCC以及其在水中崩解的特征,构建了适合于该地区的SWCC模型,并讨论了浸水时间对泥岩崩解质量、颗粒级配的影响。结果表明：（1）泥岩的SWCC呈单峰曲线,随着含水率的减少,基质吸力增大。（2）通过与4种典型率定曲线的拟合比较,基质吸力拟合结果表现出良好的相关性（R²≥92%）,其中Fredlund &; Xing模型能够更准确地反映该地区泥岩的SWCC（R²=96%）。（3）浸水试验表明,0~6 h为快速崩解期,6~12 h为慢速崩解期,12 h后为长期崩解期。干湿交替浸水可以加速泥岩在亲水初期的崩解速率,但在最终崩解量方面与持续浸水基本一致。（4）浸水崩解后,颗粒粒径变化主要集中在2～20 mm范围内,级配曲线D₆₀,D₃₀,D₁₀和C_u值随着浸水时间的增大而减少,表明泥岩颗粒粒径随时间逐渐减小。（5）该泥岩耐崩解指数拟合公式为${y}$=1.17e^–0.22x,拟合度良好（R²≥99%）,根据I_d2=0.76判断该地区泥岩崩解性为弱~中等崩解性。该成果可为该地区泥岩的水土特性和崩解特性提供重要的定量数据支持,以及为该地区工程建设提供理论依据。